Axial fittings | Inrusstrade

VALTEC axial fittings are used to create one-piece connections in drinking water supply systems, heating and hot water supply systems, domestic water supply, as well as on process pipelines that transport wastewater that is not aggressive to the materials of pipes and axial fittings.

They are suitable for pipes made of cross-linked polyethylene PEX and PE of increased heat resistance PERT series S3.2 (SDR 7.4) (corresponding to GOST 32415-2013).

Main advantages of VALTEC axial fittings:

the diameter of the connected pipelines is not narrowed;
high reliability and simplicity;
tightness;
quick and easy installation;
pipe material is a sealant;
monolithic is possible;
the joint can be pressurized immediately after installation.

Working pressure: 16 bar.

Maximum operating temperature: +95 °С.

Average service life: 50 years.

Photo Name Article Price

VALTEC Steel bracket for fixing fittings VTm.481.P, 50 mm [Code number: VT.481.KS.01]

Details

VT.481.KS.01

87 rub

VALTEC Sleeve chrome-plated (sliding fitting), d 16*2,2 [Code number: VTm.400.BC.001622]

Details

VTm.400.BC.001622

94 rub

VALTEC Sleeve chrome-plated (sliding fitting), d 20*2,8 [Code number: VTm.400.BC.002028]

Details

VTm.400.BC.002028

122 rub

VALTEC Sleeve (push-in fitting), d 16*2,2 [Code number: VTm.400.BG.001622]

Details

VTm.400.BG.001622

73 rub

VALTEC Sleeve (push-in fitting), d 20(2,8) [Code number: VTm.400.BG.002028]

Details

VTm.400.BG.002028

83 rub

VALTEC Sleeve (push-in fitting), d 25(3,5) [Code number: VTm.400.BG.002535]

Details

VTm.400.BG.002535

132 rub

VALTEC Slip collar, d 16(2,2) [Code number: VTm.400.G.001622]

Details

VTm.400.G.001622

43 rub

VALTEC Sliding connector with male thread, d 16*2,2, d1 1/2" [Code number: VTm.401.BG.001604]

Details

VTm.401.BG.001604

161 rub

Application purpose:

For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
For heating
For cold (including drinking) and hot water supply
For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

The sleeve is universal, installation is carried out by both manual and electric tools;
The resulting connection is non-separable and does not require maintenance;
The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
The open and hidden laying of the pipeline is possible;
The pipe ends are expanded before installation, so that the diameter is not tinned;
The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
Thread type - male;
Nominal pressure: up to 16 bar;
Working temperature: up to +95 ºС.

Average life: 50 years.

G	А	В	C	D
	mm	mm	mm	mm
1/2"	42	12	15,8	10

Documentation

Download data sheet: VALTEC Sliding connector VTm.401.BG.001604

VALTEC Sliding connector with male thread, d 20(2,8), d1 1/2" [Code number: VTm.401.BG.002004]

Details

VTm.401.BG.002004

221 rub

Application purpose:

For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
For heating
For cold (including drinking) and hot water supply
For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

The sleeve is universal, installation is carried out by both manual and electric tools;
The resulting connection is non-separable and does not require maintenance;
The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
The open and hidden laying of the pipeline is possible;
The pipe ends are expanded before installation, so that the diameter is not tinned;
The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
Thread type - male;
Nominal pressure: up to 16 bar;
Working temperature: up to +95 ºС.

Average life: 50 years.

G	А	В	C	D
	mm	mm	mm	mm
1/2"	48	12	20	12,6

Documentation

Download data sheet: VALTEC Sliding connector VTm.401.BG.002004

VALTEC Sliding connector with male thread, d 20(2,8), d1 3/4" [Code number: VTm.401.BG.002005]

Details

VTm.401.BG.002005

221 rub

Application purpose:

For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
For heating
For cold (including drinking) and hot water supply
For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

The sleeve is universal, installation is carried out by both manual and electric tools;
The resulting connection is non-separable and does not require maintenance;
The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
The open and hidden laying of the pipeline is possible;
The pipe ends are expanded before installation, so that the diameter is not tinned;
The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
Thread type - male;
Nominal pressure: up to 16 bar;
Working temperature: up to +95 ºС.

Average life: 50 years.

G	А	В	C	D
	mm	mm	mm	mm
3/4"	48	14	20	12,6

Documentation

Download data sheet: VALTEC Sliding connector VTm.401.BG.002005

VALTEC Sliding connector with male thread, d 25(3,5), d1 1/2" [Code number: VTm.401.BG.002504]

Details

VTm.401.BG.002504

425 rub

Application purpose:

For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
For heating
For cold (including drinking) and hot water supply
For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

The sleeve is universal, installation is carried out by both manual and electric tools;
The resulting connection is non-separable and does not require maintenance;
The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
The open and hidden laying of the pipeline is possible;
The pipe ends are expanded before installation, so that the diameter is not tinned;
The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
Thread type - male;
Nominal pressure: up to 16 bar;
Working temperature: up to +95 ºС.

Average life: 50 years.

G	А	В	C	D
	mm	mm	mm	mm
1/2"	55	12	27	15,4

Documentation

Download data sheet: VALTEC Sliding connector VTm.401.BG.002504

VALTEC Sliding connector with male thread, d 25(3,5), d1 3/4" [Code number: VTm.401.BG.002505]

Details

VTm.401.BG.002505

320 rub

Application purpose:

For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
For heating
For cold (including drinking) and hot water supply
For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

The sleeve is universal, installation is carried out by both manual and electric tools;
The resulting connection is non-separable and does not require maintenance;
The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
The open and hidden laying of the pipeline is possible;
The pipe ends are expanded before installation, so that the diameter is not tinned;
The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
Thread type - male;
Nominal pressure: up to 16 bar;
Working temperature: up to +95 ºС.

Average life: 50 years.

G	А	В	C	D
	mm	mm	mm	mm
3/4"	60	15,5	27	15,4

Documentation

Download data sheet: VALTEC Sliding connector VTm.401.BG.002505

VALTEC Sliding connector with male thread, d 25(3,5), d1 1" [Code number: VTm.401.BG.002506]

Details

VTm.401.BG.002506

450 rub

Application purpose:

For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
For heating
For cold (including drinking) and hot water supply
For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

The sleeve is universal, installation is carried out by both manual and electric tools;
The resulting connection is non-separable and does not require maintenance;
The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
The open and hidden laying of the pipeline is possible;
The pipe ends are expanded before installation, so that the diameter is not tinned;
The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
Thread type - male;
Nominal pressure: up to 16 bar;
Working temperature: up to +95 ºС.

Average life: 50 years.

G	А	В	C	D
	mm	mm	mm	mm
1"	60	16	27	15,4

Documentation

Download data sheet: VALTEC Sliding connector VTm.401.BG.002506

VALTEC Sliding connector with transition to male thread, d 32(4,4), d1 3/4" [Code number VTm.401.BG.003205]

Details

VTm.401.BG.003205

327 rub

VALTEC Sliding connector with transition to male thread, d 32(4,4), d1 1" [Code number VTm.401.BG.003206]

Details

VTm.401.BG.003206

387 rub

VALTEC Slip fitting with passage to external thread, d 16(2,2), d1 1/2" [Code number: VTm.401.G.001604]

Details

VTm.401.G.001604

83 rub

Application purpose:

For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
For heating
For cold (including drinking) and hot water supply
For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

The sleeve is lightweight, installation is carried out by hand tools;
The resulting connection is non-separable and does not require maintenance;
The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
The open and hidden laying of the pipeline is possible;
The pipe ends are expanded before installation, so that the diameter is not tinned;
The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
Thread type - male;
Nominal pressure: up to 16 bar;
Working temperature: up to +95 ºС.

Average life: 50 years.

G	А	В	C	D
	mm	mm	mm	mm
1/2"	43	12	16	9,8

Documentation

Download data sheet: VALTEC Sliding connector VTm.401.G.001604

VALTEC Sliding connector with female thread, d 16*2,2, d1 1/2" [Code number: VTm.402.BG.001604]

Details

VTm.402.BG.001604

188 rub

Application purpose:

For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
For heating
For cold (including drinking) and hot water supply
For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

The sleeve is universal, installation is carried out by both manual and electric tools;
The resulting connection is non-separable and does not require maintenance;
The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
The open and hidden laying of the pipeline is possible;
The pipe ends are expanded before installation, so that the diameter is not tinned;
The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
Thread type - female;
Nominal pressure: up to 16 bar;
Working temperature: up to +95 ºС.

Average life: 50 years.

G	А	В	C	D
	mm	mm	mm	mm
1/2"	43	12	15,8	10

Documentation

Download data sheet: VALTEC Sliding connector VTm.402.BG.001604

VALTEC Sliding connector with female thread, d 20(2,8), d1 1/2" [Code number: VTm.402.BG.002004]

Details

VTm.402.BG.002004

194 rub

Application purpose:

For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
For heating
For cold (including drinking) and hot water supply
For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

The sleeve is universal, installation is carried out by both manual and electric tools;
The resulting connection is non-separable and does not require maintenance;
The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
The open and hidden laying of the pipeline is possible;
The pipe ends are expanded before installation, so that the diameter is not tinned;
The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
Thread type - female;
Nominal pressure: up to 16 bar;
Working temperature: up to +95 ºС.

Average life: 50 years.

G	А	В	C	D
	mm	mm	mm	mm
1/2"	48	12	20	12,6

Documentation

Download data sheet: VALTEC Sliding connector VTm.402.BG.002004

VALTEC Sliding connector with female thread, d 20(2,8), d1 3/4" [Code number: VTm.402.BG.002005]

Details

VTm.402.BG.002005

248 rub

Application purpose:

For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
For heating
For cold (including drinking) and hot water supply
For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

The sleeve is universal, installation is carried out by both manual and electric tools;
The resulting connection is non-separable and does not require maintenance;
The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
The open and hidden laying of the pipeline is possible;
The pipe ends are expanded before installation, so that the diameter is not tinned;
The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
Thread type - female;
Nominal pressure: up to 16 bar;
Working temperature: up to +95 ºС.

Average life: 50 years.

G	А	В	C	D
	mm	mm	mm	mm
3/4"	53	16	20	12,6

Documentation

Download data sheet: VALTEC Sliding connector VTm.402.BG.002005

VALTEC Sliding connector with female thread, d 25(3,5), d1 3/4" [Code number: VTm.402.BG.002505]

Details

VTm.402.BG.002505

342 rub

Application purpose:

For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
For heating
For cold (including drinking) and hot water supply
For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

The sleeve is universal, installation is carried out by both manual and electric tools;
The resulting connection is non-separable and does not require maintenance;
The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
The open and hidden laying of the pipeline is possible;
The pipe ends are expanded before installation, so that the diameter is not tinned;
The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
Thread type - female;
Nominal pressure: up to 16 bar;
Working temperature: up to +95 ºС.

Average life: 50 years.