Logo
Ru| En

Viking Johnson AquaFast couplings

Home→ Catalog→ Viking Johnson→ AquaFast→ Couplings

Viking Johnson AquaFast couplings are used in the installation of polyethylene and PVC pipes. They are made of ductile cast iron.

Main advantages:

  • improved design due to which the coupling is easily installed on oval and spiral pipes;
  • updated gripping mechanism that facilitates installation;
  • sealing the connection at three points provides a reliable and maximum tight connection;
  • can be used for installation of small diameter sewer pipelines;
  • analysis during installation is not required - the coupling just needs to be moved to the necessary place, after which the bolts should be tightened;
  • suitable for repair work on existing pipelines;
  • comes with an EPDM seal sleeve that is suitable for use in drinking water pipelines;
  • corrosion resistance - the coupling body is coated with Rilsan Nylon 11, Sheraplex is coated on bolts and nuts in accordance with WIS 4-52-03, which provides long-term protection against corrosion, impact and wear;
  • the sleeve can be used to connect PE80/PE100 pipes and metric PVC pipes and is ideal for PE/PVC intermediate joints.
Photo Name Article Price
Photo Draft
Photo Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 110 mm [Code number: AF110/1] Draft Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 110 mm [Code number: AF110/1]
Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 110 mm [Code number: AF110/1]
Details 		AF110/1 23 000 rub

Application purpose:

  • For joining pipes from PE and PVC in various combinations
  • For neutral liquids at permissible operating temperature + 50 °С

Characteristics:

  • Operating pressure up to 16 bar
  • One type of sleeve for PE and PVC pipes
  • No additional support for PE pipes required
  • No torque wrench required - bolts tighten to stop
  • The gap between the ends of the pipes is necessary for: compensating for thermal expansion, preventing the transmission of vibration, compensating for soil precipitation and facilitating installation/disassembly

Installation:

  • Before installation, make sure that the outer diameters of the pipes are within the range of adjustment of the coupling
  • Pipes are inserted into a freely assembled coupling, while providing a gap between the ends of the pipes of 20 mm (chamfering is not required)
  • Bolts of clamping rings are tightened all the way

Materials:

  • Central adapter, pressure ring and housing: Ductile iron in accordance with BS EN 1563:1997
  • Locking ring: Zinc alloy in accordance with BS EN 12844:1999
  • Intermediate ring: Malleable cast iron in accordance with BS EN 1563:1997
  • Bolts: stainless steel BS EN ISO3506-1: 2009 Grade A2ORA4
  • Nuts: stainless steel BS EN ISO3506-2: 2009 Grade A2ORA4
  • Sealing collar: EPDM

Coatings:

  • Center adapter, pressure ring, and intermediate ring: Rilsan Nylon 11
  • Locking ring: cataphoretic coating
  • Bolts, nuts: Sheraplex conforming to WIS 4-52-03
Outer diameter of the pipe Number of bolts, diam. x length A max. B dia. Landing clearance Max clearance Weight
mm mm mm mm mm mm kg
110 2-M12 x 250 257 190,5 20 30 4,7
Photo Draft
Photo Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 125 mm [Code number: AF125/1] Draft Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 125 mm [Code number: AF125/1]
Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 125 mm [Code number: AF125/1]
Details 		AF125/1

Application purpose:

  • For joining pipes from PE and PVC in various combinations
  • For neutral liquids at permissible operating temperature + 50 °С

Characteristics:

  • Operating pressure up to 16 bar
  • One type of sleeve for PE and PVC pipes
  • No additional support for PE pipes required
  • No torque wrench required - bolts tighten to stop
  • The gap between the ends of the pipes is necessary for: compensating for thermal expansion, preventing the transmission of vibration, compensating for soil precipitation and facilitating installation/disassembly

Installation:

  • Before installation, make sure that the outer diameters of the pipes are within the range of adjustment of the coupling
  • Pipes are inserted into a freely assembled coupling, while providing a gap between the ends of the pipes of 20 mm (chamfering is not required)
  • Bolts of clamping rings are tightened all the way

Materials:

  • Central adapter, pressure ring and housing: Ductile iron in accordance with BS EN 1563:1997
  • Locking ring: Zinc alloy in accordance with BS EN 12844:1999
  • Intermediate ring: Malleable cast iron in accordance with BS EN 1563:1997
  • Bolts: stainless steel BS EN ISO3506-1: 2009 Grade A2ORA4
  • Nuts: stainless steel BS EN ISO3506-2: 2009 Grade A2ORA4
  • Sealing collar: EPDM

Coatings:

  • Center adapter, pressure ring, and intermediate ring: Rilsan Nylon 11
  • Locking ring: cataphoretic coating
  • Bolts, nuts: Sheraplex conforming to WIS 4-52-03
Outer diameter of the pipe Number of bolts, diam. x length A max. B dia. Landing clearance Max clearance Weight
mm mm mm mm mm mm kg
125 2-M12 x 250 257 207 20 30 5,2
Photo Draft
Photo Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 140 mm [Code number: AF140/1] Draft Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 140 mm [Code number: AF140/1]
Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 140 mm [Code number: AF140/1]
Details 		AF140/1

Application purpose:

  • For joining pipes from PE and PVC in various combinations
  • For neutral liquids at permissible operating temperature + 50 °С

Characteristics:

  • Operating pressure up to 16 bar
  • One type of sleeve for PE and PVC pipes
  • No additional support for PE pipes required
  • No torque wrench required - bolts tighten to stop
  • The gap between the ends of the pipes is necessary for: compensating for thermal expansion, preventing the transmission of vibration, compensating for soil precipitation and facilitating installation/disassembly

Installation:

  • Before installation, make sure that the outer diameters of the pipes are within the range of adjustment of the coupling
  • Pipes are inserted into a freely assembled coupling, while providing a gap between the ends of the pipes of 20 mm (chamfering is not required)
  • Bolts of clamping rings are tightened all the way

Materials:

  • Central adapter, pressure ring and housing: Ductile iron in accordance with BS EN 1563:1997
  • Locking ring: Zinc alloy in accordance with BS EN 12844:1999
  • Intermediate ring: Malleable cast iron in accordance with BS EN 1563:1997
  • Bolts: stainless steel BS EN ISO3506-1: 2009 Grade A2ORA4
  • Nuts: stainless steel BS EN ISO3506-2: 2009 Grade A2ORA4
  • Sealing collar: EPDM

Coatings:

  • Center adapter, pressure ring, and intermediate ring: Rilsan Nylon 11
  • Locking ring: cataphoretic coating
  • Bolts, nuts: Sheraplex conforming to WIS 4-52-03
Outer diameter of the pipe Number of bolts, diam. x length A max. B dia. Landing clearance Max clearance Weight
mm mm mm mm mm mm kg
140 4-M12 x 250 257 222 20 30 6,2
Photo Draft
Photo Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 150 mm [Code number: AF150/1] Draft Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 150 mm [Code number: AF150/1]
Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 150 mm [Code number: AF150/1]
Details 		AF150/1

Application purpose:

  • For joining pipes from PE and PVC in various combinations
  • For neutral liquids at permissible operating temperature + 50 °С

Characteristics:

  • Operating pressure up to 16 bar
  • One type of sleeve for PE and PVC pipes
  • No additional support for PE pipes required
  • No torque wrench required - bolts tighten to stop
  • The gap between the ends of the pipes is necessary for: compensating for thermal expansion, preventing the transmission of vibration, compensating for soil precipitation and facilitating installation/disassembly

Installation:

  • Before installation, make sure that the outer diameters of the pipes are within the range of adjustment of the coupling
  • Pipes are inserted into a freely assembled coupling, while providing a gap between the ends of the pipes of 20 mm (chamfering is not required)
  • Bolts of clamping rings are tightened all the way

Materials:

  • Central adapter, pressure ring and housing: Ductile iron in accordance with BS EN 1563:1997
  • Locking ring: Zinc alloy in accordance with BS EN 12844:1999
  • Intermediate ring: Malleable cast iron in accordance with BS EN 1563:1997
  • Bolts: stainless steel BS EN ISO3506-1: 2009 Grade A2ORA4
  • Nuts: stainless steel BS EN ISO3506-2: 2009 Grade A2ORA4
  • Sealing collar: EPDM

Coatings:

  • Center adapter, pressure ring, and intermediate ring: Rilsan Nylon 11
  • Locking ring: cataphoretic coating
  • Bolts, nuts: Sheraplex conforming to WIS 4-52-03
Outer diameter of the pipe Number of bolts, diam. x length A max. B dia. Landing clearance Max clearance Weight
mm mm mm mm mm mm kg
160 4-M12 x 250 257 242 20 30 9,5
Photo Draft
Photo Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 180 mm [Code number: AF180/1] Draft Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 180 mm [Code number: AF180/1]
Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 180 mm [Code number: AF180/1]
Details 		AF180/1

Application purpose:

  • For joining pipes from PE and PVC in various combinations
  • For neutral liquids at permissible operating temperature + 50 °С

Characteristics:

  • Operating pressure up to 16 bar
  • One type of sleeve for PE and PVC pipes
  • No additional support for PE pipes required
  • No torque wrench required - bolts tighten to stop
  • The gap between the ends of the pipes is necessary for: compensating for thermal expansion, preventing the transmission of vibration, compensating for soil precipitation and facilitating installation/disassembly

Installation:

  • Before installation, make sure that the outer diameters of the pipes are within the range of adjustment of the coupling
  • Pipes are inserted into a freely assembled coupling, while providing a gap between the ends of the pipes of 20 mm (chamfering is not required)
  • Bolts of clamping rings are tightened all the way

Materials:

  • Central adapter, pressure ring and housing: Ductile iron in accordance with BS EN 1563:1997
  • Locking ring: Zinc alloy in accordance with BS EN 12844:1999
  • Intermediate ring: aluminum alloy 6063 state T6
  • Bolts: stainless steel BS EN ISO3506-1: 2009 Grade A2ORA4
  • Nuts: stainless steel BS EN ISO3506-2: 2009 Grade A2ORA4
  • Sealing collar: EPDM

Coatings:

  • Center adapter, pressure ring, and intermediate ring: Rilsan Nylon 11
  • Locking ring: cataphoretic coating
  • Bolts, nuts: Sheraplex conforming to WIS 4-52-03
Outer diameter of the pipe Number of bolts, diam. x length A max. B dia. Landing clearance Max clearance Weight
mm mm mm mm mm mm kg
180 4-M12 x 375 382 264 30 50 13,6
Photo Draft
Photo Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 200 mm [Code number: AF200/1] Draft Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 200 mm [Code number: AF200/1]
Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 200 mm [Code number: AF200/1]
Details 		AF200/1

Application purpose:

  • For joining pipes from PE and PVC in various combinations
  • For neutral liquids at permissible operating temperature + 50 °С

Characteristics:

  • Operating pressure up to 16 bar
  • One type of sleeve for PE and PVC pipes
  • No additional support for PE pipes required
  • No torque wrench required - bolts tighten to stop
  • The gap between the ends of the pipes is necessary for: compensating for thermal expansion, preventing the transmission of vibration, compensating for soil precipitation and facilitating installation/disassembly

Installation:

  • Before installation, make sure that the outer diameters of the pipes are within the range of adjustment of the coupling
  • Pipes are inserted into a freely assembled coupling, while providing a gap between the ends of the pipes of 20 mm (chamfering is not required)
  • Bolts of clamping rings are tightened all the way

Materials:

  • Central adapter, pressure ring and housing: Ductile iron in accordance with BS EN 1563:1997
  • Locking ring: Zinc alloy in accordance with BS EN 12844:1999
  • Intermediate ring: aluminum alloy 6063 state T6
  • Bolts: stainless steel BS EN ISO3506-1: 2009 Grade A2ORA4
  • Nuts: stainless steel BS EN ISO3506-2: 2009 Grade A2ORA4
  • Sealing collar: EPDM

Coatings:

  • Center adapter, pressure ring, and intermediate ring: Rilsan Nylon 11
  • Locking ring: cataphoretic coating
  • Bolts, nuts: Sheraplex conforming to WIS 4-52-03
Outer diameter of the pipe Number of bolts, diam. x length A max. B dia. Landing clearance Max clearance Weight
mm mm mm mm mm mm kg
200 4-M12 x 375 382 292 30 50 14,8
Photo Draft
Photo Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 225 mm [Code number: AF225/1] Draft Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 225 mm [Code number: AF225/1]
Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 225 mm [Code number: AF225/1]
Details 		AF225/1 61 200 rub

Application purpose:

  • For joining pipes from PE and PVC in various combinations
  • For neutral liquids at permissible operating temperature + 50 °С

Characteristics:

  • Operating pressure up to 16 bar
  • One type of sleeve for PE and PVC pipes
  • No additional support for PE pipes required
  • No torque wrench required - bolts tighten to stop
  • The gap between the ends of the pipes is necessary for: compensating for thermal expansion, preventing the transmission of vibration, compensating for soil precipitation and facilitating installation/disassembly

Installation:

  • Before installation, make sure that the outer diameters of the pipes are within the range of adjustment of the coupling
  • Pipes are inserted into a freely assembled coupling, while providing a gap between the ends of the pipes of 20 mm (chamfering is not required)
  • Bolts of clamping rings are tightened all the way

Materials:

  • Central adapter, pressure ring and housing: Ductile iron in accordance with BS EN 1563:1997
  • Locking ring: Zinc alloy in accordance with BS EN 12844:1999
  • Intermediate ring: aluminum alloy 6063 state T6
  • Bolts: stainless steel BS EN ISO3506-1: 2009 Grade A2ORA4
  • Nuts: stainless steel BS EN ISO3506-2: 2009 Grade A2ORA4
  • Sealing collar: EPDM

Coatings:

  • Center adapter, pressure ring, and intermediate ring: Rilsan Nylon 11
  • Locking ring: cataphoretic coating
  • Bolts, nuts: Sheraplex conforming to WIS 4-52-03
Outer diameter of the pipe Number of bolts, diam. x length A max. B dia. Landing clearance Max clearance Weight
mm mm mm mm mm mm kg
225 4-M16 x 385 395 323 30 50 18,4
Photo Draft
Photo Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 250 mm [Code number: AF250/1] Draft Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 250 mm [Code number: AF250/1]
Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 250 mm [Code number: AF250/1]
Details 		AF250/1

Application purpose:

  • For joining pipes from PE and PVC in various combinations
  • For neutral liquids at permissible operating temperature + 50 °С

Characteristics:

  • Operating pressure up to 16 bar
  • One type of sleeve for PE and PVC pipes
  • No additional support for PE pipes required
  • No torque wrench required - bolts tighten to stop
  • The gap between the ends of the pipes is necessary for: compensating for thermal expansion, preventing the transmission of vibration, compensating for soil precipitation and facilitating installation/disassembly

Installation:

  • Before installation, make sure that the outer diameters of the pipes are within the range of adjustment of the coupling
  • Pipes are inserted into a freely assembled coupling, while providing a gap between the ends of the pipes of 20 mm (chamfering is not required)
  • Bolts of clamping rings are tightened all the way

Materials:

  • Central adapter, pressure ring and housing: Ductile iron in accordance with BS EN 1563:1997
  • Locking ring: Zinc alloy in accordance with BS EN 12844:1999
  • Intermediate ring: aluminum alloy 6063 state T6
  • Bolts: stainless steel BS EN ISO3506-1: 2009 Grade A2ORA4
  • Nuts: stainless steel BS EN ISO3506-2: 2009 Grade A2ORA4
  • Sealing collar: EPDM

Coatings:

  • Center adapter, pressure ring, and intermediate ring: Rilsan Nylon 11
  • Locking ring: cataphoretic coating
  • Bolts, nuts: Sheraplex conforming to WIS 4-52-03
Outer diameter of the pipe Number of bolts, diam. x length A max. B dia. Landing clearance Max clearance Weight
mm mm mm mm mm mm kg
250 6-M16 x 385 395 351 30 50 24,1
Photo Draft
Photo Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 280 mm [Code number: AF280/1] Draft Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 280 mm [Code number: AF280/1]
Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 280 mm [Code number: AF280/1]
Details 		AF280/1

Application purpose:

  • For joining pipes from PE and PVC in various combinations
  • For neutral liquids at permissible operating temperature + 50 °С

Characteristics:

  • Operating pressure up to 16 bar
  • One type of sleeve for PE and PVC pipes
  • No additional support for PE pipes required
  • No torque wrench required - bolts tighten to stop
  • The gap between the ends of the pipes is necessary for: compensating for thermal expansion, preventing the transmission of vibration, compensating for soil precipitation and facilitating installation/disassembly

Installation:

  • Before installation, make sure that the outer diameters of the pipes are within the range of adjustment of the coupling
  • Pipes are inserted into a freely assembled coupling, while providing a gap between the ends of the pipes of 20 mm (chamfering is not required)
  • Bolts of clamping rings are tightened all the way

Materials:

  • Central adapter, pressure ring and housing: Ductile iron in accordance with BS EN 1563:1997
  • Locking ring: Zinc alloy in accordance with BS EN 12844:1999
  • Intermediate ring: aluminum alloy 6063 state T6
  • Bolts: stainless steel BS EN ISO3506-1: 2009 Grade A2ORA4
  • Nuts: stainless steel BS EN ISO3506-2: 2009 Grade A2ORA4
  • Sealing collar: EPDM

Coatings:

  • Center adapter, pressure ring, and intermediate ring: Rilsan Nylon 11
  • Locking ring: cataphoretic coating
  • Bolts, nuts: Sheraplex conforming to WIS 4-52-03
Outer diameter of the pipe Number of bolts, diam. x length A max. B dia. Landing clearance Max clearance Weight
mm mm mm mm mm mm kg
280 6-M16 x 385 395 382 30 50 33.6
Photo Draft
Photo Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 315 mm [Code number: AF315/1] Draft Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 315 mm [Code number: AF315/1]
Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 315 mm [Code number: AF315/1]
Details 		AF315/1 101 600 rub

Application purpose:

  • For joining pipes from PE and PVC in various combinations
  • For neutral liquids at permissible operating temperature + 50 °С

Characteristics:

  • Operating pressure up to 16 bar
  • One type of sleeve for PE and PVC pipes
  • No additional support for PE pipes required
  • No torque wrench required - bolts tighten to stop
  • The gap between the ends of the pipes is necessary for: compensating for thermal expansion, preventing the transmission of vibration, compensating for soil precipitation and facilitating installation/disassembly

Installation:

  • Before installation, make sure that the outer diameters of the pipes are within the range of adjustment of the coupling
  • Pipes are inserted into a freely assembled coupling, while providing a gap between the ends of the pipes of 20 mm (chamfering is not required)
  • Bolts of clamping rings are tightened all the way

Materials:

  • Central adapter, pressure ring and housing: Ductile iron in accordance with BS EN 1563:1997
  • Locking ring: Zinc alloy in accordance with BS EN 12844:1999
  • Intermediate ring: aluminum alloy 6063 state T6
  • Bolts: stainless steel BS EN ISO3506-1: 2009 Grade A2ORA4
  • Nuts: stainless steel BS EN ISO3506-2: 2009 Grade A2ORA4
  • Sealing collar: EPDM

Coatings:

  • Center adapter, pressure ring, and intermediate ring: Rilsan Nylon 11
  • Locking ring: cataphoretic coating
  • Bolts, nuts: Sheraplex conforming to WIS 4-52-03
Outer diameter of the pipe Number of bolts, diam. x length A max. B dia. Landing clearance Max clearance Weight
mm mm mm mm mm mm kg
315 6-M16 x 385 395 417 30 50 38.7
Photo Draft
Photo Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 355 mm [Code number: AF355/1] Draft Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 355 mm [Code number: AF355/1]
Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 355 mm [Code number: AF355/1]
Details 		AF355/1

Application purpose:

  • For joining pipes from PE and PVC in various combinations
  • For neutral liquids at permissible operating temperature + 50 °С

Characteristics:

  • Operating pressure up to 16 bar
  • One type of sleeve for PE and PVC pipes
  • No additional support for PE pipes required
  • No torque wrench required - bolts tighten to stop
  • The gap between the ends of the pipes is necessary for: compensating for thermal expansion, preventing the transmission of vibration, compensating for soil precipitation and facilitating installation/disassembly

Installation:

  • Before installation, make sure that the outer diameters of the pipes are within the range of adjustment of the coupling
  • Pipes are inserted into a freely assembled coupling, while providing a gap between the ends of the pipes of 20 mm (chamfering is not required)
  • Bolts of clamping rings are tightened all the way

Materials:

  • Central adapter, pressure ring and housing: Ductile iron in accordance with BS EN 1563:1997
  • Locking ring: Zinc alloy in accordance with BS EN 12844:1999
  • Intermediate ring: aluminum alloy 6063 state T6
  • Bolts: stainless steel BS EN ISO3506-1: 2009 Grade A2ORA4
  • Nuts: stainless steel BS EN ISO3506-2: 2009 Grade A2ORA4
  • Sealing collar: EPDM

Coatings:

  • Center adapter, pressure ring, and intermediate ring: Rilsan Nylon 11
  • Locking ring: cataphoretic coating
  • Bolts, nuts: Sheraplex conforming to WIS 4-52-03
Outer diameter of the pipe Number of bolts, diam. x length Insertion Depth Setting gap Clamp band outer diameter (A) Length (L) Weight
        Installed Uninstalled    
mm mm mm mm mm mm mm kg
355 24-M16 x 120 241 210 540 571 692 213.3
Photo Draft
Photo Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 400 mm [Code number: AF400/1] Draft Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 400 mm [Code number: AF400/1]
Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 400 mm [Code number: AF400/1]
Details 		AF400/1

Application purpose:

  • For joining pipes from PE and PVC in various combinations
  • For neutral liquids at permissible operating temperature + 50 °С

Characteristics:

  • Operating pressure up to 16 bar
  • One type of sleeve for PE and PVC pipes
  • No additional support for PE pipes required
  • No torque wrench required - bolts tighten to stop
  • The gap between the ends of the pipes is necessary for: compensating for thermal expansion, preventing the transmission of vibration, compensating for soil precipitation and facilitating installation/disassembly

Installation:

  • Before installation, make sure that the outer diameters of the pipes are within the range of adjustment of the coupling
  • Pipes are inserted into a freely assembled coupling, while providing a gap between the ends of the pipes of 20 mm (chamfering is not required)
  • Bolts of clamping rings are tightened all the way

Materials:

  • Central adapter, pressure ring and housing: Ductile iron in accordance with BS EN 1563:1997
  • Locking ring: Zinc alloy in accordance with BS EN 12844:1999
  • Intermediate ring: aluminum alloy 6063 state T6
  • Bolts: stainless steel BS EN ISO3506-1: 2009 Grade A2ORA4
  • Nuts: stainless steel BS EN ISO3506-2: 2009 Grade A2ORA4
  • Sealing collar: EPDM

Coatings:

  • Center adapter, pressure ring, and intermediate ring: Rilsan Nylon 11
  • Locking ring: cataphoretic coating
  • Bolts, nuts: Sheraplex conforming to WIS 4-52-03
Outer diameter of the pipe Number of bolts, diam. x length Insertion Depth Setting gap Clamp band outer diameter (A) Length (L) Weight
        Installed Uninstalled    
mm mm mm mm mm mm mm kg
400 24-M16 x 120 247 210 585 618 704 231.3
Photo Draft
Photo Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 450 mm [Code number: AF450/1] Draft Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 450 mm [Code number: AF450/1]
Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 450 mm [Code number: AF450/1]
Details 		AF450/1

Application purpose:

  • For joining pipes from PE and PVC in various combinations
  • For neutral liquids at permissible operating temperature + 50 °С

Characteristics:

  • Operating pressure up to 16 bar
  • One type of sleeve for PE and PVC pipes
  • No additional support for PE pipes required
  • No torque wrench required - bolts tighten to stop
  • The gap between the ends of the pipes is necessary for: compensating for thermal expansion, preventing the transmission of vibration, compensating for soil precipitation and facilitating installation/disassembly

Installation:

  • Before installation, make sure that the outer diameters of the pipes are within the range of adjustment of the coupling
  • Pipes are inserted into a freely assembled coupling, while providing a gap between the ends of the pipes of 20 mm (chamfering is not required)
  • Bolts of clamping rings are tightened all the way

Materials:

  • Central adapter, pressure ring and housing: Ductile iron in accordance with BS EN 1563:1997
  • Locking ring: Zinc alloy in accordance with BS EN 12844:1999
  • Intermediate ring: aluminum alloy 6063 state T6
  • Bolts: stainless steel BS EN ISO3506-1: 2009 Grade A2ORA4
  • Nuts: stainless steel BS EN ISO3506-2: 2009 Grade A2ORA4
  • Sealing collar: EPDM

Coatings:

  • Center adapter, pressure ring, and intermediate ring: Rilsan Nylon 11
  • Locking ring: cataphoretic coating
  • Bolts, nuts: Sheraplex conforming to WIS 4-52-03
Outer diameter of the pipe Number of bolts, diam. x length Insertion Depth Setting gap Clamp band outer diameter (A) Length (L) Weight
        Installed Uninstalled    
mm mm mm mm mm mm mm kg
450 24-M16 x 120 255 210 635 670 720 253.3
Photo Draft
Photo Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 63 mm [Code number: AF63/1] Draft Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 63 mm [Code number: AF63/1]
Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 63 mm [Code number: AF63/1]
Details 		AF63/1 18 280 rub

Application purpose:

  • For joining pipes from PE and PVC in various combinations
  • For neutral liquids at permissible operating temperature + 50 °С

Characteristics:

  • Operating pressure up to 16 bar
  • One type of sleeve for PE and PVC pipes
  • No additional support for PE pipes required
  • No torque wrench required - bolts tighten to stop
  • The gap between the ends of the pipes is necessary for: compensating for thermal expansion, preventing the transmission of vibration, compensating for soil precipitation and facilitating installation/disassembly

Installation:

  • Before installation, make sure that the outer diameters of the pipes are within the range of adjustment of the coupling
  • Pipes are inserted into a freely assembled coupling, while providing a gap between the ends of the pipes of 20 mm (chamfering is not required)
  • Bolts of clamping rings are tightened all the way

Materials:

  • Central adapter, pressure ring and housing: Ductile iron in accordance with BS EN 1563:1997
  • Locking ring: Zinc alloy in accordance with BS EN 12844:1999
  • Intermediate ring: Malleable cast iron in accordance with BS EN 1563:1997
  • Bolts: stainless steel BS EN ISO3506-1: 2009 Grade A2ORA4
  • Nuts: stainless steel BS EN ISO3506-2: 2009 Grade A2ORA4
  • Sealing collar: EPDM

Coatings:

  • Center adapter, pressure ring, and intermediate ring: Rilsan Nylon 11
  • Locking ring: cataphoretic coating
  • Bolts, nuts: Sheraplex conforming to WIS 4-52-03
Outer diameter of the pipe Number of bolts, diam. x length A max. B dia. Landing clearance Max clearance Weight
mm mm mm mm mm mm kg
63 2-M12 x 250 257 141,5 20 30 3
Photo Draft
Photo Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 75 mm [Code number: AF75/1] Draft Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 75 mm [Code number: AF75/1]
Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 75 mm [Code number: AF75/1]
Details 		AF75/1

Application purpose:

  • For joining pipes from PE and PVC in various combinations
  • For neutral liquids at permissible operating temperature + 50 °С

Characteristics:

  • Operating pressure up to 16 bar
  • One type of sleeve for PE and PVC pipes
  • No additional support for PE pipes required
  • No torque wrench required - bolts tighten to stop
  • The gap between the ends of the pipes is necessary for: compensating for thermal expansion, preventing the transmission of vibration, compensating for soil precipitation and facilitating installation/disassembly

Installation:

  • Before installation, make sure that the outer diameters of the pipes are within the range of adjustment of the coupling
  • Pipes are inserted into a freely assembled coupling, while providing a gap between the ends of the pipes of 20 mm (chamfering is not required)
  • Bolts of clamping rings are tightened all the way

Materials:

  • Central adapter, pressure ring and housing: Ductile iron in accordance with BS EN 1563:1997
  • Locking ring: Zinc alloy in accordance with BS EN 12844:1999
  • Intermediate ring: Malleable cast iron in accordance with BS EN 1563:1997
  • Bolts: stainless steel BS EN ISO3506-1: 2009 Grade A2ORA4
  • Nuts: stainless steel BS EN ISO3506-2: 2009 Grade A2ORA4
  • Sealing collar: EPDM

Coatings:

  • Center adapter, pressure ring, and intermediate ring: Rilsan Nylon 11
  • Locking ring: cataphoretic coating
  • Bolts, nuts: Sheraplex conforming to WIS 4-52-03
Outer diameter of the pipe Number of bolts, diam. x length A max. B dia. Landing clearance Max clearance Weight
mm mm mm mm mm mm kg
75 2-M12 x 250 257 153,5 20 30 3,3
Photo Draft
Photo Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 90 mm [Code number: AF90/1] Draft Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 90 mm [Code number: AF90/1]
Viking Johnson AquaFast Coupling for pipes made of PE and PVC, d 90 mm [Code number: AF90/1]
Details 		AF90/1

Application purpose:

  • For joining pipes from PE and PVC in various combinations
  • For neutral liquids at permissible operating temperature + 50 °С

Characteristics:

  • Operating pressure up to 16 bar
  • One type of sleeve for PE and PVC pipes
  • No additional support for PE pipes required
  • No torque wrench required - bolts tighten to stop
  • The gap between the ends of the pipes is necessary for: compensating for thermal expansion, preventing the transmission of vibration, compensating for soil precipitation and facilitating installation/disassembly

Installation:

  • Before installation, make sure that the outer diameters of the pipes are within the range of adjustment of the coupling
  • Pipes are inserted into a freely assembled coupling, while providing a gap between the ends of the pipes of 20 mm (chamfering is not required)
  • Bolts of clamping rings are tightened all the way

Materials:

  • Central adapter, pressure ring and housing: Ductile iron in accordance with BS EN 1563:1997
  • Locking ring: Zinc alloy in accordance with BS EN 12844:1999
  • Intermediate ring: Malleable cast iron in accordance with BS EN 1563:1997
  • Bolts: stainless steel BS EN ISO3506-1: 2009 Grade A2ORA4
  • Nuts: stainless steel BS EN ISO3506-2: 2009 Grade A2ORA4
  • Sealing collar: EPDM

Coatings:

  • Center adapter, pressure ring, and intermediate ring: Rilsan Nylon 11
  • Locking ring: cataphoretic coating
  • Bolts, nuts: Sheraplex conforming to WIS 4-52-03
Outer diameter of the pipe Number of bolts, diam. x length A max. B dia. Landing clearance Max clearance Weight
mm mm mm mm mm mm kg
89,9/90 2-M12 x 250 257 170 20 30 3,9

See also

%d0%9f%d0%b5%d1%80%d0%b5%d1%85%d0%be%d0%b4%d1%8b %d0%bd%d0%b0 %d0%bf%d0%bb%d0%b0%d1%81%d1%82%d0%b8%d0%ba
PP-adapter Konfix etc.
%d0%a1%d0%be%d0%b5%d0%b4%d0%b8%d0%bd%d0%b8%d1%82%d0%b5%d0%bb%d1%8c%d0%bd%d1%8b%d0%b5 %d0%a5%d0%be%d0%bc%d1%83%d1%82%d1%8b
Connecting elements
%d0%a3%d1%81%d0%b8%d0%bb%d0%b8%d0%b2%d0%b0%d1%8e%d1%89%d0%b8%d0%b5 %d0%a5%d0%be%d0%bc%d1%83%d1%82%d1%8b
Strengthen connecting elements

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited