Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

VALTEC Axial fittings

Home→ Catalog→ VALTEC→ Multilayer systems→ Axial fittings

VALTEC axial fittings are used to create one-piece connections in drinking water supply systems, heating and hot water supply systems, domestic water supply, as well as on process pipelines that transport wastewater that is not aggressive to the materials of pipes and axial fittings.

They are suitable for pipes made of cross-linked polyethylene PEX and PE of increased heat resistance PERT series S3.2 (SDR 7.4) (corresponding to GOST 32415-2013).

Main advantages of VALTEC axial fittings:

  • the diameter of the connected pipelines is not narrowed;
  • high reliability and simplicity;
  • tightness;
  • quick and easy installation;
  • pipe material is a sealant;
  • monolithic is possible;
  • the joint can be pressurized immediately after installation.

Working pressure: 16 bar.

Maximum operating temperature: +95 °С.

Average service life: 50 years.

Photo Наименование Article Цена
Photo Draft
Photo VALTEC Sliding T-piece, d - 20(2,8), d1 - 20(2,8), d2 - 20(2,8) [Code number: VTm.431.BG.202020] Draft VALTEC Sliding T-piece, d - 20(2,8), d1 - 20(2,8), d2 - 20(2,8) [Code number: VTm.431.BG.202020]
VALTEC Sliding T-piece, d - 20(2,8), d1 - 20(2,8), d2 - 20(2,8) [Code number: VTm.431.BG.202020]
Details 		VTm.431.BG.202020 644 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type: female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А В D1 L1 D2 L2 D3 L3
mm mm mm mm mm mm mm mm mm
77 42 12,6 20 12,6 20 12,6 20

Documentation

Download data sheet: VALTEC Sliding T-piece VTm.431.BG.202020
Photo Draft
Photo VALTEC Sliding T-piece, d - 20*2,8, d1 - 25*3,5, d2 - 16*2,2 [Code number: VTm.431.BG.202516] Draft VALTEC Sliding T-piece, d - 20*2,8, d1 - 25*3,5, d2 - 16*2,2 [Code number: VTm.431.BG.202516]
VALTEC Sliding T-piece, d - 20*2,8, d1 - 25*3,5, d2 - 16*2,2 [Code number: VTm.431.BG.202516]
Details 		VTm.431.BG.202516 470 rub
Photo Draft
Photo VALTEC Sliding T-piece reducing, d - 20(2,8), d1 - 25(3,5), d2 - 20(2,8) [Code number: VTm.431.BG.202520] Draft VALTEC Sliding T-piece reducing, d - 20(2,8), d1 - 25(3,5), d2 - 20(2,8) [Code number: VTm.431.BG.202520]
VALTEC Sliding T-piece reducing, d - 20(2,8), d1 - 25(3,5), d2 - 20(2,8) [Code number: VTm.431.BG.202520]
Details 		VTm.431.BG.202520 800 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type: female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А В D1 L1 D2 L2 D3 L3
mm mm mm mm mm mm mm mm mm
93 51 12,6 20 15,4 27 12,6 20

Documentation

Download data sheet: VALTEC Sliding T-piece VTm.431.BG.202520
Photo Draft
Photo VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 16(2,2), d2 - 16(2,2) [Code number: VTm.431.BG.251616] Draft VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 16(2,2), d2 - 16(2,2) [Code number: VTm.431.BG.251616]
VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 16(2,2), d2 - 16(2,2) [Code number: VTm.431.BG.251616]
Details 		VTm.431.BG.251616 550 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type: female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А В D1 L1 D2 L2 D3 L3
mm mm mm mm mm mm mm mm mm
88 40 15,4 27 10 15,8 10 15,8

Documentation

Download data sheet: VALTEC Sliding T-piece VTm.431.BG.251616
Photo Draft
Photo VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 16(2,2), d2 - 20(2,8) [Code number: VTm.431.BG.251620] Draft VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 16(2,2), d2 - 20(2,8) [Code number: VTm.431.BG.251620]
VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 16(2,2), d2 - 20(2,8) [Code number: VTm.431.BG.251620]
Details 		VTm.431.BG.251620 769 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type: female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А В D1 L1 D2 L2 D3 L3
mm mm mm mm mm mm mm mm mm
91 40 15,4 27 10 15,8 12,6 20

Documentation

Download data sheet: VALTEC Sliding T-piece VTm.431.BG.251620
Photo Draft
Photo VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 16(2,2), d2 - 25(3,5) [Code number: VTm.431.BG.251625] Draft VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 16(2,2), d2 - 25(3,5) [Code number: VTm.431.BG.251625]
VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 16(2,2), d2 - 25(3,5) [Code number: VTm.431.BG.251625]
Details 		VTm.431.BG.251625 781 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type: female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А В D1 L1 D2 L2 D3 L3
mm mm mm mm mm mm mm mm mm
107 40 15,4 27 10 15,8 15,4 27

Documentation

Download data sheet: VALTEC Sliding T-piece VTm.431.BG.251625
Photo Draft
Photo VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 20(2,8), d2 - 16(2,2) [Code number: VTm.431.BG.252016] Draft VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 20(2,8), d2 - 16(2,2) [Code number: VTm.431.BG.252016]
VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 20(2,8), d2 - 16(2,2) [Code number: VTm.431.BG.252016]
Details 		VTm.431.BG.252016 731 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type: female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А В D1 L1 D2 L2 D3 L3
mm mm mm mm mm mm mm mm mm
90 47 15,4 27 12,6 20 10 15,8

Documentation

Download data sheet: VALTEC Sliding T-piece VTm.431.BG.252016
Photo Draft
Photo VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 20(2,8), d2 - 20(2,8) [Code number: VTm.431.BG.252020] Draft VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 20(2,8), d2 - 20(2,8) [Code number: VTm.431.BG.252020]
VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 20(2,8), d2 - 20(2,8) [Code number: VTm.431.BG.252020]
Details 		VTm.431.BG.252020 698 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type: female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А В D1 L1 D2 L2 D3 L3
mm mm mm mm mm mm mm mm mm
96 47 15,4 27 12,6 20 12,6 20

Documentation

Download data sheet: VALTEC Sliding T-piece VTm.431.BG.252020
Photo Draft
Photo VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 20(2,8), d2 - 25(3,5) [Code number: VTm.431.BG.252025] Draft VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 20(2,8), d2 - 25(3,5) [Code number: VTm.431.BG.252025]
VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 20(2,8), d2 - 25(3,5) [Code number: VTm.431.BG.252025]
Details 		VTm.431.BG.252025 861 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type: female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А В D1 L1 D2 L2 D3 L3
mm mm mm mm mm mm mm mm mm
107 47 15,4 27 12,6 20 15,4 27

Documentation

Download data sheet: VALTEC Sliding T-piece VTm.431.BG.252025
Photo Draft
Photo VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 25(3,5), d2 - 16(2,2) [Code number: VTm.431.BG.252516] Draft VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 25(3,5), d2 - 16(2,2) [Code number: VTm.431.BG.252516]
VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 25(3,5), d2 - 16(2,2) [Code number: VTm.431.BG.252516]
Details 		VTm.431.BG.252516 712 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type: female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А В D1 L1 D2 L2 D3 L3
mm mm mm mm mm mm mm mm mm
96 54 15,4 27 15,4 27 10 15,8

Documentation

Download data sheet: VALTEC Sliding T-piece VTm.431.BG.252516
Photo Draft
Photo VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 25(3,5), d2 - 20(2,8) [Code number: VTm.431.BG.252520] Draft VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 25(3,5), d2 - 20(2,8) [Code number: VTm.431.BG.252520]
VALTEC Sliding T-piece reducing, d - 25(3,5), d1 - 25(3,5), d2 - 20(2,8) [Code number: VTm.431.BG.252520]
Details 		VTm.431.BG.252520 889 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type: female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А В D1 L1 D2 L2 D3 L3
mm mm mm mm mm mm mm mm mm
100 54 15,4 27 15,4 27 12,6 20

Documentation

Download data sheet: VALTEC Sliding T-piece VTm.431.BG.252520
Photo Draft
Photo VALTEC Sliding T-piece, d - 25(3,5), d1 - 25(3,5), d2 - 25(3,5) [Code number: VTm.431.BG.252525] Draft VALTEC Sliding T-piece, d - 25(3,5), d1 - 25(3,5), d2 - 25(3,5) [Code number: VTm.431.BG.252525]
VALTEC Sliding T-piece, d - 25(3,5), d1 - 25(3,5), d2 - 25(3,5) [Code number: VTm.431.BG.252525]
Details 		VTm.431.BG.252525 888 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type: female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А В D1 L1 D2 L2 D3 L3
mm mm mm mm mm mm mm mm mm
99 53 15,4 27 15,4 27 15,4 29

Documentation

Download data sheet: VALTEC Sliding T-piece VTm.431.BG.252525
Photo Draft
Photo VALTEC Sliding T-piece, d - 32*4,4, d1 - 20*2,8, d2 - 20*2,8 [Code number: VTm.431.BG.322020] Draft VALTEC Sliding T-piece, d - 32*4,4, d1 - 20*2,8, d2 - 20*2,8 [Code number: VTm.431.BG.322020]
VALTEC Sliding T-piece, d - 32*4,4, d1 - 20*2,8, d2 - 20*2,8 [Code number: VTm.431.BG.322020]
Details 		VTm.431.BG.322020 768 rub
Photo Draft
Photo VALTEC Sliding T-piece, d - 32*4,4, d1 - 20*2,8, d2 - 25*3,5 [Code number: VTm.431.BG.322025] Draft VALTEC Sliding T-piece, d - 32*4,4, d1 - 20*2,8, d2 - 25*3,5 [Code number: VTm.431.BG.322025]
VALTEC Sliding T-piece, d - 32*4,4, d1 - 20*2,8, d2 - 25*3,5 [Code number: VTm.431.BG.322025]
Details 		VTm.431.BG.322025 801 rub
Photo Draft
Photo VALTEC Sliding tee, d - 32(4,4), d1 - 20(2,8), d2 - 32(4,4) [Code number VTm.431.BG.322032] Draft VALTEC Sliding tee, d - 32(4,4), d1 - 20(2,8), d2 - 32(4,4) [Code number VTm.431.BG.322032]
VALTEC Sliding tee, d - 32(4,4), d1 - 20(2,8), d2 - 32(4,4) [Code number VTm.431.BG.322032]
Details 		VTm.431.BG.322032 958 rub
Photo Draft
Photo VALTEC Sliding tee, d - 32(4,4), d1 - 25(3,5), d2 - 32(4,4) [Code number VTm.431.BG.322532] Draft VALTEC Sliding tee, d - 32(4,4), d1 - 25(3,5), d2 - 32(4,4) [Code number VTm.431.BG.322532]
VALTEC Sliding tee, d - 32(4,4), d1 - 25(3,5), d2 - 32(4,4) [Code number VTm.431.BG.322532]
Details 		VTm.431.BG.322532 998 rub
Photo Draft
Photo VALTEC Slip T-joint, d - 16(2,2), d1 - 16(2,2), d2 - 16(2,2) [Code number: VTm.431.G.161616] Draft VALTEC Slip T-joint, d - 16(2,2), d1 - 16(2,2), d2 - 16(2,2) [Code number: VTm.431.G.161616]
VALTEC Slip T-joint, d - 16(2,2), d1 - 16(2,2), d2 - 16(2,2) [Code number: VTm.431.G.161616]
Details 		VTm.431.G.161616 265 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is lightweight, installation is carried out by hand tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • Made of brass CW614N according to EN 12165;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А В D1 L1 D2 L2 D3 L3
mm mm mm mm mm mm mm mm
67 39 9,8 16 9,8 16 9,8 17

Documentation

Download data sheet: VALTEC Slip T-joint VTm.431.G.161616
Photo Draft
Photo VALTEC Sliding T-piece reducing, d - 16*2,2, d1 - 20*2,8, d2 - 16*2,2 [Code number: VTm.431.G.162016] Draft VALTEC Sliding T-piece reducing, d - 16*2,2, d1 - 20*2,8, d2 - 16*2,2 [Code number: VTm.431.G.162016]
VALTEC Sliding T-piece reducing, d - 16*2,2, d1 - 20*2,8, d2 - 16*2,2 [Code number: VTm.431.G.162016]
Details 		VTm.431.G.162016 337 rub
Photo Draft
Photo VALTEC Sliding T-piece reducing, d - 20*2,8, d1 - 16*2,2, d2 - 16*2,2 [Code number: VTm.431.G.201616] Draft VALTEC Sliding T-piece reducing, d - 20*2,8, d1 - 16*2,2, d2 - 16*2,2 [Code number: VTm.431.G.201616]
VALTEC Sliding T-piece reducing, d - 20*2,8, d1 - 16*2,2, d2 - 16*2,2 [Code number: VTm.431.G.201616]
Details 		VTm.431.G.201616 333 rub
Photo Draft
Photo VALTEC Тройник надвижной, d - 20*2,8, d1 - 16*2,2, d2 - 20*2,8, переходной [Code number: VTm.431.G.201620] Draft VALTEC Тройник надвижной, d - 20*2,8, d1 - 16*2,2, d2 - 20*2,8, переходной [Code number: VTm.431.G.201620]
VALTEC Тройник надвижной, d - 20*2,8, d1 - 16*2,2, d2 - 20*2,8, переходной [Code number: VTm.431.G.201620]
Details 		VTm.431.G.201620 367 rub

See also

PP-adapter Konfix etc.
Connecting elements
Strengthen connecting elements
© Inrusstrade.ru 1999-2025. "Inrusstrade" Ltd. Copying and quoting is prohibited