Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

VALTEC Axial fittings

Home→ Catalog→ VALTEC→ Multilayer systems→ Axial fittings

VALTEC axial fittings are used to create one-piece connections in drinking water supply systems, heating and hot water supply systems, domestic water supply, as well as on process pipelines that transport wastewater that is not aggressive to the materials of pipes and axial fittings.

They are suitable for pipes made of cross-linked polyethylene PEX and PE of increased heat resistance PERT series S3.2 (SDR 7.4) (corresponding to GOST 32415-2013).

Main advantages of VALTEC axial fittings:

  • the diameter of the connected pipelines is not narrowed;
  • high reliability and simplicity;
  • tightness;
  • quick and easy installation;
  • pipe material is a sealant;
  • monolithic is possible;
  • the joint can be pressurized immediately after installation.

Working pressure: 16 bar.

Maximum operating temperature: +95 °С.

Average service life: 50 years.

Photo Наименование Article Цена
Photo Draft
Photo VALTEC Sliding reducer with male thread, d - 20*2,8, d1 - 1/2" [Code number: VTm.401.G.002004] Draft VALTEC Sliding reducer with male thread, d - 20*2,8, d1 - 1/2" [Code number: VTm.401.G.002004]
VALTEC Sliding reducer with male thread, d - 20*2,8, d1 - 1/2" [Code number: VTm.401.G.002004]
Details 		VTm.401.G.002004 172 rub
Photo Draft
Photo VALTEC Sliding connector, d - 20*2,8, d1 - 3/4", with male thread [Code number: VTm.401.G.002005] Draft VALTEC Sliding connector, d - 20*2,8, d1 - 3/4", with male thread [Code number: VTm.401.G.002005]
VALTEC Sliding connector, d - 20*2,8, d1 - 3/4", with male thread [Code number: VTm.401.G.002005]
Details 		VTm.401.G.002005 236 rub
Photo Draft
Photo VALTEC Sliding connector with male thread, d - 25*3,5, d1 - 1/2" [Code number: VTm.401.G.002504] Draft VALTEC Sliding connector with male thread, d - 25*3,5, d1 - 1/2" [Code number: VTm.401.G.002504]
VALTEC Sliding connector with male thread, d - 25*3,5, d1 - 1/2" [Code number: VTm.401.G.002504]
Details 		VTm.401.G.002504 249 rub
Photo Draft
Photo VALTEC Sliding connector with male thread, d - 25*3,5, d1 - 3/4" [Code number: VTm.401.G.002505] Draft VALTEC Sliding connector with male thread, d - 25*3,5, d1 - 3/4" [Code number: VTm.401.G.002505]
VALTEC Sliding connector with male thread, d - 25*3,5, d1 - 3/4" [Code number: VTm.401.G.002505]
Details 		VTm.401.G.002505 313 rub
Photo Draft
Photo VALTEC Sliding connector with male thread, d - 25*3,5, d1 - 1" [Code number: VTm.401.G.002506] Draft VALTEC Sliding connector with male thread, d - 25*3,5, d1 - 1" [Code number: VTm.401.G.002506]
VALTEC Sliding connector with male thread, d - 25*3,5, d1 - 1" [Code number: VTm.401.G.002506]
Details 		VTm.401.G.002506 402 rub
Photo Draft
Photo VALTEC Sliding connector, d - 32*4,4, d1 - 3/4", with male thread [Code number: VTm.401.G.003205] Draft VALTEC Sliding connector, d - 32*4,4, d1 - 3/4", with male thread [Code number: VTm.401.G.003205]
VALTEC Sliding connector, d - 32*4,4, d1 - 3/4", with male thread [Code number: VTm.401.G.003205]
Details 		VTm.401.G.003205 393 rub
Photo Draft
Photo VALTEC Sliding connector, d - 32*4,4, d1 - 1", with male thread [Code number: VTm.401.G.003206] Draft VALTEC Sliding connector, d - 32*4,4, d1 - 1", with male thread [Code number: VTm.401.G.003206]
VALTEC Sliding connector, d - 32*4,4, d1 - 1", with male thread [Code number: VTm.401.G.003206]
Details 		VTm.401.G.003206 495 rub
Photo Draft
Photo VALTEC Sliding connector with female thread, d - 16*2,2, d1 - 1/2" [Code number: VTm.402.BG.001604] Draft VALTEC Sliding connector with female thread, d - 16*2,2, d1 - 1/2" [Code number: VTm.402.BG.001604]
VALTEC Sliding connector with female thread, d - 16*2,2, d1 - 1/2" [Code number: VTm.402.BG.001604]
Details 		VTm.402.BG.001604 237 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type - female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

G А В C D
  mm mm mm mm
1/2" 43 12 15,8 10

Documentation

Download data sheet: VALTEC Sliding connector VTm.402.BG.001604
Photo Draft
Photo VALTEC Sliding connector, d - 20*2,8, d1 - 1/2", with female thread [Code number: VTm.402.BG.002004] Draft VALTEC Sliding connector, d - 20*2,8, d1 - 1/2", with female thread [Code number: VTm.402.BG.002004]
VALTEC Sliding connector, d - 20*2,8, d1 - 1/2", with female thread [Code number: VTm.402.BG.002004]
Details 		VTm.402.BG.002004 291 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type - female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

G А В C D
  mm mm mm mm
1/2" 48 12 20 12,6

Documentation

Download data sheet: VALTEC Sliding connector VTm.402.BG.002004
Photo Draft
Photo VALTEC Sliding connector with female thread, d - 20(2,8), d1 - 3/4" [Code number: VTm.402.BG.002005] Draft VALTEC Sliding connector with female thread, d - 20(2,8), d1 - 3/4" [Code number: VTm.402.BG.002005]
VALTEC Sliding connector with female thread, d - 20(2,8), d1 - 3/4" [Code number: VTm.402.BG.002005]
Details 		VTm.402.BG.002005 275 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type - female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

G А В C D
  mm mm mm mm
3/4" 53 16 20 12,6

Documentation

Download data sheet: VALTEC Sliding connector VTm.402.BG.002005
Photo Draft
Photo VALTEC Sliding connector with female thread, d - 25*3,5, d1 - 1/2" [Code number: VTm.402.BG.002504] Draft VALTEC Sliding connector with female thread, d - 25*3,5, d1 - 1/2" [Code number: VTm.402.BG.002504]
VALTEC Sliding connector with female thread, d - 25*3,5, d1 - 1/2" [Code number: VTm.402.BG.002504]
Details 		VTm.402.BG.002504 254 rub
Photo Draft
Photo VALTEC Sliding connector with female thread, d - 25(3,5), d1 - 3/4" [Code number: VTm.402.BG.002505] Draft VALTEC Sliding connector with female thread, d - 25(3,5), d1 - 3/4" [Code number: VTm.402.BG.002505]
VALTEC Sliding connector with female thread, d - 25(3,5), d1 - 3/4" [Code number: VTm.402.BG.002505]
Details 		VTm.402.BG.002505 460 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type - female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

G А В C D
  mm mm mm mm
3/4" 60 16 27 15,4

Documentation

Download data sheet: VALTEC Sliding connector VTm.402.BG.002505
Photo Draft
Photo VALTEC Sliding connector with female thread, d - 25(3,5), d1 - 1" [Code number: VTm.402.BG.002506] Draft VALTEC Sliding connector with female thread, d - 25(3,5), d1 - 1" [Code number: VTm.402.BG.002506]
VALTEC Sliding connector with female thread, d - 25(3,5), d1 - 1" [Code number: VTm.402.BG.002506]
Details 		VTm.402.BG.002506 579 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type - female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

G А В C D
  mm mm mm mm
1" 65 20 27 15,4

Documentation

Download data sheet: VALTEC Sliding connector VTm.402.BG.002506
Photo Draft
Photo VALTEC Sliding connector with transition to female thread, d - 32(4,4), d1 - 3/4" [Code number VTm.402.BG.003205] Draft VALTEC Sliding connector with transition to female thread, d - 32(4,4), d1 - 3/4" [Code number VTm.402.BG.003205]
VALTEC Sliding connector with transition to female thread, d - 32(4,4), d1 - 3/4" [Code number VTm.402.BG.003205]
Details 		VTm.402.BG.003205 503 rub
Photo Draft
Photo VALTEC Sliding connector with transition to female thread, d - 32(4,4), d1 - 1" [Code number VTm.402.BG.003206] Draft VALTEC Sliding connector with transition to female thread, d - 32(4,4), d1 - 1" [Code number VTm.402.BG.003206]
VALTEC Sliding connector with transition to female thread, d - 32(4,4), d1 - 1" [Code number VTm.402.BG.003206]
Details 		VTm.402.BG.003206 599 rub
Photo Draft
Photo VALTEC Slip fitting withy passage to internal thread, d - 16(2,2), d1 - 1/2" [Code number: VTm.402.G.001604] Draft VALTEC Slip fitting withy passage to internal thread, d - 16(2,2), d1 - 1/2" [Code number: VTm.402.G.001604]
VALTEC Slip fitting withy passage to internal thread, d - 16(2,2), d1 - 1/2" [Code number: VTm.402.G.001604]
Details 		VTm.402.G.001604 164 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is lightweight, installation is carried out by hand tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type - female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

G А В C D
  mm mm mm mm
1/2" 41 12 16 9,8

Documentation

Download data sheet: VALTEC Sliding connector VTm.402.G.001604
Photo Draft
Photo VALTEC Sliding reducer with female thread, d - 16*2,2, d1 - 3/4" [Code number: VTm.402.G.001605] Draft VALTEC Sliding reducer with female thread, d - 16*2,2, d1 - 3/4" [Code number: VTm.402.G.001605]
VALTEC Sliding reducer with female thread, d - 16*2,2, d1 - 3/4" [Code number: VTm.402.G.001605]
Details 		VTm.402.G.001605 239 rub
Photo Draft
Photo VALTEC Sliding reducer with female thread, d - 20*2,8, d1 - 1/2" [Code number: VTm.402.G.002004] Draft VALTEC Sliding reducer with female thread, d - 20*2,8, d1 - 1/2" [Code number: VTm.402.G.002004]
VALTEC Sliding reducer with female thread, d - 20*2,8, d1 - 1/2" [Code number: VTm.402.G.002004]
Details 		VTm.402.G.002004 206 rub
Photo Draft
Photo VALTEC Sliding connector, d - 20*2,8, d1 - 3/4", with female thread [Code number: VTm.402.G.002005] Draft VALTEC Sliding connector, d - 20*2,8, d1 - 3/4", with female thread [Code number: VTm.402.G.002005]
VALTEC Sliding connector, d - 20*2,8, d1 - 3/4", with female thread [Code number: VTm.402.G.002005]
Details 		VTm.402.G.002005 294 rub
Photo Draft
Photo VALTEC Sliding connector with female thread, d - 25*3,5, d1 - 3/4" [Code number: VTm.402.G.002505] Draft VALTEC Sliding connector with female thread, d - 25*3,5, d1 - 3/4" [Code number: VTm.402.G.002505]
VALTEC Sliding connector with female thread, d - 25*3,5, d1 - 3/4" [Code number: VTm.402.G.002505]
Details 		VTm.402.G.002505 326 rub

See also

Connecting elements
Strengthen connecting elements
PP-adapter Konfix etc.
© Inrusstrade.ru 1999-2025. "Inrusstrade" Ltd. Copying and quoting is prohibited