Logo
Ru| En
Loading

Ostendorf HT internal drainage system

Ostendorf HT is an internal drainage system and it meets all the requirements of modern drainage systems. Pipes and fittings are painted in RAL 7037 gray dust (part of the range is white). The system is able to withstand pressure up to 0.5 bar.

Main advantages:

  • it is possible to use in all areas of high-rise construction;
  • high mechanical and acoustic characteristics - the modified structure of the feedstock protects against noise. Studies have shown that the HT sewage noise level is only 26 dB (A);
  • resistance to corrosion;
  • chemical resistance;
  • resistance to hot water;
  • low flammability according to class B1;
  • simplified installation due to the presence of centimeter marking;
  • completely smooth inner surface, due to which no growths form inside the pipes;
  • products are manufactured according to DIN EN 1451-1 and DIN 19560-10.

Products catalog

Ostendorf HT pipes are made of modified polypropylene according to DIN EN 1451-1 and DIN 19560-10. The pipes bear a centimeter ruler which simplifies the installation process. They are suitab...
Ostendorf HT bends have an inclination angle of 15°, 30°, 45°, 67° and 87°. They are painted in gray but there are special bends which are painted in white. They bend is a bent pipe intended for...
Ostendorf HT T-pieces are designed for connection to the main pipe of an additional branch at an angle of 45°, 67° or 87°. They are made of polypropylene according to DIN EN 1451-1 and DIN 19560...
Ostendorf HT pipe crosses allow connecting to the main pipe two additional branches at an angle of 45°, 67° or 67°. Pipe crosses are divided into several types: Double branches; Corner b...
Ostendorf HT cleaning pipes are a pipe with an inspection hole which is closing round cover. This type of fitting is installed to monitor the condition of pipeline system - it is the revisions t...
The group of products includes: Eccentric reducers designed to connect the Ostendorf HT pipes and fittings with different diameters (can be standard size and shortened, gray or white); Conn...
There are several types of Ostendorf HT couplers: Couplers; Slip couplers which are easily pushed into place requiring repair; Long sockets which are designed to compensate for temperatur...
Ostendorf HT plugs are designed for closing the dead ends of pipeline. They are made of polypropylene and have all the characteristics that are characteristic of the Ostendorf HT system: T...
Ostendorf PP plug-in socket with a diameter of 110 mm is also called a socket reducing agent and is used in cases when for some reason the socket of a pipe of the corresponding diameter has been de...
This group of products includes: Gasket for siphon bend and cast-iron pipe; Lip seals; Inner reducers which are installed on the plain end of pipe; Plug-in sockets for restoring the soc...