Application purpose:
- For mineral surfaces that are used indoors
- For surface treatment before using the paint "OGNEZA" KM0 - thanks to the primer, the mineral base is strengthened and the consumption of the finish coating is reduced
Characteristics:
- water-borne soil;
- well absorbed;
- increases surface adhesion;
- easy to apply;
- non-toxic;
- vapor permeable;
- reduces the absorbency of the substrate;
- resistant to cold;
- the primer is stored in a tightly closed PE container in a dry closed room (temperature from +5 to +40°C;
- a short-term decrease in temperature to -40 ° C is possible (no more than 5 freeze / thaw cycles for up to 6 hours are allowed);
- service life: 30 years (at temperatures from -50 to +80°C).
Installation recommendations:
- the surface before application is cleaned of fats, dirt, lubricating oils, etc., while cement laitance and unevenly holding areas of the base are removed;
- applied at temperatures from +5 to +35°C;
- the soil is thoroughly mixed before application;
- 1 or 2 layers are applied to the surface (depending on the type of surface, its dusting and porosity);
- the time required to dry the layer, 1 hour;
- approximate consumption is 180-220 g/m2.
Weight: 10 l.