Viega Profipress press fittings

Viega Profipress press fittings are made of copper, gunmetal or silicon gunmetal. The fittings were tested in accordance with the DVGW W 534 instruction. They can be used in drinking water supply systems according to DIN 1988.

All fittings are equipped with SC-Conturб so that unpressed fittings can be detected visually.

Maximum operating temperature in drinking water supply systems: +85 °C.

Maximum operating temperature in heating systems: +110 °C.

Areas of application:

Drinking water systems;
Heating systems;
Cooling systems;
Rainwater;
Systems of technical and medical gases.

In addition to standard fittings, the company produces fittings especially for gas pipelines - they have yellow dot on the press connection.

Elbows

Viega Profipress elbows are made of gunmetall and copper. They are used to change the direction of the pipeline by 45° or 90°. They can be used for installation of various pipeline systems, for ...

T-pieces

Viega Profipress T-pieces are designed for mounting copper and gunmetall piping systems. The press T-pieces are equipped with a special mini-groove with the help of which unpressing connection...

Cross pieces

Cross pieces is a special fitting of the pipeline system which are used for connection two additional branches to the main pipe. Viega Profipress cross pieces are made of high quality materials....

Connection fittings

Viega Profipress connection fittings are used for the installation of copper and gunmetall pipelines. In the group of products are represented adapters and connection screw fittings with male or fe...

Couplings

Viega Profipress couplings are made of gunmetall or copper and are used for connecting of pipes. Couplings can have one smooth end or press joints at both ends. Installation is quick. The ...

Caps

Viega Profipress caps are used to close the dead-end section of the pipeline. Caps are suitable for heating systems, water supply systems etc. They are made of high-quality materials and have hi...

Connecting elements

Viega Profipress connecting elements are special fittings which are used for the installation of pipeline systems. They are used for installation in hard-to-reach places. They are made of copper...

Flanges

Viega Profipress flanges are used for the installation of pipeline system. Like other elements of the system, they have the following characteristics: High environmental safety; Reliable...

Wall plates

Viega Profipress wall plates meet the highest requirements for safety and quality elements of pipeline systems. They are equipped with an female thread and press connection - there is a SC-Contur, ...

Mounting units

Viega Profipress mounting units are used to connect the valve when installing the pipeline system. They represent a bracket with pre-mounted wall elbows or wall tees. A special mounting panel...

Valves

This group of products includes Viega Profipress ball valves, thermal shut-off system valve and seat valves which are used for the installation of pipeline systems. They are connected by means ...

Crossovers

Crossover is a special fitting which is a curved pipe. Viega Profipress crossovers are used when installing pipelines when you need to bypass an obstacle. The crossovers are made of high-quality...

Fasteners

Fasteners are used for the installation of Viega Profipress fittings. This pipeline system can be used for various needs, for example, for heating systems or water supply systems. This product g...

Accessories

The group of products includes the following Viega Profipress system elements: Gas sockets; Sealing elements; Double rosettes with depth gauge 50 mm.

Viega Profipress press fittings of copper and gunmetal