Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

VALTEC Axial fittings

Home→ Catalog→ VALTEC→ Multilayer systems→ Axial fittings

VALTEC axial fittings are used to create one-piece connections in drinking water supply systems, heating and hot water supply systems, domestic water supply, as well as on process pipelines that transport wastewater that is not aggressive to the materials of pipes and axial fittings.

They are suitable for pipes made of cross-linked polyethylene PEX and PE of increased heat resistance PERT series S3.2 (SDR 7.4) (corresponding to GOST 32415-2013).

Main advantages of VALTEC axial fittings:

  • the diameter of the connected pipelines is not narrowed;
  • high reliability and simplicity;
  • tightness;
  • quick and easy installation;
  • pipe material is a sealant;
  • monolithic is possible;
  • the joint can be pressurized immediately after installation.

Working pressure: 16 bar.

Maximum operating temperature: +95 °С.

Average service life: 50 years.

Photo Наименование Article Цена
Photo Draft
Photo VALTEC Sliding connector with female thread, d - 25*3,5, d1 - 1" [Code number: VTm.402.G.002506] Draft VALTEC Sliding connector with female thread, d - 25*3,5, d1 - 1" [Code number: VTm.402.G.002506]
VALTEC Sliding connector with female thread, d - 25*3,5, d1 - 1" [Code number: VTm.402.G.002506]
Details 		VTm.402.G.002506 471 rub
Photo Draft
Photo VALTEC Sliding connector, d - 32*4,4, d1 - 3/4", with female thread [Code number: VTm.402.G.003205] Draft VALTEC Sliding connector, d - 32*4,4, d1 - 3/4", with female thread [Code number: VTm.402.G.003205]
VALTEC Sliding connector, d - 32*4,4, d1 - 3/4", with female thread [Code number: VTm.402.G.003205]
Details 		VTm.402.G.003205 416 rub
Photo Draft
Photo VALTEC Sliding connector, d - 32*4,4, d1 - 1", with female thread [Code number: VTm.402.G.003206] Draft VALTEC Sliding connector, d - 32*4,4, d1 - 1", with female thread [Code number: VTm.402.G.003206]
VALTEC Sliding connector, d - 32*4,4, d1 - 1", with female thread [Code number: VTm.402.G.003206]
Details 		VTm.402.G.003206 552 rub
Photo Draft
Photo VALTEC Sliding connector, d - 16*2,2, d1 - 16*2,2 [Code number: VTm.403.BG.001616] Draft VALTEC Sliding connector, d - 16*2,2, d1 - 16*2,2 [Code number: VTm.403.BG.001616]
VALTEC Sliding connector, d - 16*2,2, d1 - 16*2,2 [Code number: VTm.403.BG.001616]
Details 		VTm.403.BG.001616 168 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А С1 C2 D1 D2
mm mm mm mm mm
44 15,8 15,8 10 10

Documentation

Download data sheet: VALTEC Sliding connector VTm.403.BG.001616
Photo Draft
Photo VALTEC Sliding connector reducing, d - 20(2,8), d1 - 16(2,2) [Code number: VTm.403.BG.002016] Draft VALTEC Sliding connector reducing, d - 20(2,8), d1 - 16(2,2) [Code number: VTm.403.BG.002016]
VALTEC Sliding connector reducing, d - 20(2,8), d1 - 16(2,2) [Code number: VTm.403.BG.002016]
Details 		VTm.403.BG.002016 245 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А С1 C2 D1 D2
mm mm mm mm mm
50 20 17 12,6 10

Documentation

Download data sheet: VALTEC Sliding connector VTm.403.BG.002016
Photo Draft
Photo VALTEC Sliding connector, d - 20(2,8), d1 - 20(2,8) [Code number: VTm.403.BG.002020] Draft VALTEC Sliding connector, d - 20(2,8), d1 - 20(2,8) [Code number: VTm.403.BG.002020]
VALTEC Sliding connector, d - 20(2,8), d1 - 20(2,8) [Code number: VTm.403.BG.002020]
Details 		VTm.403.BG.002020 271 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А С1 C2 D1 D2
mm mm mm mm mm
55 20 20 12,6 12,6

Documentation

Download data sheet: VALTEC Sliding connector VTm.403.BG.002020
Photo Draft
Photo VALTEC Sliding connector reducing, d - 25(3,5), d1 - 16(2,2) [Code number: VTm.403.BG.002516] Draft VALTEC Sliding connector reducing, d - 25(3,5), d1 - 16(2,2) [Code number: VTm.403.BG.002516]
VALTEC Sliding connector reducing, d - 25(3,5), d1 - 16(2,2) [Code number: VTm.403.BG.002516]
Details 		VTm.403.BG.002516 356 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А С1 C2 D1 D2
mm mm mm mm mm
57 27 15,8 15,4 10

Documentation

Download data sheet: VALTEC Sliding connector VTm.403.BG.002516
Photo Draft
Photo VALTEC Sliding connector reducing, d - 25(3,5), d1 - 20(2,8) [Code number: VTm.403.BG.002520] Draft VALTEC Sliding connector reducing, d - 25(3,5), d1 - 20(2,8) [Code number: VTm.403.BG.002520]
VALTEC Sliding connector reducing, d - 25(3,5), d1 - 20(2,8) [Code number: VTm.403.BG.002520]
Details 		VTm.403.BG.002520 381 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А С1 C2 D1 D2
mm mm mm mm mm
62 27 20 15,4 12,6

Documentation

Download data sheet: VALTEC Sliding connector VTm.403.BG.002520
Photo Draft
Photo VALTEC Sliding connector, d - 25(3,5), d1 - 25(3,5) [Code number: VTm.403.BG.002525] Draft VALTEC Sliding connector, d - 25(3,5), d1 - 25(3,5) [Code number: VTm.403.BG.002525]
VALTEC Sliding connector, d - 25(3,5), d1 - 25(3,5) [Code number: VTm.403.BG.002525]
Details 		VTm.403.BG.002525 622 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А С1 C2 D1 D2
mm mm mm mm mm
69 27 27 15,4 15,4

Documentation

Download data sheet: VALTEC Sliding connector VTm.403.BG.002525
Photo Draft
Photo VALTEC Direct slip fitting, d - 16(2,2), d1 - 16(2,2) [Code number: VTm.403.G.001616] Draft VALTEC Direct slip fitting, d - 16(2,2), d1 - 16(2,2) [Code number: VTm.403.G.001616]
VALTEC Direct slip fitting, d - 16(2,2), d1 - 16(2,2) [Code number: VTm.403.G.001616]
Details 		VTm.403.G.001616 118 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is lightweight, installation is carried out by hand tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • Made of brass CW614N according to EN 12165;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А С1 C2 D1 D2
mm mm mm mm mm
48 16 16 9,8 9,8

Documentation

Download data sheet: VALTEC Sliding connector VTm.403.G.001616
Photo Draft
Photo VALTEC Sliding connector reducing, d - 20*2,8, d1 - 16*2,2 [Code number: VTm.403.G.002016] Draft VALTEC Sliding connector reducing, d - 20*2,8, d1 - 16*2,2 [Code number: VTm.403.G.002016]
VALTEC Sliding connector reducing, d - 20*2,8, d1 - 16*2,2 [Code number: VTm.403.G.002016]
Details 		VTm.403.G.002016 148 rub
Photo Draft
Photo VALTEC Sliding connector, d - 20*2,8, d1 - 20*2,8 [Code number: VTm.403.G.002020] Draft VALTEC Sliding connector, d - 20*2,8, d1 - 20*2,8 [Code number: VTm.403.G.002020]
VALTEC Sliding connector, d - 20*2,8, d1 - 20*2,8 [Code number: VTm.403.G.002020]
Details 		VTm.403.G.002020 177 rub
Photo Draft
Photo VALTEC Sliding connector reducing, d - 25*3,5, d1 - 16*2,2 [Code number: VTm.403.G.002516] Draft VALTEC Sliding connector reducing, d - 25*3,5, d1 - 16*2,2 [Code number: VTm.403.G.002516]
VALTEC Sliding connector reducing, d - 25*3,5, d1 - 16*2,2 [Code number: VTm.403.G.002516]
Details 		VTm.403.G.002516 211 rub
Photo Draft
Photo VALTEC Sliding connector reducing, d - 25*3,5, d1 - 20*2,8 [Code number: VTm.403.G.002520] Draft VALTEC Sliding connector reducing, d - 25*3,5, d1 - 20*2,8 [Code number: VTm.403.G.002520]
VALTEC Sliding connector reducing, d - 25*3,5, d1 - 20*2,8 [Code number: VTm.403.G.002520]
Details 		VTm.403.G.002520 243 rub
Photo Draft
Photo VALTEC Sliding connector, d - 25*3,5, d1 - 25*3,5 [Code number: VTm.403.G.002525] Draft VALTEC Sliding connector, d - 25*3,5, d1 - 25*3,5 [Code number: VTm.403.G.002525]
VALTEC Sliding connector, d - 25*3,5, d1 - 25*3,5 [Code number: VTm.403.G.002525]
Details 		VTm.403.G.002525 301 rub
Photo Draft
Photo VALTEC Sliding connector, d - 32*4,4, d1 - 20*2,8, reducing [Code number: VTm.403.G.003220] Draft VALTEC Sliding connector, d - 32*4,4, d1 - 20*2,8, reducing [Code number: VTm.403.G.003220]
VALTEC Sliding connector, d - 32*4,4, d1 - 20*2,8, reducing [Code number: VTm.403.G.003220]
Details 		VTm.403.G.003220 344 rub
Photo Draft
Photo VALTEC Sliding connector reducing, d - 32*4,4, d1 - 25*3,5 [Code number: VTm.403.G.003225] Draft VALTEC Sliding connector reducing, d - 32*4,4, d1 - 25*3,5 [Code number: VTm.403.G.003225]
VALTEC Sliding connector reducing, d - 32*4,4, d1 - 25*3,5 [Code number: VTm.403.G.003225]
Details 		VTm.403.G.003225 411 rub
Photo Draft
Photo VALTEC Sliding connector, d - 32*4,4, d1 - 32*4,4 [Code number: VTm.403.G.003232] Draft VALTEC Sliding connector, d - 32*4,4, d1 - 32*4,4 [Code number: VTm.403.G.003232]
VALTEC Sliding connector, d - 32*4,4, d1 - 32*4,4 [Code number: VTm.403.G.003232]
Details 		VTm.403.G.003232 522 rub
Photo Draft
Photo VALTEC Sliding connector with union nut, d - 16*2,2, d1 - 1/2" [Code number: VTm.422.BG.001604] Draft VALTEC Sliding connector with union nut, d - 16*2,2, d1 - 1/2" [Code number: VTm.422.BG.001604]
VALTEC Sliding connector with union nut, d - 16*2,2, d1 - 1/2" [Code number: VTm.422.BG.001604]
Details 		VTm.422.BG.001604 345 rub
Photo Draft
Photo VALTEC Sliding connector with union nut, d - 20(2,8), d1 - 1/2" [Code number: VTm.422.BG.002004] Draft VALTEC Sliding connector with union nut, d - 20(2,8), d1 - 1/2" [Code number: VTm.422.BG.002004]
VALTEC Sliding connector with union nut, d - 20(2,8), d1 - 1/2" [Code number: VTm.422.BG.002004]
Details 		VTm.422.BG.002004 447 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is detachable and maintenance-free;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The union nut is self-sealing and has a gasket;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

G А D L S
  mm mm mm mm
1/2" 40 12,6 20 25

Documentation

Download data sheet: VALTEC Sliding connector VTm.422.BG.002004

See also

Strengthen connecting elements
Connecting elements
PP-adapter Konfix etc.
© Inrusstrade.ru 1999-2025. "Inrusstrade" Ltd. Copying and quoting is prohibited