Fire-resistant impregnations, varnishes and paints Ogneza

Application purpose:

• For priming surfaces (metal and wood) before applying enamel

Characteristics:

• color: red-brown;
• it is recommended to apply a layer with a thickness of 15-20 microns;
• approximate consumption is 45-60 g/m2;
• it is recommended to apply 1-2 layers;
• an additional anti-corrosion layer is created;
• improved interlayer adhesion;
• the consumption of the material used for applying the subsequent layer is reduced.

Weight: 20 kg.

Application purpose:

• For priming surfaces (metal and wood) before applying enamel

Characteristics:

• color: light gray;
• it is recommended to apply a layer with a thickness of 15-20 microns;
• approximate consumption is 45-60 g/m2;
• it is recommended to apply 1-2 layers;
• an additional anti-corrosion layer is created;
• improved interlayer adhesion;
• the consumption of the material used for applying the subsequent layer is reduced.

Weight: 20 kg.

Application purpose:

• For fire protection of wooden structures
• For indoor spaces

Characteristics:

• adhesion 1 point;
• paint is easy to apply with a brush, roller or spray;
• non-toxic;
• white;
• after drying, a film with a matte surface is formed;
• operating temperature from -40 to +60 °С;
• coating is finally formed in no more than 7 days.

Recommendations for use:

• the wood is pre-treated with a compatible antiseptic - to check compatibility, Ogneza paint is applied to the wood treated with an antiseptic for 1-2 hours, if after this time the paint lies in an even layer, then the antiseptic is compatible with the paint;
• paint is applied in 2-4 layers with a roller, brush or in bulk;
• after each layer, intermediate drying is necessary for 3-8 hours at a temperature of +20 (± 2) °С;
• before application, the paint is thoroughly mixed, if necessary, it should be diluted with water (viscosity level should not exceed 5% of the total mass);
• approximate consumption: 0.52 kg / m2 to achieve I group PB, 0.3 kg / m2 - for group II.

Weight: 25 kg.

Application purpose:

• For fire protection of wooden structures
• For indoor spaces

Characteristics:

• adhesion 1 point;
• paint is easy to apply with a brush, roller or spray;
• non-toxic;
• white;
• after drying, a film with a matte surface is formed;
• operating temperature from -40 to +60 °С;
• coating is finally formed in no more than 7 days.

Recommendations for use:

• the wood is pre-treated with a compatible antiseptic - to check compatibility, Ogneza paint is applied to the wood treated with an antiseptic for 1-2 hours, if after this time the paint lies in an even layer, then the antiseptic is compatible with the paint;
• paint is applied in 2-4 layers with a roller, brush or in bulk;
• after each layer, intermediate drying is necessary for 3-8 hours at a temperature of +20 (± 2) °С;
• before application, the paint is thoroughly mixed, if necessary, it should be diluted with water (viscosity level should not exceed 5% of the total mass);
• approximate consumption: 0.52 kg / m2 to achieve I group PB, 0.3 kg / m2 - for group II.

Weight: 3 kg.

Application purpose:

• For fire protection of various types of cables
• To protect cables from rodents

Characteristics:

• properties do not change at a constant humidity of 80%;
• differs in elasticity thanks to what paint remains on a cable surface at any manipulations;
• paint is easy to apply with a brush, roller or spray;
• excellent adhesion, including to materials based on PE;
• fire protection efficiency according to GOST 53311-2009;
• layer thickness: 0.64 mm;
• one-component paint;
• paint expands at least 20 times under the influence of high temperatures;
• operating temperature from -60 to +50 °C.

Recommendations for use:

• the surface does not require priming before applying the paint;
• applied at temperatures from +5 to +40 °C;
• before application, the paint is thoroughly mixed, if necessary, it should be diluted with water (viscosity level should not exceed 5% of the total mass).

Weight: 25 kg.

Application purpose:

• For fire protection of various types of cables
• To protect cables from rodents

Characteristics:

• properties do not change at a constant humidity of 80%;
• differs in elasticity thanks to what paint remains on a cable surface at any manipulations;
• paint is easy to apply with a brush, roller or spray;
• excellent adhesion, including to materials based on PE;
• fire protection efficiency according to GOST 53311-2009;
• layer thickness: 0.64 mm;
• one-component paint;
• paint expands at least 20 times under the influence of high temperatures;
• operating temperature from -60 to +50 °C.

