Logo
Ru| En

Valtec brass elbows for multilayer pipes

Home→ Catalog→ VALTEC→ Multilayer systems→ Elbows

Valtec brass elbows are designed for connection multilayer pipes as well as pipes made of cross-linked polyethylene. The pipes can have the same or different diameter.

Some models of Valtec elbows allow to connect multilayer pipes to threaded pipes - male and female threads comply with state standards.

For the manufacture of elbows used plumbing brass CW617N. The body may have a nickel coating. O-rings made of EPDM.

Photo Name Article Price
Photo
Photo (OUT OF PRODUCTION) - VALTEC (MINKOR) Press elbow, d - 16 [Code number: MKm.251.Y.001616]
(OUT OF PRODUCTION) - VALTEC (MINKOR) Press elbow, d - 16 [Code number: MKm.251.Y.001616]
Details 		MKm.251.Y.001616
Photo
Photo (OUT OF PRODUCTION) - VALTEC (MINKOR) Press elbow, d - 20 [Code number: MKm.251.Y.002020]
(OUT OF PRODUCTION) - VALTEC (MINKOR) Press elbow, d - 20 [Code number: MKm.251.Y.002020]
Details 		MKm.251.Y.002020
Photo
Photo (OUT OF PRODUCTION) - VALTEC elbow, pressing connection, with female thread, d - 16х1/2" [Code number: MKm.252.Y.001604]
(OUT OF PRODUCTION) - VALTEC elbow, pressing connection, with female thread, d - 16х1/2" [Code number: MKm.252.Y.001604]
Details 		MKm.252.Y.001604
Photo
Photo (OUT OF PRODUCTION) - VALTEC elbow, pressing connection, with male thread, d - 16х1/2" [Code number: MKm.253.Y.001604]
(OUT OF PRODUCTION) - VALTEC elbow, pressing connection, with male thread, d - 16х1/2" [Code number: MKm.253.Y.001604]
Details 		MKm.253.Y.001604
Photo
Photo (OUT OF PRODUCTION) - VALTEC (MINKOR) Press elbow, d - 16 [Code number: MKm.351.Y.001616]
(OUT OF PRODUCTION) - VALTEC (MINKOR) Press elbow, d - 16 [Code number: MKm.351.Y.001616]
Details 		MKm.351.Y.001616
Photo
Photo (OUT OF PRODUCTION) - VALTEC (MINKOR) Press elbow, d - 20 [Code number: MKm.351.Y.002020]
(OUT OF PRODUCTION) - VALTEC (MINKOR) Press elbow, d - 20 [Code number: MKm.351.Y.002020]
Details 		MKm.351.Y.002020
Photo
Photo (OUT OF PRODUCTION) - VALTEC Press elbow with female thread, d - 16х1/2" [Code number: MKm.352.Y.001604]
(OUT OF PRODUCTION) - VALTEC Press elbow with female thread, d - 16х1/2" [Code number: MKm.352.Y.001604]
Details 		MKm.352.Y.001604
Photo
Photo (OUT OF PRODUCTION) - VALTEC Press elbow with female thread, d - 20х3/4" [Code number: MKm.352.Y.002005]
(OUT OF PRODUCTION) - VALTEC Press elbow with female thread, d - 20х3/4" [Code number: MKm.352.Y.002005]
Details 		MKm.352.Y.002005
Photo
Photo (OUT OF PRODUCTION) - VALTEC Press elbow with male thread, d - 16х1/2" [Code number: MKm.353.Y.001604]
(OUT OF PRODUCTION) - VALTEC Press elbow with male thread, d - 16х1/2" [Code number: MKm.353.Y.001604]
Details 		MKm.353.Y.001604
Photo Draft
Photo VALTEC Mounting unit with wall plates, d - 16х1/2" [Code number: VTm.224.N.001604] Photo VALTEC Mounting unit with wall plates, d - 16х1/2" [Code number: VTm.224.N.001604] Draft VALTEC Mounting unit with wall plates, d - 16х1/2" [Code number: VTm.224.N.001604]
VALTEC Mounting unit with wall plates, d - 16х1/2" [Code number: VTm.224.N.001604]
Details 		VTm.224.N.001604 1 843 rub
Photo Draft
Photo VALTEC elbow, pressing connection, d - 16 [Code number: VTm.251.N.001616] Draft VALTEC elbow, pressing connection, d - 16 [Code number: VTm.251.N.001616]
VALTEC elbow, pressing connection, d - 16 [Code number: VTm.251.N.001616]
Details 		VTm.251.N.001616 352 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D1 D2 Weight
mm mm mm mm kg/pc
42 42 16 16 0,067

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC elbow, pressing connection, d - 20 [Code number: VTm.251.N.002020] Draft VALTEC elbow, pressing connection, d - 20 [Code number: VTm.251.N.002020]
VALTEC elbow, pressing connection, d - 20 [Code number: VTm.251.N.002020]
Details 		VTm.251.N.002020 510 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D1 D2 Weight
mm mm mm mm kg/pc
44 44 20 20 0,101

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC elbow, pressing connection, d - 26 [Code number: VTm.251.N.002626] Draft VALTEC elbow, pressing connection, d - 26 [Code number: VTm.251.N.002626]
VALTEC elbow, pressing connection, d - 26 [Code number: VTm.251.N.002626]
Details 		VTm.251.N.002626 835 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D1 D2 Weight
mm mm mm mm kg/pc
49 49 26 26 0,173

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC elbow, pressing connection, d - 32 [Code number: VTm.251.N.003232] Draft VALTEC elbow, pressing connection, d - 32 [Code number: VTm.251.N.003232]
VALTEC elbow, pressing connection, d - 32 [Code number: VTm.251.N.003232]
Details 		VTm.251.N.003232 1 311 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D1 D2 Weight
mm mm mm mm kg/pc
52 52 32 32 0,238

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC elbow, pressing connection, d - 40 [Code number: VTm.251.N.004040] Draft VALTEC elbow, pressing connection, d - 40 [Code number: VTm.251.N.004040]
VALTEC elbow, pressing connection, d - 40 [Code number: VTm.251.N.004040]
Details 		VTm.251.N.004040 2 299 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D1 D2 Weight
mm mm mm mm kg/pc
63 63 40 40 0,439

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC elbow, pressing connection, with female thread, d - 16х1/2" [Code number: VTm.252.N.001604] Draft VALTEC elbow, pressing connection, with female thread, d - 16х1/2" [Code number: VTm.252.N.001604]
VALTEC elbow, pressing connection, with female thread, d - 16х1/2" [Code number: VTm.252.N.001604]
Details 		VTm.252.N.001604 345 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D G Weight
mm mm mm   kg/pc
42 28 16 1/2" 0,078

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC elbow, pressing connection, with female thread, d - 16х3/4" [Code number: VTm.252.N.001605] Draft VALTEC elbow, pressing connection, with female thread, d - 16х3/4" [Code number: VTm.252.N.001605]
VALTEC elbow, pressing connection, with female thread, d - 16х3/4" [Code number: VTm.252.N.001605]
Details 		VTm.252.N.001605 524 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D G Weight
mm mm mm   kg/pc
46 31 16 3/4" 0,093

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC elbow, pressing connection, with female thread, d - 20х1/2" [Code number: VTm.252.N.002004] Draft VALTEC elbow, pressing connection, with female thread, d - 20х1/2" [Code number: VTm.252.N.002004]
VALTEC elbow, pressing connection, with female thread, d - 20х1/2" [Code number: VTm.252.N.002004]
Details 		VTm.252.N.002004 462 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D G Weight
mm mm mm   kg/pc
44 29 20 1/2" 0,120

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC elbow, pressing connection, with female thread, d - 20х3/4" [Code number: VTm.252.N.002005] Draft VALTEC elbow, pressing connection, with female thread, d - 20х3/4" [Code number: VTm.252.N.002005]
VALTEC elbow, pressing connection, with female thread, d - 20х3/4" [Code number: VTm.252.N.002005]
Details 		VTm.252.N.002005 577 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D G Weight
mm mm mm   kg/pc
45 32 20 3/4" 0,108

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting
Photo Draft
Photo VALTEC elbow, pressing connection, with female thread, d - 26х3/4" [Code number: VTm.252.N.002605] Draft VALTEC elbow, pressing connection, with female thread, d - 26х3/4" [Code number: VTm.252.N.002605]
VALTEC elbow, pressing connection, with female thread, d - 26х3/4" [Code number: VTm.252.N.002605]
Details 		VTm.252.N.002605 754 rub

Application purpose:

  • For metal-polymer and polymer pipes
  • To create permanent connections
  • For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

  • Pressing tool attachment type - TH (according to the REMS catalog)
  • Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
  • The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
  • Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
  • O-rings made of EPDM
  • Nominal pressure 2.5 MPa
  • Working pressure 1.0 MPa
  • Maximum temperature of the working environment +115 ºС
  • Minimum storage temperature -30 ºС
  • Emergency working environment temperature +130 ºС
  • Sleeve compression force, not less than 1200 N
  • Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm 16 20 26 32 40
           
Pipe wall thickness, mm 2,0 2,0 3,0 3,0 3,5
Aluminum thickness (no more), mm 0,4 0,5 0,5 0,5 0,5
Swaging zone diameter, mm 16,7 20,7 26,7 32,7 40,8

 

А В D G Weight
mm mm mm   kg/pc
49 31 26 3/4" 0,157

Download data sheet: Press fittings for VALTEC Connecting parts for VALTEC pressfitting

See also

%d0%a1%d0%be%d0%b5%d0%b4%d0%b8%d0%bd%d0%b8%d1%82%d0%b5%d0%bb%d1%8c%d0%bd%d1%8b%d0%b5 %d0%a5%d0%be%d0%bc%d1%83%d1%82%d1%8b
Connecting elements
%d0%a3%d1%81%d0%b8%d0%bb%d0%b8%d0%b2%d0%b0%d1%8e%d1%89%d0%b8%d0%b5 %d0%a5%d0%be%d0%bc%d1%83%d1%82%d1%8b
Strengthen connecting elements
%d0%9f%d0%b5%d1%80%d0%b5%d1%85%d0%be%d0%b4%d1%8b %d0%bd%d0%b0 %d0%bf%d0%bb%d0%b0%d1%81%d1%82%d0%b8%d0%ba
PP-adapter Konfix etc.

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited