Logo
Ru| En
Loading

Condensate traps of Hutterer & Lechner

Condensate water arises when the use of air conditioners and it should remove into the house sewerage system. You must use the special traps for this.

Condensate traps of Hutterer and Lechner have the following advantages:

  • Self-cleaning. When condensate removes from air conditioners in the house sewerage system, trap does not self-clean. The HL Company reduced diameter of the outlet for achievement of self-cleaning effect, and it recommends skew of 0.1 for improving capabilities of self-purification;
  • Protection against sewerage smells. HL traps for air conditioners have a special design that protects the room against sewer gases - they not only have unpleasant smell but also dangerous. For example, the company produces traps for air conditioners with a water seal with great depth and a special device which is not transmitting smell in the room;
  • Ease of maintenance. Service HL traps for air conditioners is not different from the service traps for sinks. Exception is the trap HL 138 - it is designed for flush mounting and it is equipped with a special cartridge, which is removed and washed or replaced when its contamination.

Additionally the company produces the traps for air conditioners with strong pressure difference, which remains in operation both at negative pressure, and at an overpressure.

Photo Name Article Price
Hutterer & Lechner 2 x Gasket for cartridge of HL138, d 15-22mm [Code number: HL 01097D]
Details
HL 01097D 455 rub

Application area:

  • For replaceable cassette siphon
  • For HL138

Characteristics:

  • Material: NK / SBR60

Size: 15 - 22 mm.

Weight: 0.05 kg.

 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
35 35 35 0,07 0,000042875
Hutterer & Lechner Condensate trap, hoizontal, with transparent dip-tubes and refill-facility, DN40 [Code number: HL 136.2]
Details
HL 136.2 4 011 rub

Condensate trap HL 136.2 is made of polypropylene. The trap is manufactured by the Hutterer Lechner Company, preferably for air conditioners etc. Height of water seal is 140-320 mm. Dip-tubes is made of transparent material that you allows to monitor status of the water seal. Condensate trap can be connected to a washing machine or dishwasher. With a non return valve. With horizontal inlet DN40 and locking nut 6/4". Weight of the trap is 364 gramms.

Diameter Material Weight
DN, mm   gr
40 polypropylene 364

Download data sheet: HL 136.2 Condensate trap HL 136.2

Hutterer & Lechner Condensate trap with trap seal and rising ball backwater stop, DN40 [Code number: HL 136.3] (Russia)
Details
HL 136.3 4 506 rub

Condensate trap HL 136.3 is made of polypropylene. Capacity is 0,37 l/s. The trap is manufactured by the Hutterer Lechner Company, preferably for air conditioners etc. With a trap seal, rising ball backwater stop and cleaning eye/tray. With DN40 and vertical inlet 1 1/4'. Weight of the trap is 230 gramms.

Diameter Material Capacity Weight
DN, mm   l/s gr
40 polypropylene 0,37 230

Download data sheet: HL 136.3 Condensate trap HL 136.3

Hutterer & Lechner Condensate trap with trap seal and rising ball backwater stop, vertical or horizontal, DN40 x 1 1/4' or d 12–18mm [Code number: HL 136N] (Russia)
Details
HL136N 4 506 rub

Application purpose:

  • For draining condensate from air conditioners, fan coil units and air handling units

Characteristics:

  • there is a mechanical odor locking device;
  • there is a water seal (height 60 mm);
  • entrance horizontal or vertical;
  • release type: horizontal;
  • throughput: 0.37 l / s;
  • operation is possible at temperatures from 0°С to +100°С;
  • warranty period: 1 year;
  • service life: 50 years.

Equipment:

  • body;
  • sealing nut (size 5/4");
  • cleaning;
  • elbow with a diameter of 32 mm.

Produced in Russia.

Mounting example

Technical characteristics

Diameter Material Weight
DN, mm   gr
40 polypropylene 230

Documentation

Download data sheet: HL 136N Condensate trap HL 136N

Hutterer & Lechner Transparent condensate trap with trap seal, vertical or horizontal, DN40 x 1 1/4' or d 12–18mm [Code number: HL 136NT]
Details
HL 136NT 6 525 rub

Transparent condensate trap HL 136NT is made of PP transpartent. The trap is manufactured by the Hutterer Lechner Company, preferably for air conditioners, funnels etc. With a water trap seal (60 mm), rising ball backwater stop and cleaning eye/tray. Weight of the trap is 230 gramms.

Diameter Material Weight
DN, mm   gr
DN40 x 1 1/4' PP transpartent 230

Download data sheet: HL 136NT Transparent condensate trap HL 136NT

(ARTICLE IS REPLACED BY HL 138N) - Hutterer & Lechner In-wall siphon for condensate water for air conditioners [Code number: HL 138] (Russia)
Details
HL138 4 354 rub

Application purpose:

  • For drainage from air conditioners

Characteristics:

  • there is a mechanical odor locking device;
  • there is a water seal (height 50 mm);
  • the size of the siphon intake hole is 20-32 mm;
  • mounted at a vertical distance of at least 200 mm (but not more than 3.5 m) from the outlet pipe of the air conditioner;
  • warranty period: 1 year;
  • service life: 50 years.

Equipment:

  • case (made of PP, equipped with a sealing rubber nozzle) 100x100x60 mm in size;
  • removable transparent cassette;
  • red construction plug (made of PP) that can be cut to size;
  • white decorative cover measuring 110x110 mm (there are spring clips for fastening);
  • instruction.

Produced in Russia.

Mounting example

Diameter Material Capacity Weight
DN, mm   l/s gr
32 PP/ABS 0,15 280

Download example of use: HL 138 In-wall siphon HL 138

(ARTICLE HAS BEEN REPLACED BY HL 138NH) - Hutterer & Lechner In-wall siphon for condensate water with hygienic adapter, vertical, DN 32 [Code number: HL 138H]
Details
HL 138H 7 669 rub

In-wall siphon for diversion of drainage water to sewer system. It is suitable for technological (production) equipment, air conditioners, fancoils and other equipments with jet break which are installed in public health institutions and public catering. It does not miss odors when water seal dries up, the siphon-cassette is taken out. The inlet pipe connection is DN 20-32 mm (inner diameter is 18 mm). Mounting protection is cut in place. The minimum depth of installation is 60 mm.

Diameter Material Capacity Цeight
DN, mm   l/s kg
32 PP/ABS 0,02 0,3
 
Packaging data (carton, 10 pcs)
Height Width Depth Weight Volume
mm mm mm kg m3
320 250 410 3,461 0,0328

Download data sheet: HL 138H In-wall siphon HL 138H

Hutterer Lechner Flush mounted stench trap for air condition condenstate water for drainage of condensate water to the sewer, DN 32 [Артикул: HL 138N]
Details
HL 138N 4 354 rub

Flush mounted stench trap for drainage discharge from air conditioners, intake opening 20 - 32 mm. There is a new decorative cover 120x120 mm, which is attached to the housing or mounting protection using 4 legs. The minimum installation depth is 60 mm.

Diameter Material Capacity Цeight
DN, mm   l/h kg
32 PP 120 0,266
 
Packaging data (carton, 10 pcs)
Height Width Depth Weight Volume
mm mm mm kg m3
320 250 410 3,005 0,032800000

Download example of use: HL 138N In-wall siphon HL 138N

Hutterer Lechner Flush mounted stench hygienic trap for air condition condenstate water for drainage of condensate water to the sewer, DN 32 [Артикул: HL 138NH]
Details
HL 138NH 7 669 rub

Flush mounted stench hygienic trap with a special adapter designed to drain into the sewer network from technological (production) equipment, air conditioners, fan coils, etc., installed in buildings for various purposes, including in healthcare institutions, catering facilities and ensuring hygienic requirements as in case of jet rupture in accordance with the requirements of SP 30.13330-2020 and SP 2.3.6.1079-01. There is a new decorative cover 120x120 mm, which is fixed in the housing or mounting protection using 4 legs.

Diameter Material Capacity Цeight
DN, mm   l/h kg
32 PP 72 0,286
 
Packaging data (carton, 10 pcs)
Height Width Depth Weight Volume
mm mm mm kg m3
320 250 410 3,205 0,032800000

Download example of use: HL 138NH In-wall siphon HL 138NH

Hutterer & Lechner Drip funnel, with trap seal, DN32 [Code number: HL 21] (Russia)
Details
HL21 2 318 rub

Application purpose:

  • For draining condensate from air conditioners or fan coil units
  • For the removal of hot water from storage water heaters, if the safety valves of the safety groups have tripped
  • For diverting wastewater with jet break

Characteristics:

  • there is a water seal (height 60 mm);
  • equipped with a mechanical odor locking device;
  • operation is possible at temperatures from 0°С to +100°С;
  • warranty period: 1 year;
  • service life: 50 years.

Produced in Russia.

Схема монтажа капельной воронки HL21

Technical characteristics

Diameter Material Capacity Weight
DN, mm   l/s gr
32 polypropylene 0,17 90

Download data sheet: HL 21 Drip funnel HL 21

Hutterer & Lechner Drip funnel with pipe clip, 1 1/2' [Code number: HL 20]
Details
HL 20 2 339 rub

Drip funnel HL 20 is used on air conditioners and manufactured by Hutterer Lechner. It can take water with jet break. Size of drip funnel is 170*92 mm. The drip funnel is made of polypropylene, its weight of 115 grams. With female thread 6/4". Also drip funnel is equipped with a pipe clip.

Diameter Material Weight
inch   gr
6/4" polypropylene 115

Download data sheet: HL 20 Drip funnel HL 20

Hutterer & Lechner Cover plate for HL 138 [Code number: HL 0138.2E] (Russia)
Details
HL 0138.2E 716 rub

Application area:

  • For air condition and ventilation

Characteristics:

  • Material: ABS (PS)

Weight: 0,03 kg

Hutterer & Lechner Lip seal for HL 136N [Code number: HL 01088D]
Details
HL 01088D 890 rub

Characteristics of HL sewage equipment:

  • Complies with ISO 9001
  • Safety for ecology and health
  • Products undergo laboratory testing
  • Durability
  • Attractive appearance
Suitable for Weight
  kg/pc
HL 136N 0,001

See also