Recommendations for use:

• the surface does not require priming before applying the paint;
• applied at temperatures from +5 to +40 °C;
• before application, the paint is thoroughly mixed, if necessary, it should be diluted with water (viscosity level should not exceed 5% of the total mass).

Weight: 3 kg.

Application purpose:

• For mineral surfaces that are used indoors
• For surface treatment before using the paint "OGNEZA" KM0 - thanks to the primer, the mineral base is strengthened and the consumption of the finish coating is reduced

Characteristics:

• water-borne soil;
• well absorbed;
• increases surface adhesion;
• easy to apply;
• non-toxic;
• vapor permeable;
• reduces the absorbency of the substrate;
• resistant to cold;
• the primer is stored in a tightly closed PE container in a dry closed room (temperature from +5 to +40°C;
• a short-term decrease in temperature to -40 ° C is possible (no more than 5 freeze / thaw cycles for up to 6 hours are allowed);
• service life: 30 years (at temperatures from -50 to +80°C).

Installation recommendations:

• the surface before application is cleaned of fats, dirt, lubricating oils, etc., while cement laitance and unevenly holding areas of the base are removed;
• applied at temperatures from +5 to +35°C;
• the soil is thoroughly mixed before application;
• 1 or 2 layers are applied to the surface (depending on the type of surface, its dusting and porosity);
• the time required to dry the layer, 1 hour;
• approximate consumption is 180-220 g/m2.

Weight: 10 l.

Application purpose:

• For mineral surfaces that are used indoors
• For surface treatment before using the paint "OGNEZA" KM0 - thanks to the primer, the mineral base is strengthened and the consumption of the finish coating is reduced

Characteristics:

• water-borne soil;
• well absorbed;
• increases surface adhesion;
• easy to apply;
• non-toxic;
• vapor permeable;
• reduces the absorbency of the substrate;
• resistant to cold;
• the primer is stored in a tightly closed PE container in a dry closed room (temperature from +5 to +40°C;
• a short-term decrease in temperature to -40 ° C is possible (no more than 5 freeze / thaw cycles for up to 6 hours are allowed);
• service life: 30 years (at temperatures from -50 to +80°C).

Installation recommendations:

• the surface before application is cleaned of fats, dirt, lubricating oils, etc., while cement laitance and unevenly holding areas of the base are removed;
• applied at temperatures from +5 to +35°C;
• the soil is thoroughly mixed before application;
• 1 or 2 layers are applied to the surface (depending on the type of surface, its dusting and porosity);
• the time required to dry the layer, 1 hour;
• approximate consumption is 180-220 g/m2.

Weight: 5 l.

Application purpose:

• For comprehensive fire protection of air outlets
• For sealing flange connections of air outlets
• For installation of pierced basalt material

Characteristics:

• excellent adhesive properties to basalt material and metal;
• fireproof;
• environmentally friendly (there are no emissions of harmful substances during operation and storage);
• glue one-component and completely ready to use.

Operating principle:

Provides stable fixation of glued surfaces under the influence of fire. The adhesive is non-flammable.

Recommendations for use:

• when stored in the original container, separation of the composition is allowed - the dumpling will again meet the requirements after thorough mixing;
• applied with a spatula or spraying device, it is also possible to use a gun;
• when using it is necessary to put on respirators linden "Petal";
• storage and transportation are possible at temperatures from +5°С to +40°С;
• short-term freezing at temperatures up to -40 ° C is allowed;
• complete drying time no more than 24 hours;
• service life - 30 years.

Weight: 30 kg.

Application purpose:

• For comprehensive fire protection of air outlets
• For sealing flange connections of air outlets
• For installation of pierced basalt material

Characteristics:

• excellent adhesive properties to basalt material and metal;
• fireproof;
• environmentally friendly (there are no emissions of harmful substances during operation and storage);
• glue one-component and completely ready to use.

Operating principle:

Provides stable fixation of glued surfaces under the influence of fire. The adhesive is non-flammable.

Recommendations for use:

• when stored in the original container, separation of the composition is allowed - the dumpling will again meet the requirements after thorough mixing;
• applied with a spatula or spraying device, it is also possible to use a gun;
• when using it is necessary to put on respirators linden "Petal";
• storage and transportation are possible at temperatures from +5°С to +40°С;
• short-term freezing at temperatures up to -40 ° C is allowed;
• complete drying time no more than 24 hours;
• service life - 30 years.

Weight: 310 ml.

Application purpose:

• For mineral surfaces
• For protection against fire and extreme temperatures of concrete and brick walls and ceilings

Characteristics:

• non-combustible;
• fire safety class KM0;
• can be applied by roller, brush or spray;
• tinted without loss of fire-retardant properties;
• non-toxic;
• dries quickly;
• cold resistant.

Recommendations for use:

• the surface is primed with a silicate primer before applying the paint;
• applied at temperatures from +5 to +40 °C;
• before application, the paint is thoroughly mixed, if necessary, it should be diluted with water (viscosity level should not exceed 5% of the total mass);
• the approximate consumption for applying one layer is 150 g/m2. Application of 2-3 layers is recommended.

Weight: 30 kg.

Application purpose:

• For mineral surfaces
• For protection against fire and extreme temperatures of concrete and brick walls and ceilings

Characteristics:

• non-combustible;
• fire safety class KM0;
• can be applied by roller, brush or spray;
• tinted without loss of fire-retardant properties;
• non-toxic;
• dries quickly;
• cold resistant.

Recommendations for use:

• the surface is primed with a silicate primer before applying the paint;
• applied at temperatures from +5 to +40 °C;
• before application, the paint is thoroughly mixed, if necessary, it should be diluted with water (viscosity level should not exceed 5% of the total mass);
• the approximate consumption for applying one layer is 150 g/m2. Application of 2-3 layers is recommended.

Weight: 4,5 kg.

Application purpose:

• To protect wooden and parquet floors, roofing and load-bearing structures and other wood products from fire
• To improve the wear resistance of fire retardant coatings
• For finishing the facades of houses made of wood

Characteristics:

• fire safety class is high;
• can be used both inside buildings and outside;
• wear-resistant;
• self-priming varnish;
• resistant to water;
• weatherproof;
• glossy;
• one-component, which simplifies the use of varnish;
• fire-retardant properties are maintained for 10 years;
• resistant to UV rays.

Recommendations for use:

• applied at temperatures from +5°С to +40°С;
• before application, the varnish must be mixed, and if necessary, diluted with P-4 solvent - the working viscosity should be no more than 5% of the total mass;
• varnish is applied with a pneumatic sprayer or brush / roller;
• the approximate consumption for 1 layer is 135 g/m2.

Weight: 2.4 l (1.8 kg).

Application purpose:

• To protect wooden and parquet floors, roofing and load-bearing structures and other wood products from fire
• To improve the wear resistance of fire retardant coatings
• For finishing the facades of houses made of wood

Characteristics:

• fire safety class is high;
• can be used both inside buildings and outside;
• wear-resistant;
• self-priming varnish;
• resistant to water;
• weatherproof;
• glossy;
• one-component, which simplifies the use of varnish;
• fire-retardant properties are maintained for 10 years;
• resistant to UV rays.

Recommendations for use:

• applied at temperatures from +5°С to +40°С;
• before application, the varnish must be mixed, and if necessary, diluted with P-4 solvent - the working viscosity should be no more than 5% of the total mass;
• varnish is applied with a pneumatic sprayer or brush / roller;
• the approximate consumption for 1 layer is 135 g/m2.

Weight: 20 l (18 kg).

Application purpose:

• To protect wooden and parquet floors, roofing and load-bearing structures and other wood products from fire
• To improve the wear resistance of fire retardant coatings
• For finishing the facades of houses made of wood

Characteristics:

• fire safety class is high;
• can be used both inside buildings and outside;
• wear-resistant;
• self-priming varnish;
• resistant to water;
• weatherproof;
• matte;
• one-component, which simplifies the use of varnish;
• fire-retardant properties are maintained for 10 years;
• resistant to UV rays.

Recommendations for use:

• applied at temperatures from +5°С to +40°С;
• before application, the varnish must be mixed, and if necessary, diluted with P-4 solvent - the working viscosity should be no more than 5% of the total mass;
• varnish is applied with a pneumatic sprayer or brush / roller;
• the approximate consumption for 1 layer is 135 g/m2.

Weight: 2.4 l (1.8 kg).

Application purpose:

• To protect wooden and parquet floors, roofing and load-bearing structures and other wood products from fire
• To improve the wear resistance of fire retardant coatings
• For finishing the facades of houses made of wood

Characteristics:

• fire safety class is high;
• can be used both inside buildings and outside;
• wear-resistant;
• self-priming varnish;
• resistant to water;
• weatherproof;
• matte;
• one-component, which simplifies the use of varnish;
• fire-retardant properties are maintained for 10 years;
• resistant to UV rays.

Recommendations for use:

• applied at temperatures from +5°С to +40°С;
• before application, the varnish must be mixed, and if necessary, diluted with P-4 solvent - the working viscosity should be no more than 5% of the total mass;
• varnish is applied with a pneumatic sprayer or brush / roller;
• the approximate consumption for 1 layer is 135 g/m2.

Weight: 20 l (18 kg).

Application purpose:

• For walls, furniture, ceilings, load-bearing and enclosing structures made of wood
• To increase fire resistance

Characteristics:

• forms an ecological decorative coating;
• fire safety class KM1;
• ensures the preservation of the wood structure;
• easy to apply (for application, you can use a brush, roller or spray);
• one-component (ready to use);
• durable;
• moisture resistant;
• does not have a harmful effect on people;
• operating temperature from -40°С to +60°С.

Installation recommendations:

• the installation site is pre-cleaned of dust, dirt and wood shavings, if necessary, the surface is smoothed by an abrasive mechanical method;
• before use, the varnish is mixed;
• if necessary, the varnish is diluted with water to a working viscosity (not more than 5% by weight);
• applied at temperatures from +5°С to +30°С;
• 4-5 layers are applied to the surface (the approximate consumption is from 80 to 120 g / m);
• layers are dried for 2 hours.

Weight: 11 l (11 kg).

Application purpose:

• For walls, furniture, ceilings, load-bearing and enclosing structures made of wood
• To increase fire resistance

Characteristics:

• forms an ecological decorative coating;
• fire safety class KM1;
• ensures the preservation of the wood structure;
• easy to apply (for application, you can use a brush, roller or spray);
• one-component (ready to use);
• durable;
• moisture resistant;
• does not have a harmful effect on people;
• operating temperature from -40°С to +60°С.

Installation recommendations:

• the installation site is pre-cleaned of dust, dirt and wood shavings, if necessary, the surface is smoothed by an abrasive mechanical method;
• before use, the varnish is mixed;
• if necessary, the varnish is diluted with water to a working viscosity (not more than 5% by weight);
• applied at temperatures from +5°С to +30°С;
• 4-5 layers are applied to the surface (the approximate consumption is from 80 to 120 g / m);
• layers are dried for 2 hours.

Weight: 20 l (20 kg).

Application purpose:

• For walls, furniture, ceilings, load-bearing and enclosing structures made of wood
• To increase fire resistance

Characteristics:

• forms an ecological decorative coating;
• fire safety class KM1;
• ensures the preservation of the wood structure;
• easy to apply (for application, you can use a brush, roller or spray);
• one-component (ready to use);
• durable;
• moisture resistant;
• does not have a harmful effect on people;
• operating temperature from -40°С to +60°С.

Installation recommendations:

• the installation site is pre-cleaned of dust, dirt and wood shavings, if necessary, the surface is smoothed by an abrasive mechanical method;
• before use, the varnish is mixed;
• if necessary, the varnish is diluted with water to a working viscosity (not more than 5% by weight);
• applied at temperatures from +5°С to +30°С;
• 4-5 layers are applied to the surface (the approximate consumption is from 80 to 120 g / m);
• layers are dried for 2 hours.

Weight: 3 l (3 kg).

Application purpose:

• To protect wooden and metal surfaces, products and structures made of brick, concrete, wood and other materials from fire

Characteristics:

• fire safety class KM2;
• Can be used both inside buildings and outside;
• wear-resistant;
• color transparent or light brown;
• resistant to cold;
• weatherproof;
• glossy;
• one-component, which simplifies the use of varnish;
• fire-retardant properties are maintained for 10 years;
• can be used as a finishing material.

Recommendations for use:

• applied at temperatures from -25°С to +40°С;
• before application, the varnish must be mixed, and if necessary, diluted with a P-4 solvent - the working viscosity should be no more than 5% of the total mass;
• varnish is applied with a pneumatic sprayer or brush / roller;
• to achieve the fire safety class KM2, it is required to apply at least 4 layers of varnish;
• the approximate consumption for 1 layer is 60-70 g/m2.

Weight: 2.4 l (1.8 kg).