Valtec brass elbows | Inrusstrade

VALTEC elbow, pressing connection, with female thread, d - 26х1" [Code number: VTm.252.N.002606]

Details

VTm.252.N.002606

761 rub

Application purpose:

For metal-polymer and polymer pipes
To create permanent connections
For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

Pressing tool attachment type - TH (according to the REMS catalog)
Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
O-rings made of EPDM
Nominal pressure 2.5 MPa
Working pressure 1.0 MPa
Maximum temperature of the working environment +115 ºС
Minimum storage temperature -30 ºС
Emergency working environment temperature +130 ºС
Sleeve compression force, not less than 1200 N
Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm	16	20	26	32	40

Pipe wall thickness, mm	2,0	2,0	3,0	3,0	3,5
Aluminum thickness (no more), mm	0,4	0,5	0,5	0,5	0,5
Swaging zone diameter, mm	16,7	20,7	26,7	32,7	40,8

А	В	D	G	Weight
mm	mm	mm		kg/pc
52	38	26	1"	0,172

Download data sheet: Connecting parts for VALTEC pressfitting

VALTEC elbow, pressing connection, with female thread, d - 32х1" [Code number: VTm.252.N.003206]

Details

VTm.252.N.003206

1 048 rub

Application purpose:

For metal-polymer and polymer pipes
To create permanent connections
For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

Pressing tool attachment type - TH (according to the REMS catalog)
Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
O-rings made of EPDM
Nominal pressure 2.5 MPa
Working pressure 1.0 MPa
Maximum temperature of the working environment +115 ºС
Minimum storage temperature -30 ºС
Emergency working environment temperature +130 ºС
Sleeve compression force, not less than 1200 N
Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm	16	20	26	32	40

Pipe wall thickness, mm	2,0	2,0	3,0	3,0	3,5
Aluminum thickness (no more), mm	0,4	0,5	0,5	0,5	0,5
Swaging zone diameter, mm	16,7	20,7	26,7	32,7	40,8

А	В	D	G	Weight
mm	mm	mm		kg/pc
52	39	32	1"	0,228

Download data sheet: Connecting parts for VALTEC pressfitting

VALTEC elbow, pressing connection, with transition to press-fitting 15mm, d - 16mm [Code number: VTm.253.I.001615]

Details

VTm.253.I.001615

VALTEC elbow, pressing connection, with transition to press-fitting 15mm, d - 20mm [Code number: VTm.253.I.002015]

Details

VTm.253.I.002015

VALTEC elbow, pressing connection, with male thread, d - 16х1/2" [Code number: VTm.253.N.001604]

Details

VTm.253.N.001604

255 rub

Application purpose:

For metal-polymer and polymer pipes
To create permanent connections
For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

Pressing tool attachment type - TH (according to the REMS catalog)
Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
O-rings made of EPDM
Nominal pressure 2.5 MPa
Working pressure 1.0 MPa
Maximum temperature of the working environment +115 ºС
Minimum storage temperature -30 ºС
Emergency working environment temperature +130 ºС
Sleeve compression force, not less than 1200 N
Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm	16	20	26	32	40

Pipe wall thickness, mm	2,0	2,0	3,0	3,0	3,5
Aluminum thickness (no more), mm	0,4	0,5	0,5	0,5	0,5
Swaging zone diameter, mm	16,7	20,7	26,7	32,7	40,8

А	В	D	G	Weight
mm	mm	mm		kg/pc
42	28	16	1/2"	0,061

Download data sheet: Connecting parts for VALTEC pressfitting

VALTEC elbow, pressing connection, with male thread, d - 16х3/4" [Code number: VTm.253.N.001605]

Details

VTm.253.N.001605

420 rub

Application purpose:

For metal-polymer and polymer pipes
To create permanent connections
For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

Pressing tool attachment type - TH (according to the REMS catalog)
Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
O-rings made of EPDM
Nominal pressure 2.5 MPa
Working pressure 1.0 MPa
Maximum temperature of the working environment +115 ºС
Minimum storage temperature -30 ºС
Emergency working environment temperature +130 ºС
Sleeve compression force, not less than 1200 N
Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm	16	20	26	32	40

Pipe wall thickness, mm	2,0	2,0	3,0	3,0	3,5
Aluminum thickness (no more), mm	0,4	0,5	0,5	0,5	0,5
Swaging zone diameter, mm	16,7	20,7	26,7	32,7	40,8

А	В	D	G	Weight
mm	mm	mm		kg/pc
43	30	16	3/4"	0,101

Download data sheet: Connecting parts for VALTEC pressfitting

VALTEC elbow, pressing connection, with male thread, d - 20х1/2" [Code number: VTm.253.N.002004]

Details

VTm.253.N.002004

366 rub

Application purpose:

For metal-polymer and polymer pipes
To create permanent connections
For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

Pressing tool attachment type - TH (according to the REMS catalog)
Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
O-rings made of EPDM
Nominal pressure 2.5 MPa
Working pressure 1.0 MPa
Maximum temperature of the working environment +115 ºС
Minimum storage temperature -30 ºС
Emergency working environment temperature +130 ºС
Sleeve compression force, not less than 1200 N
Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm	16	20	26	32	40

Pipe wall thickness, mm	2,0	2,0	3,0	3,0	3,5
Aluminum thickness (no more), mm	0,4	0,5	0,5	0,5	0,5
Swaging zone diameter, mm	16,7	20,7	26,7	32,7	40,8

А	В	D	G	Weight
mm	mm	mm		kg/pc
44	29	20	1/2"	0,081

Download data sheet: Connecting parts for VALTEC pressfitting

VALTEC elbow, pressing connection, with male thread, d - 20х3/4" [Code number: VTm.253.N.002005]

Details

VTm.253.N.002005

450 rub

Application purpose:

For metal-polymer and polymer pipes
To create permanent connections
For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

Pressing tool attachment type - TH (according to the REMS catalog)
Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
O-rings made of EPDM
Nominal pressure 2.5 MPa
Working pressure 1.0 MPa
Maximum temperature of the working environment +115 ºС
Minimum storage temperature -30 ºС
Emergency working environment temperature +130 ºС
Sleeve compression force, not less than 1200 N
Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm	16	20	26	32	40

Pipe wall thickness, mm	2,0	2,0	3,0	3,0	3,5
Aluminum thickness (no more), mm	0,4	0,5	0,5	0,5	0,5
Swaging zone diameter, mm	16,7	20,7	26,7	32,7	40,8

А	В	D	G	Weight
mm	mm	mm		kg/pc
44	32	20	3/4"	0,099

Download data sheet: Connecting parts for VALTEC pressfitting

VALTEC elbow, pressing connection, with male thread, d - 26х3/4" [Code number: VTm.253.N.002605]

Details

VTm.253.N.002605

577 rub

Application purpose:

For metal-polymer and polymer pipes
To create permanent connections
For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

Pressing tool attachment type - TH (according to the REMS catalog)
Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
O-rings made of EPDM
Nominal pressure 2.5 MPa
Working pressure 1.0 MPa
Maximum temperature of the working environment +115 ºС
Minimum storage temperature -30 ºС
Emergency working environment temperature +130 ºС
Sleeve compression force, not less than 1200 N
Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm	16	20	26	32	40

Pipe wall thickness, mm	2,0	2,0	3,0	3,0	3,5
Aluminum thickness (no more), mm	0,4	0,5	0,5	0,5	0,5
Swaging zone diameter, mm	16,7	20,7	26,7	32,7	40,8

А	В	D	G	Weight
mm	mm	mm		kg/pc
49	34	26	3/4"	0,144

Download data sheet: Connecting parts for VALTEC pressfitting

VALTEC elbow, pressing connection, with male thread, d - 26х1" [Code number: VTm.253.N.002606]

Details

VTm.253.N.002606

723 rub

Application purpose:

For metal-polymer and polymer pipes
To create permanent connections
For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

Pressing tool attachment type - TH (according to the REMS catalog)
Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
O-rings made of EPDM
Nominal pressure 2.5 MPa
Working pressure 1.0 MPa
Maximum temperature of the working environment +115 ºС
Minimum storage temperature -30 ºС
Emergency working environment temperature +130 ºС
Sleeve compression force, not less than 1200 N
Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm	16	20	26	32	40

Pipe wall thickness, mm	2,0	2,0	3,0	3,0	3,5
Aluminum thickness (no more), mm	0,4	0,5	0,5	0,5	0,5
Swaging zone diameter, mm	16,7	20,7	26,7	32,7	40,8

А	В	D	G	Weight
mm	mm	mm		kg/pc
49	37	26	1"	0,168

Download data sheet: Connecting parts for VALTEC pressfitting

VALTEC elbow, pressing connection, with male thread, d - 32х1" [Code number: VTm.253.N.003206]

Details

VTm.253.N.003206

1 147 rub

Application purpose:

For metal-polymer and polymer pipes
To create permanent connections
For connecting a polypropylene pipeline and an engineering system component with a threaded connection at an angle of 90° to each other

Characteristics:

Pressing tool attachment type - TH (according to the REMS catalog)
Thread type on adapter connectors - pipe thread, according to GOST 6357-81, accuracy class "B"
The material of the press fitting body is made of hot-stamped (GOSH) nickel-plated brass of the CW617N brand according to EN 12165 (corresponds to the LS 59-2 brand according to GOST 15527-2004)
Press sleeve made of stainless steel AISI 304 (corresponds to grade 08X18H9 in accordance with GOST 5632-2014)
O-rings made of EPDM
Nominal pressure 2.5 MPa
Working pressure 1.0 MPa
Maximum temperature of the working environment +115 ºС
Minimum storage temperature -30 ºС
Emergency working environment temperature +130 ºС
Sleeve compression force, not less than 1200 N
Average full service life 50 years

Allowable pipe parameters:

Outer pipe diameter, mm	16	20	26	32	40

Pipe wall thickness, mm	2,0	2,0	3,0	3,0	3,5
Aluminum thickness (no more), mm	0,4	0,5	0,5	0,5	0,5
Swaging zone diameter, mm	16,7	20,7	26,7	32,7	40,8

А	В	D	G	Weight
mm	mm	mm		kg/pc
51	39	32	1"	0,274

Download data sheet: Connecting parts for VALTEC pressfitting

VALTEC Press elbow 90˚, d - 16 [Code number: VTm.351.N.001616]

Details

VTm.351.N.001616

316 rub

Application purpose:

For drinking and domestic water supply systems
For hot water
For heating
For connection two metal-polymer (metal-plastic) pipes of equal diameter at an angle of 90°

Characteristics:

Housing made of hot stamped (GOSH) nickel-plated brass grade CW617N to EN 12165
EPDM O-rings
Nominal pressure 25 bar
Operating pressure 10 bar
The maximum temperature of working environment is up to +115 ºС
The minimum temperature of working environment is up to -30 ºС
Average life of 50 years

D1	D2	А	В	Weight
mm	mm	mm	mm	kg/pc
16	16	36	36	0,101

Download data sheet: VALTEC Compression fittings

VALTEC Press elbow 90˚, d - 20 [Code number: VTm.351.N.002020]

Details

VTm.351.N.002020

584 rub

Application purpose:

For drinking and domestic water supply systems
For hot water
For heating
For connection two metal-polymer (metal-plastic) pipes of equal diameter at an angle of 90°

Characteristics:

Housing made of hot stamped (GOSH) nickel-plated brass grade CW617N to EN 12165
EPDM O-rings
Nominal pressure 25 bar
Operating pressure 10 bar
The maximum temperature of working environment is up to +115 ºС
The minimum temperature of working environment is up to -30 ºС
Average life of 50 years

D1	D2	А	В	Weight
mm	mm	mm	mm	kg/pc
20	20	38,5	38,5	0,201

Download data sheet: VALTEC Compression fittings

VALTEC Press elbow 90˚, d - 26 [Code number: VTm.351.N.002626]

Details

VTm.351.N.002626

780 rub

Application purpose:

For drinking and domestic water supply systems
For hot water
For heating
For connection two metal-polymer (metal-plastic) pipes of equal diameter at an angle of 90°

Characteristics:

Housing made of hot stamped (GOSH) nickel-plated brass grade CW617N to EN 12165
EPDM O-rings
Nominal pressure 25 bar
Operating pressure 10 bar
The maximum temperature of working environment is up to +115 ºС
The minimum temperature of working environment is up to -30 ºС
Average life of 50 years

D1	D2	А	В	Weight
mm	mm	mm	mm	kg/pc
26	26	44	44	0,260

Download data sheet: VALTEC Compression fittings

VALTEC Press elbow 90˚, d - 32 [Code number: VTm.351.N.003232]

Details

VTm.351.N.003232

1 975 rub

Application purpose:

For drinking and domestic water supply systems
For hot water
For heating
For connection two metal-polymer (metal-plastic) pipes of equal diameter at an angle of 90°

Characteristics: