Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

VALTEC Axial fittings

Home→ Catalog→ VALTEC→ Multilayer systems→ Axial fittings

VALTEC axial fittings are used to create one-piece connections in drinking water supply systems, heating and hot water supply systems, domestic water supply, as well as on process pipelines that transport wastewater that is not aggressive to the materials of pipes and axial fittings.

They are suitable for pipes made of cross-linked polyethylene PEX and PE of increased heat resistance PERT series S3.2 (SDR 7.4) (corresponding to GOST 32415-2013).

Main advantages of VALTEC axial fittings:

  • the diameter of the connected pipelines is not narrowed;
  • high reliability and simplicity;
  • tightness;
  • quick and easy installation;
  • pipe material is a sealant;
  • monolithic is possible;
  • the joint can be pressurized immediately after installation.

Working pressure: 16 bar.

Maximum operating temperature: +95 °С.

Average service life: 50 years.

Photo Наименование Article Цена
Photo Draft
Photo VALTEC Sliding elbow with female thread, d - 25(3,5), d1 - 3/4" [Code number: VTm.452.BG.002505] Draft VALTEC Sliding elbow with female thread, d - 25(3,5), d1 - 3/4" [Code number: VTm.452.BG.002505]
VALTEC Sliding elbow with female thread, d - 25(3,5), d1 - 3/4" [Code number: VTm.452.BG.002505]
Details 		VTm.452.BG.002505 682 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • There is a transition to female thread;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

G А В С D H
  mm mm mm mm mm
3/4" 54 17 27 15,4 42

Documentation

Download data sheet: VALTEC Sliding elbow VTm.452.BG.002505
Photo Draft
Photo VALTEC Sliding elbow with female thread, d - 32(4,4), d1 - 1" [Code number VTm.452.BG.003206] Draft VALTEC Sliding elbow with female thread, d - 32(4,4), d1 - 1" [Code number VTm.452.BG.003206]
VALTEC Sliding elbow with female thread, d - 32(4,4), d1 - 1" [Code number VTm.452.BG.003206]
Details 		VTm.452.BG.003206 859 rub
Photo Draft
Photo VALTEC Slip elbow with passage to internal thread, d - 16(2,2), d1 - 1/2" [Code number: VTm.452.G.001604] Draft VALTEC Slip elbow with passage to internal thread, d - 16(2,2), d1 - 1/2" [Code number: VTm.452.G.001604]
VALTEC Slip elbow with passage to internal thread, d - 16(2,2), d1 - 1/2" [Code number: VTm.452.G.001604]
Details 		VTm.452.G.001604 234 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is lightweight, installation is carried out by hand tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • Made of brass CW614N according to EN 12165;
  • There is a transition to female thread;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

G А В С D H
  mm mm mm mm mm
1/2" 40 12 16 9,8 28

Documentation

Download data sheet: VALTEC Sliding elbow VTm.452.G.001604
Photo Draft
Photo VALTEC Sliding elbow, d - 16*2,2, d1 - 3/4", with female thread [Code number: VTm.452.G.001605] Draft VALTEC Sliding elbow, d - 16*2,2, d1 - 3/4", with female thread [Code number: VTm.452.G.001605]
VALTEC Sliding elbow, d - 16*2,2, d1 - 3/4", with female thread [Code number: VTm.452.G.001605]
Details 		VTm.452.G.001605 317 rub
Photo Draft
Photo VALTEC Sliding elbow, d - 20*2,8, d1 - 1/2", with female thread [Code number: VTm.452.G.002004] Draft VALTEC Sliding elbow, d - 20*2,8, d1 - 1/2", with female thread [Code number: VTm.452.G.002004]
VALTEC Sliding elbow, d - 20*2,8, d1 - 1/2", with female thread [Code number: VTm.452.G.002004]
Details 		VTm.452.G.002004 306 rub
Photo Draft
Photo VALTEC Sliding elbow, d - 20*2,8, d1 - 3/4", with female thread [Code number: VTm.452.G.002005] Draft VALTEC Sliding elbow, d - 20*2,8, d1 - 3/4", with female thread [Code number: VTm.452.G.002005]
VALTEC Sliding elbow, d - 20*2,8, d1 - 3/4", with female thread [Code number: VTm.452.G.002005]
Details 		VTm.452.G.002005 378 rub
Photo Draft
Photo VALTEC Sliding elbow, d - 25*3,5, d1 - 3/4", with female thread [Code number: VTm.452.G.002505] Draft VALTEC Sliding elbow, d - 25*3,5, d1 - 3/4", with female thread [Code number: VTm.452.G.002505]
VALTEC Sliding elbow, d - 25*3,5, d1 - 3/4", with female thread [Code number: VTm.452.G.002505]
Details 		VTm.452.G.002505 487 rub
Photo Draft
Photo VALTEC Sliding elbow, d - 25*3,5, d1 - 1", with female thread [Code number: VTm.452.G.002506] Draft VALTEC Sliding elbow, d - 25*3,5, d1 - 1", with female thread [Code number: VTm.452.G.002506]
VALTEC Sliding elbow, d - 25*3,5, d1 - 1", with female thread [Code number: VTm.452.G.002506]
Details 		VTm.452.G.002506 612 rub
Photo Draft
Photo VALTEC Sliding elbow with male thread, d - 16*2,2, d1 - 1/2" [Code number: VTm.453.BG.001604] Draft VALTEC Sliding elbow with male thread, d - 16*2,2, d1 - 1/2" [Code number: VTm.453.BG.001604]
VALTEC Sliding elbow with male thread, d - 16*2,2, d1 - 1/2" [Code number: VTm.453.BG.001604]
Details 		VTm.453.BG.001604 325 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • There is a transition to male thread;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

G А В С D H
  mm mm mm mm mm
1/2" 40 12 15,8 10 34

Documentation

Download data sheet: VALTEC Sliding elbow VTm.453.BG.001604
Photo Draft
Photo VALTEC Sliding elbow with male thread, d - 20(2,8), d1 - 1/2" [Code number: VTm.453.BG.002004] Draft VALTEC Sliding elbow with male thread, d - 20(2,8), d1 - 1/2" [Code number: VTm.453.BG.002004]
VALTEC Sliding elbow with male thread, d - 20(2,8), d1 - 1/2" [Code number: VTm.453.BG.002004]
Details 		VTm.453.BG.002004 447 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • There is a transition to male thread;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

G А В С D H
  mm mm mm mm mm
1/2" 42 12 20 12,6 35

Documentation

Download data sheet: VALTEC Sliding elbow VTm.453.BG.002004
Photo Draft
Photo VALTEC Sliding elbow with male thread, d - 20(2,8), d1 - 3/4" [Code number: VTm.453.BG.002005] Draft VALTEC Sliding elbow with male thread, d - 20(2,8), d1 - 3/4" [Code number: VTm.453.BG.002005]
VALTEC Sliding elbow with male thread, d - 20(2,8), d1 - 3/4" [Code number: VTm.453.BG.002005]
Details 		VTm.453.BG.002005 591 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • There is a transition to male thread;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

G А В С D H
  mm mm mm mm mm
3/4" 45 14 20 12,6 44

Documentation

Download data sheet: VALTEC Sliding elbow VTm.453.BG.002005
Photo Draft
Photo VALTEC Sliding elbow with male thread, d - 25(3,5), d1 - 3/4" [Code number: VTm.453.BG.002505] Draft VALTEC Sliding elbow with male thread, d - 25(3,5), d1 - 3/4" [Code number: VTm.453.BG.002505]
VALTEC Sliding elbow with male thread, d - 25(3,5), d1 - 3/4" [Code number: VTm.453.BG.002505]
Details 		VTm.453.BG.002505 656 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out by both manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • There is a transition to male thread;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

G А В С D H
  mm mm mm mm mm
3/4" 54 15,5 27 15,4 43

Documentation

Download data sheet: VALTEC Sliding elbow VTm.453.BG.002505
Photo Draft
Photo VALTEC Sliding elbow with male thread, d - 32(4,4), d1 - 1" [Code number VTm.453.BG.003206] Draft VALTEC Sliding elbow with male thread, d - 32(4,4), d1 - 1" [Code number VTm.453.BG.003206]
VALTEC Sliding elbow with male thread, d - 32(4,4), d1 - 1" [Code number VTm.453.BG.003206]
Details 		VTm.453.BG.003206 772 rub
Photo Draft
Photo VALTEC Slip elbow with passage to external thread, d - 16(2,2), G - 1/2" [Code number: VTm.453.G.001604] Draft VALTEC Slip elbow with passage to external thread, d - 16(2,2), G - 1/2" [Code number: VTm.453.G.001604]
VALTEC Slip elbow with passage to external thread, d - 16(2,2), G - 1/2" [Code number: VTm.453.G.001604]
Details 		VTm.453.G.001604 225 rub

Purpose of application:

  • For the installation of pipelines made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)

Characteristics:

  • non-separable connection that does not require maintenance;
  • both open and hidden laying of the pipeline is possible;
  • the connection is completely sealed;
  • due to the expansion of the pipe ends before the connection, there is no narrowing of the pipeline;
  • The body is made of CW614N brass according to EN 12165.

Nominal pressure: 16 bar.

Operating temperature of the medium: up to +95 °С.

Important! Mounted with hand tools only!

G А В C D H
  mm mm mm mm mm
1/2" 39 12 16 9,8 29

Documentation

Download product data sheet: VALTEC Slip elbow VTm.453.G.001604
Photo Draft
Photo VALTEC Sliding elbow, d - 16*2,2, d1 - 3/4", with male thread [Code number: VTm.453.G.001605] Draft VALTEC Sliding elbow, d - 16*2,2, d1 - 3/4", with male thread [Code number: VTm.453.G.001605]
VALTEC Sliding elbow, d - 16*2,2, d1 - 3/4", with male thread [Code number: VTm.453.G.001605]
Details 		VTm.453.G.001605 333 rub
Photo Draft
Photo VALTEC Sliding elbow, d - 20*2,8, d1 - 1/2", with male thread [Code number: VTm.453.G.002004] Draft VALTEC Sliding elbow, d - 20*2,8, d1 - 1/2", with male thread [Code number: VTm.453.G.002004]
VALTEC Sliding elbow, d - 20*2,8, d1 - 1/2", with male thread [Code number: VTm.453.G.002004]
Details 		VTm.453.G.002004 301 rub
Photo Draft
Photo VALTEC Sliding elbow, d - 20*2,8, d1 - 3/4", with male thread [Code number: VTm.453.G.002005] Draft VALTEC Sliding elbow, d - 20*2,8, d1 - 3/4", with male thread [Code number: VTm.453.G.002005]
VALTEC Sliding elbow, d - 20*2,8, d1 - 3/4", with male thread [Code number: VTm.453.G.002005]
Details 		VTm.453.G.002005 378 rub
Photo Draft
Photo VALTEC Sliding elbow, d - 25*3,5, d1 - 3/4", with male thread [Code number: VTm.453.G.002505] Draft VALTEC Sliding elbow, d - 25*3,5, d1 - 3/4", with male thread [Code number: VTm.453.G.002505]
VALTEC Sliding elbow, d - 25*3,5, d1 - 3/4", with male thread [Code number: VTm.453.G.002505]
Details 		VTm.453.G.002505 482 rub
Photo Draft
Photo VALTEC Sliding elbow, d - 25*3,5, d1 - 1", with male thread [Code number: VTm.453.G.002506] Draft VALTEC Sliding elbow, d - 25*3,5, d1 - 1", with male thread [Code number: VTm.453.G.002506]
VALTEC Sliding elbow, d - 25*3,5, d1 - 1", with male thread [Code number: VTm.453.G.002506]
Details 		VTm.453.G.002506 612 rub
Photo Draft
Photo VALTEC Sliding wall plate, d - 16*2,2, d1 - 1/2" [Code number: VTm.454.BG.001604] Draft VALTEC Sliding wall plate, d - 16*2,2, d1 - 1/2" [Code number: VTm.454.BG.001604]
VALTEC Sliding wall plate, d - 16*2,2, d1 - 1/2" [Code number: VTm.454.BG.001604]
Details 		VTm.454.BG.001604 406 rub

Application purpose:

  • For the installation of pipes made of cross-linked polyethylene (PEX) and PE with increased temperature resistance (PE-RT)
  • For diameters 16.0*2.2, 20.0*2.8, 25.0*3.5, 32.0*4.4
  • For heating
  • For cold (including drinking) and hot water supply
  • For technological pipelines transporting working media that are non-aggressive to fitting materials

Characteristics:

  • The sleeve is universal, installation is carried out both by manual and electric tools;
  • The resulting connection is non-separable and does not require maintenance;
  • The connection is hermetic due to the indentation of the pipe into the grooves of the fitting body fitting, which occurs when the sleeve is pushed onto the fitting fitting;
  • The open and hidden laying of the pipeline is possible;
  • It is possible to embed the fitting in the building structure (only if there is no transition to the thread);
  • The pipe ends are expanded before installation, so that the diameter is not tinned;
  • The body is made of hot forged brass CW617N, the sleeve VTm.400 is made of brass CW614N;
  • Thread type: female;
  • Nominal pressure: up to 16 bar;
  • Working temperature: up to +95 ºС.

Average life: 50 years.

G А В D H F d
  mm mm mm mm mm mm
1/2" 36 12 10 40 17,5 4,5

Documentation

Download data sheet: VALTEC Sliding wall plate VTm.454.BG.001604

See also

Connecting elements
Strengthen connecting elements
PP-adapter Konfix etc.
© Inrusstrade.ru 1999-2025. "Inrusstrade" Ltd. Copying and quoting is prohibited