Logo
Ru| En

Valtec brass adapter unions for multilayer pipes

Home→ Catalog→ VALTEC→ Multilayer systems→ Adapter unions

Valtec adapter unions are connecting elements which are used when the installation of multilayer piping systems.

The group of products includes the following types of fittings:

  • Straight adapter unions with male or female thread - the thread corresponds to the state standards.
  • Straight adapter unions.
  • Adapters with union nut.

All adapter unions are made of high quality brass. They can be equipped with a sealing ring of EPDM.

Maximum working pressure is 10 bar.

Photo Name Article Price
Photo
Photo (OUT OF PRODUCTION) - VALTEC Adapter union with male thread, d - 16х1/2" [Code number: MKm.201.Y.001604]
(OUT OF PRODUCTION) - VALTEC Adapter union with male thread, d - 16х1/2" [Code number: MKm.201.Y.001604]
Details 		MKm.201.Y.001604
Photo
Photo (OUT OF PRODUCTION) - VALTEC Adapter union with male thread, d - 20х1/2" [Code number: MKm.201.Y.002004]
(OUT OF PRODUCTION) - VALTEC Adapter union with male thread, d - 20х1/2" [Code number: MKm.201.Y.002004]
Details 		MKm.201.Y.002004
Photo
Photo (OUT OF PRODUCTION) - VALTEC Adapter union with female thread, d - 16х1/2" [Code number: MKm.202.Y.001604]
(OUT OF PRODUCTION) - VALTEC Adapter union with female thread, d - 16х1/2" [Code number: MKm.202.Y.001604]
Details 		MKm.202.Y.001604
Photo
Photo (OUT OF PRODUCTION) - VALTEC Adapter union with female thread, d - 20х1/2" [Code number: MKm.202.Y.002004]
(OUT OF PRODUCTION) - VALTEC Adapter union with female thread, d - 20х1/2" [Code number: MKm.202.Y.002004]
Details 		MKm.202.Y.002004
Photo
Photo (OUT OF PRODUCTION) - VALTEC Adapter union with male thread, d - 16х1/2" [Code number: MKm.301.Y.001604]
(OUT OF PRODUCTION) - VALTEC Adapter union with male thread, d - 16х1/2" [Code number: MKm.301.Y.001604]
Details 		MKm.301.Y.001604
Photo
Photo (OUT OF PRODUCTION) - VALTEC Adapter union with male thread, d - 20х1/2" [Code number: MKm.301.Y.002004]
(OUT OF PRODUCTION) - VALTEC Adapter union with male thread, d - 20х1/2" [Code number: MKm.301.Y.002004]
Details 		MKm.301.Y.002004
Photo
Photo (OUT OF PRODUCTION) - VALTEC Adapter union with male thread, d - 20х3/4" [Code number: MKm.301.Y.002005]
(OUT OF PRODUCTION) - VALTEC Adapter union with male thread, d - 20х3/4" [Code number: MKm.301.Y.002005]
Details 		MKm.301.Y.002005
Photo
Photo (OUT OF PRODUCTION) - VALTEC Adapter union with female thread, d - 16х1/2" [Code number: MKm.302.Y.001604]
(OUT OF PRODUCTION) - VALTEC Adapter union with female thread, d - 16х1/2" [Code number: MKm.302.Y.001604]
Details 		MKm.302.Y.001604
Photo
Photo (OUT OF PRODUCTION) - VALTEC Adapter union with female thread, d - 20х1/2" [Code number: MKm.302.Y.002004]
(OUT OF PRODUCTION) - VALTEC Adapter union with female thread, d - 20х1/2" [Code number: MKm.302.Y.002004]
Details 		MKm.302.Y.002004
Photo
Photo (OUT OF PRODUCTION) - VALTEC Adapter union with female thread, d - 20х3/4" [Code number: MKm.302.Y.002005]
(OUT OF PRODUCTION) - VALTEC Adapter union with female thread, d - 20х3/4" [Code number: MKm.302.Y.002005]
Details 		MKm.302.Y.002005
Photo Draft
Photo VALTEC Adapter union with male thread, d - 16х1/2" [Code number: VTm.201.N.001604] Draft VALTEC Adapter union with male thread, d - 16х1/2" [Code number: VTm.201.N.001604]
VALTEC Adapter union with male thread, d - 16х1/2" [Code number: VTm.201.N.001604]
Details 		VTm.201.N.001604 237 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D G Weight
mm mm mm   kg/pc
48 13 16 1/2" 0,055

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC Adapter union with male thread, d - 16х3/4" [Code number: VTm.201.N.001605] Draft VALTEC Adapter union with male thread, d - 16х3/4" [Code number: VTm.201.N.001605]
VALTEC Adapter union with male thread, d - 16х3/4" [Code number: VTm.201.N.001605]
Details 		VTm.201.N.001605 345 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D G Weight
mm mm mm   kg/pc
49 14 16 3/4" 0,071

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC Adapter union with male thread, d - 20х1/2" [Code number: VTm.201.N.002004] Draft VALTEC Adapter union with male thread, d - 20х1/2" [Code number: VTm.201.N.002004]
VALTEC Adapter union with male thread, d - 20х1/2" [Code number: VTm.201.N.002004]
Details 		VTm.201.N.002004 376 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D G Weight
mm mm mm   kg/pc
48 13 20 1/2" 0,081

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC Adapter union with male thread, d - 20х3/4" [Code number: VTm.201.N.002005] Draft VALTEC Adapter union with male thread, d - 20х3/4" [Code number: VTm.201.N.002005]
VALTEC Adapter union with male thread, d - 20х3/4" [Code number: VTm.201.N.002005]
Details 		VTm.201.N.002005 349 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D G Weight
mm mm mm   kg/pc
49 14 20 3/4" 0,078

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC Adapter union with male thread, d - 26х3/4" [Code number: VTm.201.N.002605] Draft VALTEC Adapter union with male thread, d - 26х3/4" [Code number: VTm.201.N.002605]
VALTEC Adapter union with male thread, d - 26х3/4" [Code number: VTm.201.N.002605]
Details 		VTm.201.N.002605 604 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D G Weight
mm mm mm   kg/pc
50 14 26 3/4" 0,116

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC Adapter union with male thread, d - 26х1" [Code number: VTm.201.N.002606] Draft VALTEC Adapter union with male thread, d - 26х1" [Code number: VTm.201.N.002606]
VALTEC Adapter union with male thread, d - 26х1" [Code number: VTm.201.N.002606]
Details 		VTm.201.N.002606 585 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D G Weight
mm mm mm   kg/pc
52 16 26 1" 0,131

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC Adapter union with male thread, d - 32х1" [Code number: VTm.201.N.003206] Draft VALTEC Adapter union with male thread, d - 32х1" [Code number: VTm.201.N.003206]
VALTEC Adapter union with male thread, d - 32х1" [Code number: VTm.201.N.003206]
Details 		VTm.201.N.003206 916 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D G Weight
mm mm mm   kg/pc
52 16 32 1" 0,136

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC Adapter union with male thread, d - 32х1 1/4" [Code number: VTm.201.N.003207] Draft VALTEC Adapter union with male thread, d - 32х1 1/4" [Code number: VTm.201.N.003207]
VALTEC Adapter union with male thread, d - 32х1 1/4" [Code number: VTm.201.N.003207]
Details 		VTm.201.N.003207 1 169 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D G Weight
mm mm mm   kg/pc
57 17 32 1 1/4" 0,234

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC Adapter union with male thread, d - 40х1" [Code number: VTm.201.N.004006] Draft VALTEC Adapter union with male thread, d - 40х1" [Code number: VTm.201.N.004006]
VALTEC Adapter union with male thread, d - 40х1" [Code number: VTm.201.N.004006]
Details 		VTm.201.N.004006 1 247 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D G Weight
mm mm mm   kg/pc
60 17 40 1" 0,237

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC Adapter union with male thread, d - 40х1 1/4" [Code number: VTm.201.N.004007] Draft VALTEC Adapter union with male thread, d - 40х1 1/4" [Code number: VTm.201.N.004007]
VALTEC Adapter union with male thread, d - 40х1 1/4" [Code number: VTm.201.N.004007]
Details 		VTm.201.N.004007 1 357 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D G Weight
mm mm mm   kg/pc
60 17 40 1 1/4" 0,269

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting

See also

%d0%9f%d0%b5%d1%80%d0%b5%d1%85%d0%be%d0%b4%d1%8b %d0%bd%d0%b0 %d0%bf%d0%bb%d0%b0%d1%81%d1%82%d0%b8%d0%ba
PP-adapter Konfix etc.
%d0%a3%d1%81%d0%b8%d0%bb%d0%b8%d0%b2%d0%b0%d1%8e%d1%89%d0%b8%d0%b5 %d0%a5%d0%be%d0%bc%d1%83%d1%82%d1%8b
Strengthen connecting elements
%d0%a1%d0%be%d0%b5%d0%b4%d0%b8%d0%bd%d0%b8%d1%82%d0%b5%d0%bb%d1%8c%d0%bd%d1%8b%d0%b5 %d0%a5%d0%be%d0%bc%d1%83%d1%82%d1%8b
Connecting elements

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited