Fire-resistant impregnations, varnishes and paints Ogneza

Application purpose:

• To protect wooden and metal surfaces, products and structures made of brick, concrete, wood and other materials from fire

Characteristics:

• fire safety class KM2;
• Can be used both inside buildings and outside;
• wear-resistant;
• color transparent or light brown;
• resistant to cold;
• weatherproof;
• glossy;
• one-component, which simplifies the use of varnish;
• fire-retardant properties are maintained for 10 years;
• can be used as a finishing material.

Recommendations for use:

• applied at temperatures from -25°С to +40°С;
• before application, the varnish must be mixed, and if necessary, diluted with a P-4 solvent - the working viscosity should be no more than 5% of the total mass;
• varnish is applied with a pneumatic sprayer or brush / roller;
• to achieve the fire safety class KM2, it is required to apply at least 4 layers of varnish;
• the approximate consumption for 1 layer is 60-70 g/m2.

Weight: 20 l (18 kg).

Application purpose:

• To protect wooden and metal surfaces, products and structures made of brick, concrete, wood and other materials from fire

Characteristics:

• fire safety class KM2;
• Can be used both inside buildings and outside;
• wear-resistant;
• color transparent or light brown;
• resistant to cold;
• weatherproof;
• matte;
• one-component, which simplifies the use of varnish;
• fire-retardant properties are maintained for 10 years;
• can be used as a finishing material.

Recommendations for use:

• applied at temperatures from -25°С to +40°С;
• before application, the varnish must be mixed, and if necessary, diluted with a P-4 solvent - the working viscosity should be no more than 5% of the total mass;
• varnish is applied with a pneumatic sprayer or brush / roller;
• to achieve the fire safety class KM2, it is required to apply at least 4 layers of varnish;
• the approximate consumption for 1 layer is 60-70 g/m2.

Weight: 2.4 L (1.8 kg).

Application purpose:

• To protect wooden and metal surfaces, products and structures made of brick, concrete, wood and other materials from fire

Characteristics:

• fire safety class KM2;
• Can be used both inside buildings and outside;
• wear-resistant;
• color transparent or light brown;
• resistant to cold;
• weatherproof;
• matte;
• one-component, which simplifies the use of varnish;
• fire-retardant properties are maintained for 10 years;
• can be used as a finishing material.

Recommendations for use:

• applied at temperatures from -25°С to +40°С;
• before application, the varnish must be mixed, and if necessary, diluted with a P-4 solvent - the working viscosity should be no more than 5% of the total mass;
• varnish is applied with a pneumatic sprayer or brush / roller;
• to achieve the fire safety class KM2, it is required to apply at least 4 layers of varnish;
• the approximate consumption for 1 layer is 60-70 g/m2.

Weight: 20 l (18 kg).

Application purpose:

• For fire protection and thermal insulation of chimneys
• For sealing flange connections of air ducts, as well as gaps in fireproof glazing of doors, facades, partitions
• For electrical insulation

Characteristics:

• very light, so the instructions do not become heavier;
• flexible;
• resistant to temperature extremes;
• safe;
• without adhesive layer;
• has low thermal conductivity;
• simple and easy to install;
• has low electrical conductivity;
• operating temperature from -130°C to +1260°C;
• warranty: 1 year from date of manufacture;
• coating service life: 30 years.

Size: 3*10 mm.

Roll length: 25 m.

Application purpose:

• For fire protection and thermal insulation of chimneys
• For sealing flange connections of air ducts, as well as gaps in fireproof glazing of doors, facades, partitions
• For electrical insulation

Characteristics:

• very light, so the instructions do not become heavier;
• flexible;
• resistant to temperature extremes;
• safe;
• without adhesive layer;
• has low thermal conductivity;
• simple and easy to install;
• has low electrical conductivity;
• operating temperature from -130°C to +1260°C;
• warranty: 1 year from date of manufacture;
• coating service life: 30 years.

Size: 3*15 mm.

Roll length: 25 m.

Application purpose:

• For fire protection and thermal insulation of chimneys
• For sealing flange connections of air ducts, as well as gaps in fireproof glazing of doors, facades, partitions
• For electrical insulation

Characteristics:

• very light, so the instructions do not become heavier;
• flexible;
• resistant to temperature extremes;
• safe;
• without adhesive layer;
• has low thermal conductivity;
• simple and easy to install;
• has low electrical conductivity;
• operating temperature from -130°C to +1260°C;
• warranty: 1 year from date of manufacture;
• coating service life: 30 years.

Size: 3*20 mm.

Roll length: 25 m.

Application purpose:

• For fire protection and thermal insulation of chimneys
• For sealing flange connections of air ducts, as well as gaps in fireproof glazing of doors, facades, partitions
• For electrical insulation

Characteristics:

• very light, so the instructions do not become heavier;
• flexible;
• resistant to temperature extremes;
• safe;
• without adhesive layer;
• has low thermal conductivity;
• simple and easy to install;
• has low electrical conductivity;
• operating temperature from -130°C to +1260°C;
• warranty: 1 year from date of manufacture;
• coating service life: 30 years.

Size: 3*30 mm.

Roll length: 25 m.

Application purpose:

• For fire protection and thermal insulation of chimneys
• For sealing flange connections of air ducts, as well as gaps in fireproof glazing of doors, facades, partitions
• For electrical insulation

Characteristics:

• very light, so the instructions do not become heavier;
• flexible;
• resistant to temperature extremes;
• safe;
• there is an adhesive layer;
• has low thermal conductivity;
• simple and easy to install;
• has low electrical conductivity;
• operating temperature from -130°C to +1260°C;
• warranty: 1 year from date of manufacture;
• coating service life: 30 years.

Size: 3*10 mm.

Roll length: 25 m.

Application purpose:

• For fire protection and thermal insulation of chimneys
• For sealing flange connections of air ducts, as well as gaps in fireproof glazing of doors, facades, partitions
• For electrical insulation

Characteristics:

• very light, so the instructions do not become heavier;
• flexible;
• resistant to temperature extremes;
• safe;
• there is an adhesive layer;
• has low thermal conductivity;
• simple and easy to install;
• has low electrical conductivity;
• operating temperature from -130°C to +1260°C;
• warranty: 1 year from date of manufacture;
• coating service life: 30 years.

Size: 3*15 mm.

Roll length: 25 m.

Application purpose:

• For fire protection and thermal insulation of chimneys
• For sealing flange connections of air ducts, as well as gaps in fireproof glazing of doors, facades, partitions
• For electrical insulation

Characteristics:

• very light, so the instructions do not become heavier;
• flexible;
• resistant to temperature extremes;
• safe;
• there is an adhesive layer;
• has low thermal conductivity;
• simple and easy to install;
• has low electrical conductivity;
• operating temperature from -130°C to +1260°C;
• warranty: 1 year from date of manufacture;
• coating service life: 30 years.

Size: 3*20 mm.

Roll length: 25 m.

Application purpose:

• For fire protection and thermal insulation of chimneys
• For sealing flange connections of air ducts, as well as gaps in fireproof glazing of doors, facades, partitions
• For electrical insulation

Characteristics:

• very light, so the instructions do not become heavier;
• flexible;
• resistant to temperature extremes;
• safe;
• there is an adhesive layer;
• has low thermal conductivity;
• simple and easy to install;
• has low electrical conductivity;
• operating temperature from -130°C to +1260°C;
• warranty: 1 year from date of manufacture;
• coating service life: 30 years.

Size: 3*30 mm.

Roll length: 25 m.

Application purpose:

• Fireproof bituminous/acrylic waterproofing layer
• For the perimeter of smoke ventilation systems
• For access to escape routes
• For fire belts

Characteristics:

• fire safety class: KM0;
• operating temperature from -40 to +60 °С;
• elastic;
• non-combustible;
• application at sub-zero temperatures is possible;
• good adhesion to the substrate;
• durable;
• there are vibration isolation properties;
• easy to apply;
• non-toxic;
• stored for 6 months from the date of manufacture (if the package has not been opened);
• coating service life: not less than 15 years.

Installation recommendations:

• mastic is completely ready for use;
• thoroughly mixed before application (if necessary, with a construction mixer);
• the surface is thoroughly cleaned from dust, paint, dirt, etc. before application. To clean the top layer, a brush, vacuum cleaner or compressed air is used. There must be no visible condensation or water on the surface;
• applied at temperatures from -20 to +40 °C;
• average consumption of mastic per layer (thickness 3 mm): 4 kg/m2;
• the interlayer drying time (at a temperature of about +20 °C) is 24 hours.

Compatible with the following roofing materials:

• TechnoNIKOL Uniflex;
• Stekloizol R HKP gray slate;
• TechnoNIKOL Bikroelast EKP;
• TechnoNIKOL Linocrom TKP;
• TechnoNIKOL Technoelast EKP;
• TechnoNIKOL Uniflex K HKP gray slate;
• ICOPAL B;
• Isoelast;
• Isoplast K;
• Acrylic waterproofing Bitumast (liquid).

Weight: 20 kg.

Application purpose:

• To protect structures and wood products both inside and outside buildings (without direct precipitation and contact with the ground)
• To protect the tree from malicious agents
• To prevent the outbreak and subsequent spread of fire

Characteristics:

• salt and alkaline stains are not formed on the treated surface;
• subsequent coating with any decorative composition is possible;
• the structure of the tree does not change;
• transparent color.

Operating principle:

Wood treated with impregnation becomes slow-burning, so that wood resists fire longer. Service life (while maintaining the composition): at least 15 years.

Recommendations for use:

• dry impregnation is diluted in water in proportions of 1: 4;
• impregnation is applied at temperatures from +5°С to +40°С;
• the wood must first be prepared - it must be cleaned of dirt, grease and dust, there should be no visible resin inclusions on the surface, the side surfaces must be cut off, the ends must be sawn off;
• impregnation can be applied with a roller, brush or spray device;
• for impregnation, the material can be immersed in the composition for 30-60 minutes.

Weight: 25 kg.

Application purpose:

• For fire protection of wooden products, as well as wooden structures not intended for decorative finishing

Characteristics:

• high degree of fire protection;
• the structure of the tree does not change;
• can be used both for primary processing of wood, and for structures that have previously been subjected to fire retardant treatment;
• profitable price.

Operating principle:

It swells under the influence of fire, which creates a heat-insulating layer of foam coke. Wood products and structures treated with impregnation resist flame longer. Service life (if the coating is preserved): 15 years.

Recommendations for use:

• diluted in water in a ratio of 1:3;
• use temperature from +5 ºС to +40 ºС;
• the pre-treated surface is prepared;
• applied with a roller, brush or spray device;
• the composition is applied abundantly and evenly;
• stored at temperatures from -60 ºС to +80 ºС.

Weight: 25 kg.

Application purpose:

• For fire protection of wooden products, as well as wooden structures not intended for decorative finishing

Characteristics:

• high degree of fire protection;
• the structure of the tree does not change;
• can be used both for primary processing of wood, and for structures that have previously been subjected to fire retardant treatment;
• profitable price.

Operating principle:

It swells under the influence of fire, which creates a heat-insulating layer of foam coke. Wood products and structures treated with impregnation resist flame longer. Service life (if the coating is preserved): 15 years.

Recommendations for use:

• use temperature from +5 ºС to +40 ºС;
• the pre-treated surface is prepared;
• applied with a roller, brush or spray device;
• the composition is applied abundantly and evenly;
• stored at temperatures from -60 ºС to +80 ºС.

Weight: 10 l/12 kg.

