Article: 1r0066
Application purpose:
- For fire protection of wooden structures
- For indoor spaces
Characteristics:
- adhesion 1 point;
- paint is easy to apply with a brush, roller or spray;
- non-toxic;
- white;
- after drying, a film with a matte surface is formed;
- operating temperature from -40 to +60 °С;
- coating is finally formed in no more than 7 days.
Recommendations for use:
- the wood is pre-treated with a compatible antiseptic - to check compatibility, Ogneza paint is applied to the wood treated with an antiseptic for 1-2 hours, if after this time the paint lies in an even layer, then the antiseptic is compatible with the paint;
- paint is applied in 2-4 layers with a roller, brush or in bulk;
- after each layer, intermediate drying is necessary for 3-8 hours at a temperature of +20 (± 2) °С;
- before application, the paint is thoroughly mixed, if necessary, it should be diluted with water (viscosity level should not exceed 5% of the total mass);
- approximate consumption: 0.52 kg / m2 to achieve I group PB, 0.3 kg / m2 - for group II.
Weight: 3 kg.