Logo
Ru| En

VALTEC Axial fittings

Home→ Catalog→ VALTEC→ Multilayer systems→ Axial fittings

VALTEC axial fittings are used to create one-piece connections in drinking water supply systems, heating and hot water supply systems, domestic water supply, as well as on process pipelines that transport wastewater that is not aggressive to the materials of pipes and axial fittings.

They are suitable for pipes made of cross-linked polyethylene PEX and PE of increased heat resistance PERT series S3.2 (SDR 7.4) (corresponding to GOST 32415-2013).

Main advantages of VALTEC axial fittings:

  • the diameter of the connected pipelines is not narrowed;
  • high reliability and simplicity;
  • tightness;
  • quick and easy installation;
  • pipe material is a sealant;
  • monolithic is possible;
  • the joint can be pressurized immediately after installation.

Working pressure: 16 bar.

Maximum operating temperature: +95 °С.

Average service life: 50 years.

Photo Name Article Price
Photo Draft
Photo VALTEC Sliding connector, d - 20*2,8, d1 - 1/2", with union nut [Code number: VTm.422.G.002004] Draft VALTEC Sliding connector, d - 20*2,8, d1 - 1/2", with union nut [Code number: VTm.422.G.002004]
VALTEC Sliding connector, d - 20*2,8, d1 - 1/2", with union nut [Code number: VTm.422.G.002004]
Details 		VTm.422.G.002004 208 rub
Photo Draft
Photo VALTEC Sliding connector, d - 20*2,8, d1 - 3/4", with union nut [Code number: VTm.422.G.002005] Draft VALTEC Sliding connector, d - 20*2,8, d1 - 3/4", with union nut [Code number: VTm.422.G.002005]
VALTEC Sliding connector, d - 20*2,8, d1 - 3/4", with union nut [Code number: VTm.422.G.002005]
Details 		VTm.422.G.002005 261 rub
Photo Draft
Photo VALTEC Sliding connector, d - 25*3,5, d1 - 3/4", with union nut [Code number: VTm.422.G.002505] Draft VALTEC Sliding connector, d - 25*3,5, d1 - 3/4", with union nut [Code number: VTm.422.G.002505]
VALTEC Sliding connector, d - 25*3,5, d1 - 3/4", with union nut [Code number: VTm.422.G.002505]
Details 		VTm.422.G.002505 316 rub
Photo Draft
Photo VALTEC Sliding connector, d - 3/4"(EK), d1 - 16*2,2, with union nut, под "евроконус" [Code number: VTm.422.GE.001605] Draft VALTEC Sliding connector, d - 3/4"(EK), d1 - 16*2,2, with union nut, под "евроконус" [Code number: VTm.422.GE.001605]
VALTEC Sliding connector, d - 3/4"(EK), d1 - 16*2,2, with union nut, под "евроконус" [Code number: VTm.422.GE.001605]
Details 		VTm.422.GE.001605 219 rub
Photo Draft
Photo VALTEC Sliding connector, d - 3/4"(Eurokonus), d1 - 20*2,8, with union nut, под "евроконус" [Code number: VTm.422.GE.002005] Draft VALTEC Sliding connector, d - 3/4"(Eurokonus), d1 - 20*2,8, with union nut, под "евроконус" [Code number: VTm.422.GE.002005]
VALTEC Sliding connector, d - 3/4"(Eurokonus), d1 - 20*2,8, with union nut, под "евроконус" [Code number: VTm.422.GE.002005]
Details 		VTm.422.GE.002005 291 rub
Photo Draft
Photo VALTEC Sliding T-piece, d - 16*2,2, d1 - 16*2,2, d2 - 16*2,2 [Code number: VTm.431.BG.161616] Draft VALTEC Sliding T-piece, d - 16*2,2, d1 - 16*2,2, d2 - 16*2,2 [Code number: VTm.431.BG.161616]
VALTEC Sliding T-piece, d - 16*2,2, d1 - 16*2,2, d2 - 16*2,2 [Code number: VTm.431.BG.161616]
Details 		VTm.431.BG.161616 443 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type: female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А В D1 L1 D2 L2 D3 L3
mm mm mm mm mm mm mm mm mm
70 39 10 15,8 10 15,8 10 15,8

Documentation

Download data sheet: VTm.431.BG.161616 VALTEC Sliding T-piece VTm.431.BG.161616
Photo Draft
Photo VALTEC Sliding T-piece reducing, d - 16(2,2, d1 - 20(2,8), d2 - 16(2,2) [Code number: VTm.431.BG.162016] Draft VALTEC Sliding T-piece reducing, d - 16(2,2, d1 - 20(2,8), d2 - 16(2,2) [Code number: VTm.431.BG.162016]
VALTEC Sliding T-piece reducing, d - 16(2,2, d1 - 20(2,8), d2 - 16(2,2) [Code number: VTm.431.BG.162016]
Details 		VTm.431.BG.162016 532 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type: female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А В D1 L1 D2 L2 D3 L3
mm mm mm mm mm mm mm mm
76 42 10 15,8 12,6 20 10 15,8

Documentation

Download data sheet: VTm.431.BG.162016 VALTEC Sliding T-piece VTm.431.BG.162016
Photo Draft
Photo VALTEC Sliding T-piece reducing, d - 20(2,8), d1 - 16(2,2), d2 - 16(2,2) [Code number: VTm.431.BG.201616] Draft VALTEC Sliding T-piece reducing, d - 20(2,8), d1 - 16(2,2), d2 - 16(2,2) [Code number: VTm.431.BG.201616]
VALTEC Sliding T-piece reducing, d - 20(2,8), d1 - 16(2,2), d2 - 16(2,2) [Code number: VTm.431.BG.201616]
Details 		VTm.431.BG.201616 579 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type: female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А В D1 L1 D2 L2 D3 L3
mm mm mm mm mm mm mm mm mm
70 40 12,6 20 10 15,8 10 15,8

Documentation

Download data sheet: VTm.431.BG.201616 VALTEC Sliding T-piece VTm.431.BG.201616
Photo Draft
Photo VALTEC Sliding T-piece reducing, d - 20(2,8), d1 - 16(2,2), d2 - 20(2,8) [Code number: VTm.431.BG.201620] Draft VALTEC Sliding T-piece reducing, d - 20(2,8), d1 - 16(2,2), d2 - 20(2,8) [Code number: VTm.431.BG.201620]
VALTEC Sliding T-piece reducing, d - 20(2,8), d1 - 16(2,2), d2 - 20(2,8) [Code number: VTm.431.BG.201620]
Details 		VTm.431.BG.201620 578 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type: female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А В D1 L1 D2 L2 D3 L3
mm mm mm mm mm mm mm mm
78 38 12,6 20 10 15,8 12,6 20

Documentation

Download data sheet: VTm.431.BG.201620 VALTEC Sliding T-piece VTm.431.BG.201620
Photo Draft
Photo VALTEC Sliding T-piece reducing, d - 20(2,8), d1 - 20(2,8), d2 - 16(2,2) [Code number: VTm.431.BG.202016] Draft VALTEC Sliding T-piece reducing, d - 20(2,8), d1 - 20(2,8), d2 - 16(2,2) [Code number: VTm.431.BG.202016]
VALTEC Sliding T-piece reducing, d - 20(2,8), d1 - 20(2,8), d2 - 16(2,2) [Code number: VTm.431.BG.202016]
Details 		VTm.431.BG.202016 579 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type: female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А В D1 L1 D2 L2 D3 L3
mm mm mm mm mm mm mm mm mm
76 40 12,6 22,5 12,6 22,5 9,8 21

Documentation

Download data sheet: VTm.431.BG.202016 VALTEC Sliding T-piece VTm.431.BG.202016
Photo Draft
Photo VALTEC Sliding T-piece, d - 20(2,8), d1 - 20(2,8), d2 - 20(2,8) [Code number: VTm.431.BG.202020] Draft VALTEC Sliding T-piece, d - 20(2,8), d1 - 20(2,8), d2 - 20(2,8) [Code number: VTm.431.BG.202020]
VALTEC Sliding T-piece, d - 20(2,8), d1 - 20(2,8), d2 - 20(2,8) [Code number: VTm.431.BG.202020]
Details 		VTm.431.BG.202020 575 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type: female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А В D1 L1 D2 L2 D3 L3
mm mm mm mm mm mm mm mm mm
77 42 12,6 20 12,6 20 12,6 20

Documentation

Download data sheet: VTm.431.BG.202020 VALTEC Sliding T-piece VTm.431.BG.202020
Photo
Photo VALTEC Sliding T-piece, d - 20*2,8, d1 - 25*3,5, d2 - 16*2,2 [Code number: VTm.431.BG.202516]
VALTEC Sliding T-piece, d - 20*2,8, d1 - 25*3,5, d2 - 16*2,2 [Code number: VTm.431.BG.202516]
Details 		VTm.431.BG.202516 491 rub
Photo Draft
Photo VALTEC Sliding T-piece reducing, d - 20(2,8), d1 - 25(3,5), d2 - 20(2,8) [Code number: VTm.431.BG.202520] Draft VALTEC Sliding T-piece reducing, d - 20(2,8), d1 - 25(3,5), d2 - 20(2,8) [Code number: VTm.431.BG.202520]
VALTEC Sliding T-piece reducing, d - 20(2,8), d1 - 25(3,5), d2 - 20(2,8) [Code number: VTm.431.BG.202520]
Details 		VTm.431.BG.202520 794 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type: female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А В D1 L1 D2 L2 D3 L3
mm mm mm mm mm mm mm mm mm
93 51 12,6 20 15,4 27 12,6 20

Documentation

Download data sheet: VTm.431.BG.202520 VALTEC Sliding T-piece VTm.431.BG.202520
Photo Draft
Photo VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 16(2,2), d2 - 16(2,2) [Code number: VTm.431.BG.251616] Draft VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 16(2,2), d2 - 16(2,2) [Code number: VTm.431.BG.251616]
VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 16(2,2), d2 - 16(2,2) [Code number: VTm.431.BG.251616]
Details 		VTm.431.BG.251616 517 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type: female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А В D1 L1 D2 L2 D3 L3
mm mm mm mm mm mm mm mm mm
88 40 15,4 27 10 15,8 10 15,8