Application purpose:

• To protect structures and wood products both inside and outside buildings (without direct precipitation and contact with the ground)
• To protect the tree from malicious agents
• To prevent the outbreak and subsequent spread of fire

Characteristics:

• salt and alkaline stains are not formed on the treated surface;
• subsequent coating with any decorative composition is possible;
• the structure of the tree does not change;
• transparent color.

Operating principle:

Wood treated with impregnation becomes slow-burning, so that wood resists fire longer. Service life (while maintaining the composition): at least 15 years.

Recommendations for use:

• impregnation is applied at temperatures from +5°С to +40°С;
• the wood must first be prepared - it must be cleaned of dirt, grease and dust, there should be no visible resin inclusions on the surface, the side surfaces must be cut off, the ends must be sawn off;
• impregnation can be applied with a roller, brush or spray device;
• for impregnation, the material can be immersed in the composition for 30-60 minutes.

Weight: 10 l/12 kg.

Application purpose:

• To protect structures and wood products both inside and outside buildings (without direct precipitation and contact with the ground)
• To protect the tree from malicious agents
• To prevent the outbreak and subsequent spread of fire

Characteristics:

• salt and alkaline stains are not formed on the treated surface;
• subsequent coating with any decorative composition is possible;
• the structure of the tree does not change;
• impregnation dyed red.

Operating principle:

Wood treated with impregnation becomes slow-burning, so that wood resists fire longer. Service life (while maintaining the composition): at least 15 years.

Recommendations for use:

• impregnation is applied at temperatures from +5°С to +40°С;
• the wood must first be prepared - it must be cleaned of dirt, grease and dust, there should be no visible resin inclusions on the surface, the side surfaces must be cut off, the ends must be sawn off;
• impregnation can be applied with a roller, brush or spray device;
• for impregnation, the material can be immersed in the composition for 30-60 minutes.

Weight: 10 l/12 k.

Application purpose:

• To protect structures and wood products both inside and outside buildings (without direct precipitation and contact with the ground)
• To protect the tree from malicious agents
• To prevent the outbreak and subsequent spread of fire

Characteristics:

• salt and alkaline stains are not formed on the treated surface;
• subsequent coating with any decorative composition is possible;
• the structure of the tree does not change;
• there is a color indicator (red).

Operating principle:

Wood treated with impregnation becomes slow-burning, so that wood resists fire longer. Service life (while maintaining the composition): at least 15 years.

Recommendations for use:

• impregnation is applied at temperatures from +5°С to +40°С;
• the wood must first be prepared - it must be cleaned of dirt, grease and dust, there should be no visible resin inclusions on the surface, the side surfaces must be cut off, the ends must be sawn off;
• impregnation can be applied with a roller, brush or spray device;
• for impregnation, the material can be immersed in the composition for 30-60 minutes.

Weight: 10 l/12 kg.

Application purpose:

• For fire protection of fabrics and carpets

Characteristics:

• does not form salt and alkali stains;
• high fire retardant properties;
• easy to apply;
• impregnation is not toxic;
• does not impart stickiness to the processed material.

Operating principle:

The impregnated fabric becomes flame retardant, so that in case of fire it resists the effects of fire longer.

Recommendations for use:

• ambient temperature during impregnation application: from +5 ºС to +35 ºС;
• the pre-treated surface is cleaned of dirt, dust and grease;
• applied by dipping or spraying;
• stored at temperatures from +5 ºС to +40 ºС.

Weight: 10 l / 12 kg.

Application purpose:

• For fire protection of fabrics and carpets

Characteristics:

• does not form salt and alkali stains;
• high fire retardant properties;
• easy to apply;
• impregnation is not toxic;
• does not impart stickiness to the processed material.

Operating principle:

The impregnated fabric becomes flame retardant, so that in case of fire it resists the effects of fire longer.

Recommendations for use:

• diluted in a ratio of 1:3;
• the temperature of the water in which the agent is diluted must be at least +15 ºС;
• the pre-treated surface is cleaned of dirt, dust and grease;
• applied by dipping or spraying;
• stored at temperatures from -60 ºС to +80 ºС.

Weight: 25 kg.