Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

VALTEC Axial fittings

Home→ Catalog→ VALTEC→ Multilayer systems→ Axial fittings

VALTEC axial fittings are used to create one-piece connections in drinking water supply systems, heating and hot water supply systems, domestic water supply, as well as on process pipelines that transport wastewater that is not aggressive to the materials of pipes and axial fittings.

They are suitable for pipes made of cross-linked polyethylene PEX and PE of increased heat resistance PERT series S3.2 (SDR 7.4) (corresponding to GOST 32415-2013).

Main advantages of VALTEC axial fittings:

  • the diameter of the connected pipelines is not narrowed;
  • high reliability and simplicity;
  • tightness;
  • quick and easy installation;
  • pipe material is a sealant;
  • monolithic is possible;
  • the joint can be pressurized immediately after installation.

Working pressure: 16 bar.

Maximum operating temperature: +95 °С.

Average service life: 50 years.

Photo Наименование Article Цена
Photo Draft
Photo VALTEC Slip on tee with female thread, d - 32(4,4), d1 - 1", d2 - 32(4,4) [Code number VTm.432.BG.320632] Draft VALTEC Slip on tee with female thread, d - 32(4,4), d1 - 1", d2 - 32(4,4) [Code number VTm.432.BG.320632]
VALTEC Slip on tee with female thread, d - 32(4,4), d1 - 1", d2 - 32(4,4) [Code number VTm.432.BG.320632]
Details 		VTm.432.BG.320632 1 345 rub
Photo Draft
Photo VALTEC Slip T-joint with passage to internal thread, d - 16(2,2), d1 - /2", d2 - 16(2,2) [Code number: VTm.432.G.160416] Draft VALTEC Slip T-joint with passage to internal thread, d - 16(2,2), d1 - /2", d2 - 16(2,2) [Code number: VTm.432.G.160416]
VALTEC Slip T-joint with passage to internal thread, d - 16(2,2), d1 - /2", d2 - 16(2,2) [Code number: VTm.432.G.160416]
Details 		VTm.432.G.160416 335 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is lightweight, installation is carried out by hand tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • Made of brass CW614N according to EN 12165;
  • There is a transition to female thread;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

G А В D1 L1 D2 L2 H
  mm mm mm mm mm mm mm
1/2" 80 28 9,8 16 9,8 16 12

Documentation

Download data sheet: VALTEC Slip T-joint VTm.432.G.160416
Photo Draft
Photo VALTEC Sliding T-piece, d - 20*2,8, d1 - 1/2", d2 - 20*2,8, with female thread [Code number: VTm.432.G.200420] Draft VALTEC Sliding T-piece, d - 20*2,8, d1 - 1/2", d2 - 20*2,8, with female thread [Code number: VTm.432.G.200420]
VALTEC Sliding T-piece, d - 20*2,8, d1 - 1/2", d2 - 20*2,8, with female thread [Code number: VTm.432.G.200420]
Details 		VTm.432.G.200420 428 rub
Photo Draft
Photo VALTEC Sliding T-piece, d - 20*2,8, d1 - 3/4", d2 - 20*2,8, with female thread [Code number: VTm.432.G.200520] Draft VALTEC Sliding T-piece, d - 20*2,8, d1 - 3/4", d2 - 20*2,8, with female thread [Code number: VTm.432.G.200520]
VALTEC Sliding T-piece, d - 20*2,8, d1 - 3/4", d2 - 20*2,8, with female thread [Code number: VTm.432.G.200520]
Details 		VTm.432.G.200520 508 rub
Photo Draft
Photo VALTEC Sliding T-piece, d - 25*3,5, d1 - 3/4", d2 - 25*3,5, with female thread [Code number: VTm.432.G.250525] Draft VALTEC Sliding T-piece, d - 25*3,5, d1 - 3/4", d2 - 25*3,5, with female thread [Code number: VTm.432.G.250525]
VALTEC Sliding T-piece, d - 25*3,5, d1 - 3/4", d2 - 25*3,5, with female thread [Code number: VTm.432.G.250525]
Details 		VTm.432.G.250525 695 rub
Photo Draft
Photo VALTEC Sliding T-piece, d - 16*2,2, d1 - 1/2", d2 - 16*2,2, with male thread [Code number: VTm.433.G.160416] Draft VALTEC Sliding T-piece, d - 16*2,2, d1 - 1/2", d2 - 16*2,2, with male thread [Code number: VTm.433.G.160416]
VALTEC Sliding T-piece, d - 16*2,2, d1 - 1/2", d2 - 16*2,2, with male thread [Code number: VTm.433.G.160416]
Details 		VTm.433.G.160416 308 rub
Photo Draft
Photo VALTEC Sliding T-piece, d - 20*2,8, d1 - 1/2", d2 - 20*2,8, with male thread [Code number: VTm.433.G.200420] Draft VALTEC Sliding T-piece, d - 20*2,8, d1 - 1/2", d2 - 20*2,8, with male thread [Code number: VTm.433.G.200420]
VALTEC Sliding T-piece, d - 20*2,8, d1 - 1/2", d2 - 20*2,8, with male thread [Code number: VTm.433.G.200420]
Details 		VTm.433.G.200420 445 rub
Photo Draft
Photo VALTEC Sliding T-piece, d - 20*2,8, d1 - 3/4", d2 - 20*2,8, with male thread [Code number: VTm.433.G.200520] Draft VALTEC Sliding T-piece, d - 20*2,8, d1 - 3/4", d2 - 20*2,8, with male thread [Code number: VTm.433.G.200520]
VALTEC Sliding T-piece, d - 20*2,8, d1 - 3/4", d2 - 20*2,8, with male thread [Code number: VTm.433.G.200520]
Details 		VTm.433.G.200520 520 rub
Photo Draft
Photo VALTEC Sliding T-piece, d - 25*3,5, d1 - 3/4", d2 - 25*3,5, with male thread [Code number: VTm.433.G.250525] Draft VALTEC Sliding T-piece, d - 25*3,5, d1 - 3/4", d2 - 25*3,5, with male thread [Code number: VTm.433.G.250525]
VALTEC Sliding T-piece, d - 25*3,5, d1 - 3/4", d2 - 25*3,5, with male thread [Code number: VTm.433.G.250525]
Details 		VTm.433.G.250525 689 rub
Photo Draft
Photo VALTEC Sliding T-piece, d - 32*4,4, d1 - 1", d2 - 32*4,4, with male thread [Code number: VTm.433.G.320632] Draft VALTEC Sliding T-piece, d - 32*4,4, d1 - 1", d2 - 32*4,4, with male thread [Code number: VTm.433.G.320632]
VALTEC Sliding T-piece, d - 32*4,4, d1 - 1", d2 - 32*4,4, with male thread [Code number: VTm.433.G.320632]
Details 		VTm.433.G.320632 1 122 rub
Photo Draft
Photo VALTEC Sliding elbow, d - 16*2,2, d1 - 16*2,2 [Code number: VTm.451.BG.001616] Draft VALTEC Sliding elbow, d - 16*2,2, d1 - 16*2,2 [Code number: VTm.451.BG.001616]
VALTEC Sliding elbow, d - 16*2,2, d1 - 16*2,2 [Code number: VTm.451.BG.001616]
Details 		VTm.451.BG.001616 302 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А D L
mm mm mm
39 10 15,8

Documentation

Download data sheet: VALTEC Sliding elbow VTm.451.BG.001616
Photo Draft
Photo VALTEC Sliding elbow, d - 20(2,8), d1 - 20(2,8) [Code number: VTm.451.BG.002020] Draft VALTEC Sliding elbow, d - 20(2,8), d1 - 20(2,8) [Code number: VTm.451.BG.002020]
VALTEC Sliding elbow, d - 20(2,8), d1 - 20(2,8) [Code number: VTm.451.BG.002020]
Details 		VTm.451.BG.002020 495 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А D L
mm mm mm
46 12,6 20

Documentation

Download data sheet: VALTEC Sliding elbow VTm.451.BG.002020
Photo Draft
Photo VALTEC Sliding elbow, d - 25(3,5), d1 - 25(3,5) [Code number: VTm.451.BG.002525] Draft VALTEC Sliding elbow, d - 25(3,5), d1 - 25(3,5) [Code number: VTm.451.BG.002525]
VALTEC Sliding elbow, d - 25(3,5), d1 - 25(3,5) [Code number: VTm.451.BG.002525]
Details 		VTm.451.BG.002525 715 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А D L
mm mm mm
54 15,4 27

Documentation

Download data sheet: VALTEC Sliding elbow VTm.451.BG.002525
Photo Draft
Photo VALTEC Slip elbow, d - 16(2,2), d1 - 16(2,2) [Code number: VTm.451.G.001616] Draft VALTEC Slip elbow, d - 16(2,2), d1 - 16(2,2) [Code number: VTm.451.G.001616]
VALTEC Slip elbow, d - 16(2,2), d1 - 16(2,2) [Code number: VTm.451.G.001616]
Details 		VTm.451.G.001616 195 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is lightweight, installation is carried out by hand tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • Made of brass CW614N according to EN 12165;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

А D L
mm mm mm
36 9,8 16

Documentation

Download data sheet: VALTEC Sliding elbow VTm.451.G.001616
Photo Draft
Photo VALTEC Sliding elbow, d - 20*2,8, d1 - 20*2,8 [Code number: VTm.451.G.002020] Draft VALTEC Sliding elbow, d - 20*2,8, d1 - 20*2,8 [Code number: VTm.451.G.002020]
VALTEC Sliding elbow, d - 20*2,8, d1 - 20*2,8 [Code number: VTm.451.G.002020]
Details 		VTm.451.G.002020 299 rub
Photo Draft
Photo VALTEC Sliding elbow, d - 25*3,5, d1 - 25*3,5 [Code number: VTm.451.G.002525] Draft VALTEC Sliding elbow, d - 25*3,5, d1 - 25*3,5 [Code number: VTm.451.G.002525]
VALTEC Sliding elbow, d - 25*3,5, d1 - 25*3,5 [Code number: VTm.451.G.002525]
Details 		VTm.451.G.002525 480 rub
Photo Draft
Photo VALTEC Sliding elbow, d - 32*4,4, d1 - 32*4,4 [Code number: VTm.451.G.003232] Draft VALTEC Sliding elbow, d - 32*4,4, d1 - 32*4,4 [Code number: VTm.451.G.003232]
VALTEC Sliding elbow, d - 32*4,4, d1 - 32*4,4 [Code number: VTm.451.G.003232]
Details 		VTm.451.G.003232 772 rub
Photo Draft
Photo VALTEC Sliding elbow with female thread, d - 16*2,2, d1 - 1/2" [Code number: VTm.452.BG.001604] Draft VALTEC Sliding elbow with female thread, d - 16*2,2, d1 - 1/2" [Code number: VTm.452.BG.001604]
VALTEC Sliding elbow with female thread, d - 16*2,2, d1 - 1/2" [Code number: VTm.452.BG.001604]
Details 		VTm.452.BG.001604 363 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • There is a transition to female thread;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

G А В С D H
  mm mm mm mm mm
1/2" 39 12 15,8 10 35

Documentation

Download data sheet: VALTEC Sliding elbow VTm.452.BG.001604
Photo Draft
Photo VALTEC Sliding elbow with female thread, d - 20(2,8), d1 - 1/2" [Code number: VTm.452.BG.002004] Draft VALTEC Sliding elbow with female thread, d - 20(2,8), d1 - 1/2" [Code number: VTm.452.BG.002004]
VALTEC Sliding elbow with female thread, d - 20(2,8), d1 - 1/2" [Code number: VTm.452.BG.002004]
Details 		VTm.452.BG.002004 381 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • There is a transition to female thread;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

G А В С D H
  mm mm mm mm mm
1/2" 43 12 20 12,6 36

Documentation

Download data sheet: VALTEC Sliding elbow VTm.452.BG.002004
Photo Draft
Photo VALTEC Sliding elbow with female thread, d - 20(2,8), d1 - 3/4" [Code number: VTm.452.BG.002005] Draft VALTEC Sliding elbow with female thread, d - 20(2,8), d1 - 3/4" [Code number: VTm.452.BG.002005]
VALTEC Sliding elbow with female thread, d - 20(2,8), d1 - 3/4" [Code number: VTm.452.BG.002005]
Details 		VTm.452.BG.002005 458 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • There is a transition to female thread;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

G А В С D H
  mm mm mm mm mm
3/4" 48 17 20 12,6 40

Documentation

Download data sheet: VALTEC Sliding elbow VTm.452.BG.002005

See also

PP-adapter Konfix etc.
Strengthen connecting elements
Connecting elements
© Inrusstrade.ru 1999-2025. "Inrusstrade" Ltd. Copying and quoting is prohibited