Documentation

Download data sheet: VTm.431.BG.251616 VALTEC Sliding T-piece VTm.431.BG.251616
Photo Draft
Photo VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 16(2,2), d2 - 20(2,8) [Code number: VTm.431.BG.251620] Draft VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 16(2,2), d2 - 20(2,8) [Code number: VTm.431.BG.251620]
VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 16(2,2), d2 - 20(2,8) [Code number: VTm.431.BG.251620]
Details 		VTm.431.BG.251620 723 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type: female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А В D1 L1 D2 L2 D3 L3
mm mm mm mm mm mm mm mm mm
91 40 15,4 27 10 15,8 12,6 20

Documentation

Download data sheet: VTm.431.BG.251620 VALTEC Sliding T-piece VTm.431.BG.251620
Photo Draft
Photo VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 16(2,2), d2 - 25(3,5) [Code number: VTm.431.BG.251625] Draft VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 16(2,2), d2 - 25(3,5) [Code number: VTm.431.BG.251625]
VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 16(2,2), d2 - 25(3,5) [Code number: VTm.431.BG.251625]
Details 		VTm.431.BG.251625 697 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type: female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А В D1 L1 D2 L2 D3 L3
mm mm mm mm mm mm mm mm mm
107 40 15,4 27 10 15,8 15,4 27

Documentation

Download data sheet: VTm.431.BG.251625 VALTEC Sliding T-piece VTm.431.BG.251625
Photo Draft
Photo VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 20(2,8), d2 - 16(2,2) [Code number: VTm.431.BG.252016] Draft VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 20(2,8), d2 - 16(2,2) [Code number: VTm.431.BG.252016]
VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 20(2,8), d2 - 16(2,2) [Code number: VTm.431.BG.252016]
Details 		VTm.431.BG.252016 653 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type: female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А В D1 L1 D2 L2 D3 L3
mm mm mm mm mm mm mm mm mm
90 47 15,4 27 12,6 20 10 15,8

Documentation

Download data sheet: VTm.431.BG.252016 VALTEC Sliding T-piece VTm.431.BG.252016
Photo Draft
Photo VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 20(2,8), d2 - 20(2,8) [Code number: VTm.431.BG.252020] Draft VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 20(2,8), d2 - 20(2,8) [Code number: VTm.431.BG.252020]
VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 20(2,8), d2 - 20(2,8) [Code number: VTm.431.BG.252020]
Details 		VTm.431.BG.252020 656 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type: female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А В D1 L1 D2 L2 D3 L3
mm mm mm mm mm mm mm mm mm
96 47 15,4 27 12,6 20 12,6 20

Documentation

Download data sheet: VTm.431.BG.252020 VALTEC Sliding T-piece VTm.431.BG.252020
Photo Draft
Photo VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 20(2,8), d2 - 25(3,5) [Code number: VTm.431.BG.252025] Draft VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 20(2,8), d2 - 25(3,5) [Code number: VTm.431.BG.252025]
VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 20(2,8), d2 - 25(3,5) [Code number: VTm.431.BG.252025]
Details 		VTm.431.BG.252025 854 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type: female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А В D1 L1 D2 L2 D3 L3
mm mm mm mm mm mm mm mm mm
107 47 15,4 27 12,6 20 15,4 27

Documentation

Download data sheet: VTm.431.BG.252025 VALTEC Sliding T-piece VTm.431.BG.252025
Photo Draft
Photo VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 25(3,5), d2 - 16(2,2) [Code number: VTm.431.BG.252516] Draft VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 25(3,5), d2 - 16(2,2) [Code number: VTm.431.BG.252516]
VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 25(3,5), d2 - 16(2,2) [Code number: VTm.431.BG.252516]
Details 		VTm.431.BG.252516 636 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type: female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А В D1 L1 D2 L2 D3 L3
mm mm mm mm mm mm mm mm mm
96 54 15,4 27 15,4 27 10 15,8

Documentation

Download data sheet: VTm.431.BG.252516 VALTEC Sliding T-piece VTm.431.BG.252516

See also

%d0%a1%d0%be%d0%b5%d0%b4%d0%b8%d0%bd%d0%b8%d1%82%d0%b5%d0%bb%d1%8c%d0%bd%d1%8b%d0%b5 %d0%a5%d0%be%d0%bc%d1%83%d1%82%d1%8b
Connecting elements
%d0%9f%d0%b5%d1%80%d0%b5%d1%85%d0%be%d0%b4%d1%8b %d0%bd%d0%b0 %d0%bf%d0%bb%d0%b0%d1%81%d1%82%d0%b8%d0%ba
PP-adapter Konfix etc.
%d0%a3%d1%81%d0%b8%d0%bb%d0%b8%d0%b2%d0%b0%d1%8e%d1%89%d0%b8%d0%b5 %d0%a5%d0%be%d0%bc%d1%83%d1%82%d1%8b
Strengthen connecting elements

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited