Logo
Ru| En
Loading

Bends of PAM-GLOBAL PLUS system

Bends of PAM-GLOBAL PLUS system are made of cast iron, as well as the other system components, and they belong to the class of fire safety A1. Smoke not blow out from pipeline system and it is removed through ventilation. The all elements of PAM-GLOBAL PLUS system from SAINT-GOBAIN Groip are recommended for use in hospitals, food industry, chemical plants because they have high resistance to chemicals and reagents (see. table). They can be use for installation below ground.

Also the bens are characterized by low noise level, strength and durability. The bends are easily installed and they require little maintenance. Bends of PAM-GLOBAL PLUS system have a low coefficient of thermal expansion - it makes them insensitive to heat and cold. You can concrete PAM-GLOBAL PLUS system.

Bend PAM-GLOBAL® Plus 15˚

Nominal internal diameter X Weight Code number
DN mm kg  
50 40 0,47 155202
80 45 0,68 176781
100 50 1,15 155237
125 60 1,77 155262
150 65 2,40 155278
200 80 4,40 173774
400 100 21,40 on order

Bend PAM-GLOBAL® Plus 22˚

Nominal internal diameter L H W a q Weight Code number
DN mm mm mm mm mm kg  
50 70 88 58 40 66 0,45 155308
75 97 105 83 47 74 0,8 155327
100 126 125 110 54 84 1,3 155358
125 152 143 135 61 92 1,9 155396
150 179 162 160 69 102 2,6 155421
200 233 200 210 83 122 4,4 155455
250 300 240 274 100 138 9,5 155482
300 356 279 326 115 157 15,3 155499
400 466 324 429 142 177 23,7 on order

Bend PAM-GLOBAL® Plus 30˚

Nominal internal diameter X Weight Code number
DN mm kg  
50 45 0,47 155203
80 50 0,79 176782
100 60 1,40 155238
125 70 2,00 155263
150 80 3,00 155279
200 95 5,10 179335
250 110 9,50 179336
300 130 13,80 179337

Bend PAM-GLOBAL® Plus 45˚

Nominal internal diameter X Weight Code number
DN mm kg  
50 50 0,56 155201
80 60 0,79 176735
100 70 1,40 155236
125 80 2,25 155261
150 90 3,00 155277
200 110 5,30 155289
250 130 9,50 155481
300 155 15,90 155498
400 247 34,40 155509

Bend PAM-GLOBAL® Plus 68˚

Nominal internal diameter X Weight Code number
DN mm kg  
50 65 0,72 155200
80 80 1,05 176736
100 90 1,75 155235
125 105 2,90 155260
150 120 4,10 155276
200 145 7,10 155452
250 170 14,70 155480
300 200 20 155497

Bend PAM-GLOBAL® Plus 88˚

Nominal internal diameter X Weight Code number
DN mm kg  
50 75 0,72 155199
80 95 1,3 176737
100 110 2,0 155234
125 125 3,2 155259
150 145 4,1 155275
200 180 7,8 155451
250 223 13,5 155479
300 280 27,7 155496
400 466 59 on order

Bend PAM-GLOBAL® Plus 45˚ with elongated side 250mm

Nominal internal diameter X1 X2 K Weight Code number
DN mm mm mm kg  
100 250 70 180 4,2 155243

Bend PAM-GLOBAL® Plus 88˚ with elongated side 250mm

Nominal internal diameter X1 X2 K Weight Code number
DN mm mm mm kg  
100 250 110 140 3,6 155242

Double bend PAM-GLOBAL® Plus 88˚

Nominal internal diameter L H W a b c o Weight Code number
DN mm mm mm mm mm mm mm kg  
50 148 148 58 121 50 100 148 1 179343
75 183 183 83 145 60 120 183 1,5 235801
100 228 228 110 170 70 140 228 2,8 155359
150 303 303 160 219 90 180 303 6,3 155422

Bend PAM-GLOBAL® Plus 135˚ for bypass line

Nominal internal diameter X K L Weight Code number
DN mm mm mm kg  
100 312 100 150 5,0 155239

Bend PAM-GLOBAL® Plus 88˚ (two joint bends 44) and soothing area 250mm

The bend is used for the transition from the risers to the decelerated areas of the system. According to DIN 1986, Part 1 in respect of risers, which run from 4 to 8 stories or have length from 10 to 22 m, special stowage arrangements are necessary. Transitions in horizontal pipelines, as well as the bend on the sides of the supply and runoff during the joint laying, must be separated by inserting of length of 250 mm.

Nominal internal diameter X1 X2 X3 Weight Code number
DN mm mm mm kg  
100 70 312 291 4,8 155240
125 80 322 308 6,1 179341
150 90 334 326 9,6 179342

PAM-GLOBAL® Plus Offset bend 130 mm

Nominal internal diameter X L Weight Code number
DN mm mm kg  
100 70 270 3,7 155241

PAM-GLOBAL® Plus Object connection bend 90° for wash-basins, sinks and urinal units

Nominal internal diameter X1 X2 K1 K2 Weight Code number
DN mm mm mm mm kg  
50 x 50 200 110 120 25 1,4 155205
50 x 60 200 110 120 30 1,6 155206

See also