Logo
Ru| En

Valtec brass wall plates for multilayer pipes

Home→ Catalog→ VALTEC→ Multilayer systems→ Wall plates

Valtec wall plates are equipped with a fastener and are used to connect a multilayer pipe to a sanitary fixture, an element of an engineering or technological system.

They are equipped with male or female thread which is corresponding to state standards.

Like other elements of Valtec multilayer pipeline, wall plates are made of high-quality brass.

Main advantages:

  • durability;
  • profitability;
  • corrosion resistance;
  • resistance to high temperatures;
  • attractive appearance.
Photo Наименование Article Цена
Photo
Photo VALTEC Wall plate, pressing connection, with female thread, d 16х1/2" [Code number: MKm.254.Y.001604]
VALTEC Wall plate, pressing connection, with female thread, d 16х1/2" [Code number: MKm.254.Y.001604]
Details 		MKm.254.Y.001604
Photo
Photo VALTEC Wall plate, pressing connection, with female thread, d 16х1/2" [Code number: MKm.354.Y.001604]
VALTEC Wall plate, pressing connection, with female thread, d 16х1/2" [Code number: MKm.354.Y.001604]
Details 		MKm.354.Y.001604
Photo
Photo VALTEC Wall plate, pressing connection, with female thread, d 20х1/2" [Code number: MKm.354.Y.002004]
VALTEC Wall plate, pressing connection, with female thread, d 20х1/2" [Code number: MKm.354.Y.002004]
Details 		MKm.354.Y.002004
Photo Draft
Photo VALTEC Wall plate, pressing connection, passing, d 16х1/2" [Code number: VTm.234.N.160416] Draft VALTEC Wall plate, pressing connection, passing, d 16х1/2" [Code number: VTm.234.N.160416]
VALTEC Wall plate, pressing connection, passing, d 16х1/2" [Code number: VTm.234.N.160416]
Details 		VTm.234.N.160416 652 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D1 D2 G Weight
mm mm mm mm   kg/pc
56 45 16 16 1/2" 0,188

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC Wall plate, pressing connection, passing, d 20х1/2" [Code number: VTm.234.N.200420] Draft VALTEC Wall plate, pressing connection, passing, d 20х1/2" [Code number: VTm.234.N.200420]
VALTEC Wall plate, pressing connection, passing, d 20х1/2" [Code number: VTm.234.N.200420]
Details 		VTm.234.N.200420 787 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D1 D2 G Weight
mm mm mm mm   kg/pc
56 45 20 20 1/2" 0,217

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC Wall plate, pressing connection, long, d 16х1/2" [Code number: VTm.254H.N.001604] Draft VALTEC Wall plate, pressing connection, long, d 16х1/2" [Code number: VTm.254H.N.001604]
VALTEC Wall plate, pressing connection, long, d 16х1/2" [Code number: VTm.254H.N.001604]
Details 		VTm.254H.N.001604 431 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D G Weight
mm mm mm   kg/pc
44 46,5 16 1/2" 0,119

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC Wall plate, pressing connection, d 16х1/2" [Code number: VTm.254.N.001604] Draft VALTEC Wall plate, pressing connection, d 16х1/2" [Code number: VTm.254.N.001604]
VALTEC Wall plate, pressing connection, d 16х1/2" [Code number: VTm.254.N.001604]
Details 		VTm.254.N.001604 355 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D G Weight
mm mm mm   kg/pc
44 40 16 1/2" 0,114

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC Wall plate, pressing connection, d 20х1/2" [Code number: VTm.254.N.002004] Draft VALTEC Wall plate, pressing connection, d 20х1/2" [Code number: VTm.254.N.002004]
VALTEC Wall plate, pressing connection, d 20х1/2" [Code number: VTm.254.N.002004]
Details 		VTm.254.N.002004 515 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D G Weight
mm mm mm   kg/pc
51 44 20 1/2" 0,141

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC Wall plate, pressing connection, d 20х3/4" [Code number: VTm.254.N.002005] Draft VALTEC Wall plate, pressing connection, d 20х3/4" [Code number: VTm.254.N.002005]
VALTEC Wall plate, pressing connection, d 20х3/4" [Code number: VTm.254.N.002005]
Details 		VTm.254.N.002005 673 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D G Weight
mm mm mm   kg/pc
56 47 20 3/4" 0,195

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC Wall plate, pressing connection, d 26х3/4" [Code number: VTm.254.N.002605] Draft VALTEC Wall plate, pressing connection, d 26х3/4" [Code number: VTm.254.N.002605]
VALTEC Wall plate, pressing connection, d 26х3/4" [Code number: VTm.254.N.002605]
Details 		VTm.254.N.002605 718 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D G Weight
mm mm mm   kg/pc
58 47 26 3/4" 0,231

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC Wall plate, pressing connection, R 16х1/2" [Code number: VTm.255.N.001604] Draft VALTEC Wall plate, pressing connection, R 16х1/2" [Code number: VTm.255.N.001604]
VALTEC Wall plate, pressing connection, R 16х1/2" [Code number: VTm.255.N.001604]
Details 		VTm.255.N.001604 374 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D1 G Weight
mm mm mm kg/pc
44 40 16 1/2" 0,108

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC Wall plate, pressing connection, passing, d 16х1/2" [Code number: VTm.334.N.160416] Draft VALTEC Wall plate, pressing connection, passing, d 16х1/2" [Code number: VTm.334.N.160416]
VALTEC Wall plate, pressing connection, passing, d 16х1/2" [Code number: VTm.334.N.160416]
Details 		VTm.334.N.160416 572 rub

Application purpose:

  • For drinking and domestic water supply systems
  • For hot water
  • For heating
  • For connecting a metal-polymer pipe to a system component with a threaded connection

Characteristics:

  • Housing made of hot stamped (GOSH) nickel-plated brass grade CW617N to EN 12165
  • EPDM O-rings
  • Female thread in accordance with GOST 6357
  • Nominal pressure 25 bar
  • Operating pressure 10 bar
  • The maximum temperature of working environment is up to +115 ºС
  • The minimum temperature of working environment is up to -30 ºС
  • Average life of 50 years

 

D1 D2 D3 А В Weight
  mm mm mm mm kg/pc
1/2" 16 16 59 45 0,243

Download data sheet: VALTEC Compression fittings VALTEC Compression fittings
Photo Draft
Photo VALTEC Wall plate, pressing connection, passing, d 20х1/2" [Code number: VTm.334.N.200420] Draft VALTEC Wall plate, pressing connection, passing, d 20х1/2" [Code number: VTm.334.N.200420]
VALTEC Wall plate, pressing connection, passing, d 20х1/2" [Code number: VTm.334.N.200420]
Details 		VTm.334.N.200420 720 rub

Application purpose:

  • For drinking and domestic water supply systems
  • For hot water
  • For heating
  • For connecting a metal-polymer pipe to a system component with a threaded connection

Characteristics:

  • Housing made of hot stamped (GOSH) nickel-plated brass grade CW617N to EN 12165
  • EPDM O-rings
  • Female thread in accordance with GOST 6357
  • Nominal pressure 25 bar
  • Operating pressure 10 bar
  • The maximum temperature of working environment is up to +115 ºС
  • The minimum temperature of working environment is up to -30 ºС
  • Average life of 50 years

 

D1 D2 D3 А В Weight
  mm mm mm mm kg/pc
1/2" 20 20 59 45 0,286

Download data sheet: VALTEC Compression fittings VALTEC Compression fittings
Photo Draft
Photo VALTEC Wall plate, pressing connection, d 16х1/2" [Code number: VTm.354.N.001604] Draft VALTEC Wall plate, pressing connection, d 16х1/2" [Code number: VTm.354.N.001604]
VALTEC Wall plate, pressing connection, d 16х1/2" [Code number: VTm.354.N.001604]
Details 		VTm.354.N.001604 301 rub

Application purpose:

  • For drinking and domestic water supply systems
  • For hot water
  • For heating
  • For connection metal-polymer pipes

Characteristics:

  • Female thread in accordance with GOST 6357
  • Housing made of hot stamped (GOSH) nickel-plated brass grade CW617N to EN 12165
  • EPDM O-rings
  • Nominal pressure 25 bar
  • Operating pressure 10 bar
  • The maximum temperature of working environment is up to +115 ºС
  • The minimum temperature of working environment is up to -30 ºС
  • Average life of 50 years

 

D1 D2 А В Weight
  mm mm mm kg/pc
1/2" 16 35 40 0,128

Download data sheet: VALTEC Compression fittings VALTEC Compression fittings
Photo Draft
Photo VALTEC Wall plate, pressing connection, d 20х1/2" [Code number: VTm.354.N.002004] Draft VALTEC Wall plate, pressing connection, d 20х1/2" [Code number: VTm.354.N.002004]
VALTEC Wall plate, pressing connection, d 20х1/2" [Code number: VTm.354.N.002004]
Details 		VTm.354.N.002004 460 rub

Application purpose:

  • For drinking and domestic water supply systems
  • For hot water
  • For heating
  • For connection metal-polymer pipes

Characteristics:

  • Female thread in accordance with GOST 6357
  • Housing made of hot stamped (GOSH) nickel-plated brass grade CW617N to EN 12165
  • EPDM O-rings
  • Nominal pressure 25 bar
  • Operating pressure 10 bar
  • The maximum temperature of working environment is up to +115 ºС
  • The minimum temperature of working environment is up to -30 ºС
  • Average life of 50 years

 

D1 D2 А В Weight
  mm mm mm kg/pc
1/2" 20 41 44 0,175

Download data sheet: VALTEC Compression fittings VALTEC Compression fittings
Photo Draft
Photo VALTEC Wall plate, pressing connection, d 20х3/4" [Code number: VTm.354.N.002005] Draft VALTEC Wall plate, pressing connection, d 20х3/4" [Code number: VTm.354.N.002005]
VALTEC Wall plate, pressing connection, d 20х3/4" [Code number: VTm.354.N.002005]
Details 		VTm.354.N.002005 586 rub

Application purpose:

  • For drinking and domestic water supply systems
  • For hot water
  • For heating
  • For connection metal-polymer pipes

Characteristics:

  • Female thread in accordance with GOST 6357
  • Housing made of hot stamped (GOSH) nickel-plated brass grade CW617N to EN 12165
  • EPDM O-rings
  • Nominal pressure 25 bar
  • Operating pressure 10 bar
  • The maximum temperature of working environment is up to +115 ºС
  • The minimum temperature of working environment is up to -30 ºС
  • Average life of 50 years

 

D1 D2 А В Weight
  mm mm mm kg/pc
3/4" 20 45 47 0,236

Download data sheet: VALTEC Compression fittings VALTEC Compression fittings
Photo Draft
Photo VALTEC Wall plate, pressing connection, R 16х1/2" [Code number: VTm.355.N.001604] Draft VALTEC Wall plate, pressing connection, R 16х1/2" [Code number: VTm.355.N.001604]
VALTEC Wall plate, pressing connection, R 16х1/2" [Code number: VTm.355.N.001604]
Details 		VTm.355.N.001604 325 rub

Application purpose:

  • For drinking and domestic water supply systems
  • For hot water
  • For heating
  • For connecting a plastic pipe based on polyethylene (PEX, PE-RT, PE) with a plumbing fixture

Characteristics:

  • Female thread in accordance with GOST 6357
  • Housing made of hot stamped (GOSH) nickel-plated brass grade CW617N to EN 12165
  • EPDM O-rings
  • Nominal pressure 25 bar
  • Operating pressure 10 bar
  • The maximum temperature of working environment is up to +115 ºС
  • The minimum temperature of working environment is up to -30 ºС
  • Average life of 50 years

 

D1 D2 А В Weight
  mm mm mm kg/pc
1/2" 16 35 40 0,120

Download data sheet: VALTEC Compression fittings VALTEC Compression fittings

See also

%d0%a3%d1%81%d0%b8%d0%bb%d0%b8%d0%b2%d0%b0%d1%8e%d1%89%d0%b8%d0%b5 %d0%a5%d0%be%d0%bc%d1%83%d1%82%d1%8b
Strengthen connecting elements
%d0%a1%d0%be%d0%b5%d0%b4%d0%b8%d0%bd%d0%b8%d1%82%d0%b5%d0%bb%d1%8c%d0%bd%d1%8b%d0%b5 %d0%a5%d0%be%d0%bc%d1%83%d1%82%d1%8b
Connecting elements
%d0%9f%d0%b5%d1%80%d0%b5%d1%85%d0%be%d0%b4%d1%8b %d0%bd%d0%b0 %d0%bf%d0%bb%d0%b0%d1%81%d1%82%d0%b8%d0%ba
PP-adapter Konfix etc.

© Inrusstrade.ru 1999-2021. "Inrusstrade" Ltd. Copying and quoting is prohibited