Logo
Ru| En

Valtec radiator connectors for multilayer pipes

Home→ Catalog→ VALTEC→ Multilayer systems→ Radiator connectors

This product group includes the following products:

  • Radiator press T-pieces - they are equipped with chrome-plated brass pipe with a wall thickness of 1 mm. They can have left and right execution. The outer diameter of the brass pipe is 15 mm.
  • Radiator press elbow with chrome-plated brass pipe - this connector is designed to connect the heater to the multilayer pipeline. They are available in left or right version. The outer diameter of the brass pipe is 15 mm, the wall thickness is 1 mm.
  • Straight radiator elbow with chrome-plated brass pipe – this press fitting is equipped with a long (70 cm) or short (30 cm) chrome-plated pipe.
Photo Name Article Price
Photo Draft
Photo VALTEC radiator elbow with chrome-plated brass pipe 15 mm, length 300 mm, d - 16х15 (left) [Code number: VTm.281.LN.001615] Draft VALTEC radiator elbow with chrome-plated brass pipe 15 mm, length 300 mm, d - 16х15 (left) [Code number: VTm.281.LN.001615]
VALTEC radiator elbow with chrome-plated brass pipe 15 mm, length 300 mm, d - 16х15 (left) [Code number: VTm.281.LN.001615]
Details 		VTm.281.LN.001615 824 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D1 D2 Weight
mm mm mm mm kg/pc
42 300 16 15 0,201

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC radiator elbow with chrome-plated brass pipe 15 mm, length 300 mm, d - 20х15 (left) [Code number: VTm.281.LN.002015] Draft VALTEC radiator elbow with chrome-plated brass pipe 15 mm, length 300 mm, d - 20х15 (left) [Code number: VTm.281.LN.002015]
VALTEC radiator elbow with chrome-plated brass pipe 15 mm, length 300 mm, d - 20х15 (left) [Code number: VTm.281.LN.002015]
Details 		VTm.281.LN.002015 1 031 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D1 D2 Weight
mm mm mm mm kg/pc
44 300 20 15 0,208

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC radiator elbow with chrome-plated brass pipe 15 mm, length 700 mm, long, d - 16х15 [Code number: VTm.281.PHN.001615] Draft VALTEC radiator elbow with chrome-plated brass pipe 15 mm, length 700 mm, long, d - 16х15 [Code number: VTm.281.PHN.001615]
VALTEC radiator elbow with chrome-plated brass pipe 15 mm, length 700 mm, long, d - 16х15 [Code number: VTm.281.PHN.001615]
Details 		VTm.281.PHN.001615 1 661 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D1 D2 Weight
mm mm mm mm kg/pc
42 700 20 15 0,348

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC radiator elbow with chrome-plated brass pipe 15 mm, length 700 mm, long, d - 20х15 [Code number: VTm.281.PHN.002015] Draft VALTEC radiator elbow with chrome-plated brass pipe 15 mm, length 700 mm, long, d - 20х15 [Code number: VTm.281.PHN.002015]
VALTEC radiator elbow with chrome-plated brass pipe 15 mm, length 700 mm, long, d - 20х15 [Code number: VTm.281.PHN.002015]
Details 		VTm.281.PHN.002015 1 907 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D1 D2 Weight
mm mm mm mm kg/pc
44 700 20 15 0,358

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC radiator elbow with chrome-plated brass pipe 15 mm, length 300 mm, short, d - 16х15 [Code number: VTm.281.PN.001615] Draft VALTEC radiator elbow with chrome-plated brass pipe 15 mm, length 300 mm, short, d - 16х15 [Code number: VTm.281.PN.001615]
VALTEC radiator elbow with chrome-plated brass pipe 15 mm, length 300 mm, short, d - 16х15 [Code number: VTm.281.PN.001615]
Details 		VTm.281.PN.001615 847 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D1 D2 Weight
mm mm mm mm kg/pc
42 300 16 15 0,211

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC radiator elbow with chrome-plated brass pipe 15 mm, length 300 mm, short, d - 20х15 [Code number: VTm.281.PN.002015] Draft VALTEC radiator elbow with chrome-plated brass pipe 15 mm, length 300 mm, short, d - 20х15 [Code number: VTm.281.PN.002015]
VALTEC radiator elbow with chrome-plated brass pipe 15 mm, length 300 mm, short, d - 20х15 [Code number: VTm.281.PN.002015]
Details 		VTm.281.PN.002015 1 082 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D1 D2 Weight
mm mm mm mm kg/pc
44 300 16 15 0,222

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC radiator elbow with chrome-plated brass pipe 15 mm, length 300 mm, d - 16х15 (right) [Code number: VTm.281.RN.001615] Draft VALTEC radiator elbow with chrome-plated brass pipe 15 mm, length 300 mm, d - 16х15 (right) [Code number: VTm.281.RN.001615]
VALTEC radiator elbow with chrome-plated brass pipe 15 mm, length 300 mm, d - 16х15 (right) [Code number: VTm.281.RN.001615]
Details 		VTm.281.RN.001615 851 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D1 D2 Weight
mm mm mm mm kg/pc
42 300 16 15 0,201

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC radiator elbow with chrome-plated brass pipe 15 mm, length 300 mm, d - 20х15 (right) [Code number: VTm.281.RN.002015] Draft VALTEC radiator elbow with chrome-plated brass pipe 15 mm, length 300 mm, d - 20х15 (right) [Code number: VTm.281.RN.002015]
VALTEC radiator elbow with chrome-plated brass pipe 15 mm, length 300 mm, d - 20х15 (right) [Code number: VTm.281.RN.002015]
Details 		VTm.281.RN.002015 1 081 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D1 D2 Weight
mm mm mm mm kg/pc
44 300 20 15 0,208

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC Radiator T-piece, pressing connection, with chrome-plated brass pipe 15 mm, length 700 mm, long, d - 16х15х16 [Code number: VTm.282.HN.161516] Draft VALTEC Radiator T-piece, pressing connection, with chrome-plated brass pipe 15 mm, length 700 mm, long, d - 16х15х16 [Code number: VTm.282.HN.161516]
VALTEC Radiator T-piece, pressing connection, with chrome-plated brass pipe 15 mm, length 700 mm, long, d - 16х15х16 [Code number: VTm.282.HN.161516]
Details 		VTm.282.HN.161516 1 450 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D1 D2 D3 Weight
mm mm mm mm mm kg/pc
83 700 16 16 15 0,383

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC Radiator T-piece, pressing connection, with chrome-plated brass pipe 15 mm, length 700 mm, long, d - 20х15х20 [Code number: VTm.282.HN.201520] Draft VALTEC Radiator T-piece, pressing connection, with chrome-plated brass pipe 15 mm, length 700 mm, long, d - 20х15х20 [Code number: VTm.282.HN.201520]
VALTEC Radiator T-piece, pressing connection, with chrome-plated brass pipe 15 mm, length 700 mm, long, d - 20х15х20 [Code number: VTm.282.HN.201520]
Details 		VTm.282.HN.201520 1 755 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D1 D2 D3 Weight
mm mm mm mm mm kg/pc
88 700 20 20 15 0,402

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC Radiator T-piece, pressing connection, with chrome-plated brass pipe 15 mm, length 700 mm, left long, d - 20х15х16 [Code number: VTm.282.LHN.201516] Draft VALTEC Radiator T-piece, pressing connection, with chrome-plated brass pipe 15 mm, length 700 mm, left long, d - 20х15х16 [Code number: VTm.282.LHN.201516]
VALTEC Radiator T-piece, pressing connection, with chrome-plated brass pipe 15 mm, length 700 mm, left long, d - 20х15х16 [Code number: VTm.282.LHN.201516]
Details 		VTm.282.LHN.201516 1 525 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D1 D2 D3 Weight
mm mm mm mm mm kg/pc
85 700 16 20 15 0,387

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC Radiator T-piece, pressing connection, with chrome-plated brass pipe 15 mm, length 300 mm, left short, d - 20х15х16 [Code number: VTm.282.LN.201516] Draft VALTEC Radiator T-piece, pressing connection, with chrome-plated brass pipe 15 mm, length 300 mm, left short, d - 20х15х16 [Code number: VTm.282.LN.201516]
VALTEC Radiator T-piece, pressing connection, with chrome-plated brass pipe 15 mm, length 300 mm, left short, d - 20х15х16 [Code number: VTm.282.LN.201516]
Details 		VTm.282.LN.201516 1 118 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D1 D2 D3 Weight
mm mm mm mm mm kg/pc
85 300 16 20 15 0,241

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC Radiator T-piece, pressing connection, with chrome-plated brass pipe 15 mm, length 300 mm, short, d - 16х15х16 [Code number: VTm.282.N.161516] Draft VALTEC Radiator T-piece, pressing connection, with chrome-plated brass pipe 15 mm, length 300 mm, short, d - 16х15х16 [Code number: VTm.282.N.161516]
VALTEC Radiator T-piece, pressing connection, with chrome-plated brass pipe 15 mm, length 300 mm, short, d - 16х15х16 [Code number: VTm.282.N.161516]
Details 		VTm.282.N.161516 1 145 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D1 D2 D3 Weight
mm mm mm mm mm kg/pc
83 300 16 16 15 0,231

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC Radiator T-piece, pressing connection, with chrome-plated brass pipe 15 mm, length 300 mm, short, d - 20х15х20 [Code number: VTm.282.N.201520] Draft VALTEC Radiator T-piece, pressing connection, with chrome-plated brass pipe 15 mm, length 300 mm, short, d - 20х15х20 [Code number: VTm.282.N.201520]
VALTEC Radiator T-piece, pressing connection, with chrome-plated brass pipe 15 mm, length 300 mm, short, d - 20х15х20 [Code number: VTm.282.N.201520]
Details 		VTm.282.N.201520 1 226 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D1 D2 D3 Weight
mm mm mm mm mm kg/pc
88 300 20 20 15 0,255

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC Radiator T-piece, pressing connection, with chrome-plated brass pipe 15 mm, length 700 mm, right long, d - 20х15х16 [Code number: VTm.282.RHN.201516] Draft VALTEC Radiator T-piece, pressing connection, with chrome-plated brass pipe 15 mm, length 700 mm, right long, d - 20х15х16 [Code number: VTm.282.RHN.201516]
VALTEC Radiator T-piece, pressing connection, with chrome-plated brass pipe 15 mm, length 700 mm, right long, d - 20х15х16 [Code number: VTm.282.RHN.201516]
Details 		VTm.282.RHN.201516 1 581 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D1 D2 D3 Weight
mm mm mm mm mm kg/pc
85 700 16 20 15 0,387

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC Radiator T-piece, pressing connection, with chrome-plated brass pipe 15 mm, length 300 mm, right short, d - 20х15х16 [Code number: VTm.282.RN.201516] Draft VALTEC Radiator T-piece, pressing connection, with chrome-plated brass pipe 15 mm, length 300 mm, right short, d - 20х15х16 [Code number: VTm.282.RN.201516]
VALTEC Radiator T-piece, pressing connection, with chrome-plated brass pipe 15 mm, length 300 mm, right short, d - 20х15х16 [Code number: VTm.282.RN.201516]
Details 		VTm.282.RN.201516 1 118 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D1 D2 D3 Weight
mm mm mm mm mm kg/pc
85 300 16 20 15 0,241

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo
Photo [PART NUMBER REPLACED WITH VTm.281.PHN.001615] - VALTEC Elbow Radiatorный пресс с латунной chrome-plated. трубкой 15 mm, length 700 mm, длинный, d - 16, d1 - 15 [Code number: VTm.281.HN.001615]
[PART NUMBER REPLACED WITH VTm.281.PHN.001615] - VALTEC Elbow Radiatorный пресс с латунной chrome-plated. трубкой 15 mm, length 700 mm, длинный, d - 16, d1 - 15 [Code number: VTm.281.HN.001615]
Details 		VTm.281.HN.001615
Photo
Photo [ARTICLE REPLACED WITH VTm.281.PHN.002015] - VALTEC Elbow Radiatorный пресс с латунной chrome-plated. трубкой 15 mm, length 700 mm, длинный, d - 20, d1 - 15 (price on request) [Code number: VTm.281.HN.002015]
[ARTICLE REPLACED WITH VTm.281.PHN.002015] - VALTEC Elbow Radiatorный пресс с латунной chrome-plated. трубкой 15 mm, length 700 mm, длинный, d - 20, d1 - 15 (price on request) [Code number: VTm.281.HN.002015]
Details 		VTm.281.HN.002015

See also

%d0%a3%d1%81%d0%b8%d0%bb%d0%b8%d0%b2%d0%b0%d1%8e%d1%89%d0%b8%d0%b5 %d0%a5%d0%be%d0%bc%d1%83%d1%82%d1%8b
Strengthen connecting elements
%d0%9f%d0%b5%d1%80%d0%b5%d1%85%d0%be%d0%b4%d1%8b %d0%bd%d0%b0 %d0%bf%d0%bb%d0%b0%d1%81%d1%82%d0%b8%d0%ba
PP-adapter Konfix etc.
%d0%a1%d0%be%d0%b5%d0%b4%d0%b8%d0%bd%d0%b8%d1%82%d0%b5%d0%bb%d1%8c%d0%bd%d1%8b%d0%b5 %d0%a5%d0%be%d0%bc%d1%83%d1%82%d1%8b
Connecting elements

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited