Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

VALTEC repair fittings

Home→ Catalog→ VALTEC→ Threaded fittings→ Repair fittings

VALTEC repair fittings are used not only to eliminate local leakages without welding or thread-cutting, but also for connection pipe to existing pipeline.

VALTEC repair fittings include:

  • Repair clamps that are used to eliminate local leaks. They consist of two brass semi-holders contracted between themselves with screws. EPDM gasket also included. In course of clamp installation, heavy-loaded crimping takes place and pressurization of the damaged pipe circuit section.
  • Brass hold-fast which is designed to connect pipes or fittings to existing pipelines.
  • Compression connectors for steel pipes which are convenient to use when installing temporary or repairing permanent pipelines.
Photo Наименование Article Цена
Photo Draft
Photo VALTEC Repair clamp, d - 15 [Code number: VTr.754.N.0004] Draft VALTEC Repair clamp, d - 15 [Code number: VTr.754.N.0004]
VALTEC Repair clamp, d - 15 [Code number: VTr.754.N.0004]
Details 		VTr.754.N.0004 575 rub

Purpose of application:

  • To eliminate local leaks
  • For steel, polyethylene, polypropylene and metal-plastic pipelines

Characteristics:

  • It consists of two brass half-rings, which are connected with galvanized steel screws;
  • The body is made of hot-dip galvanized brass CW617N;
  • EPDM gasket.

Operating pressure: up to 16 bar.

Operating temperature of the medium: up to +100 °С.

Average service life: 10 years.

Size D A Weight
  mm mm kg
1/2"/ 21,8 44 44,5 0,180

Documentation

Download product data sheet: VALTEC Repair clamp VTr.754.N.0004
Photo Draft
Photo VALTEC Repair clamp, d - 20 [Code number: VTr.754.N.0005] Draft VALTEC Repair clamp, d - 20 [Code number: VTr.754.N.0005]
VALTEC Repair clamp, d - 20 [Code number: VTr.754.N.0005]
Details 		VTr.754.N.0005 652 rub

Purpose of application:

  • To eliminate local leaks
  • For steel, polyethylene, polypropylene and metal-plastic pipelines

Characteristics:

  • It consists of two brass half-rings, which are connected with galvanized steel screws;
  • The body is made of hot-dip galvanized brass CW617N;
  • EPDM gasket.

Operating pressure: up to 16 bar.

Operating temperature of the medium: up to +100 °С.

Average service life: 10 years.

Size D A Weight
  mm mm kg
3/4"/27,0 51 44,5 0,198

Documentation

Download product data sheet: VALTEC Repair clamp VTr.754.N.0005
Photo Draft
Photo VALTEC Repair clamp, d - 25 [Code number: VTr.754.N.0006] Draft VALTEC Repair clamp, d - 25 [Code number: VTr.754.N.0006]
VALTEC Repair clamp, d - 25 [Code number: VTr.754.N.0006]
Details 		VTr.754.N.0006 885 rub

Purpose of application:

  • To eliminate local leaks
  • For steel, polyethylene, polypropylene and metal-plastic pipelines

Characteristics:

  • It consists of two brass half-rings, which are connected with galvanized steel screws;
  • The body is made of hot-dip galvanized brass CW617N;
  • EPDM gasket.

Operating pressure: up to 16 bar.

Operating temperature of the medium: up to +100 °С.

Average service life: 10 years.

Size D A Weight
  mm mm kg
1"/ 34,0 59 50 0,354

Documentation

Download product data sheet: VALTEC Repair clamp VTr.754.N.0006
Photo Draft
Photo (ARTICLE REPLACED WITH VTr.754.N.0004) - VALTEC Repair clamp, d - 15 [Code number: VTr.754.N.04] Draft (ARTICLE REPLACED WITH VTr.754.N.0004) - VALTEC Repair clamp, d - 15 [Code number: VTr.754.N.04]
(ARTICLE REPLACED WITH VTr.754.N.0004) - VALTEC Repair clamp, d - 15 [Code number: VTr.754.N.04]
Details 		VTr.754.N.04
Photo Draft
Photo VALTEC Repair clamp, d - 20 [Code number: VTr.754.N.05] Draft VALTEC Repair clamp, d - 20 [Code number: VTr.754.N.05]
VALTEC Repair clamp, d - 20 [Code number: VTr.754.N.05]
Details 		VTr.754.N.05
Photo Draft
Photo (ARTICLE REPLACED WITH VTr.754.N.0006) - VALTEC Repair clamp, d - 25 [Code number: VTr.754.N.06] Draft (ARTICLE REPLACED WITH VTr.754.N.0006) - VALTEC Repair clamp, d - 25 [Code number: VTr.754.N.06]
(ARTICLE REPLACED WITH VTr.754.N.0006) - VALTEC Repair clamp, d - 25 [Code number: VTr.754.N.06]
Details 		VTr.754.N.06
Photo Draft
Photo VALTEC Brass hold-fast (drain, saddle tee) for pipe, d - 1/2", d1 - 1/2", d2 - 1/2" [Code number: VTr.755.G.0404] Draft VALTEC Brass hold-fast (drain, saddle tee) for pipe, d - 1/2", d1 - 1/2", d2 - 1/2" [Code number: VTr.755.G.0404]
VALTEC Brass hold-fast (drain, saddle tee) for pipe, d - 1/2", d1 - 1/2", d2 - 1/2" [Code number: VTr.755.G.0404]
Details 		VTr.755.G.0404 676 rub
Photo Draft
Photo VALTEC Brass hold-fast (drain, saddle tee) for pipe, d - 3/4", d1 - 1/2", d2 - 3/4" [Code number: VTr.755.G.0504] Draft VALTEC Brass hold-fast (drain, saddle tee) for pipe, d - 3/4", d1 - 1/2", d2 - 3/4" [Code number: VTr.755.G.0504]
VALTEC Brass hold-fast (drain, saddle tee) for pipe, d - 3/4", d1 - 1/2", d2 - 3/4" [Code number: VTr.755.G.0504]
Details 		VTr.755.G.0504 716 rub
Photo
Photo VALTEC Compression fitting for steel pipes with passage male thread, d - 15, d1 - 1/2" [Code number: VTr.801.N.0404]
VALTEC Compression fitting for steel pipes with passage male thread, d - 15, d1 - 1/2" [Code number: VTr.801.N.0404]
Details 		VTr.801.N.0404 698 rub

Application purpose:

  • For installation of temporary steel pipeline
  • For the repair of permanent pipelines made of steel
  • For connecting water and gas pipes made of steel

Characteristics:

  • The connection is made using two wrenches;
  • Body and union nut material: sanitary brass (they are nickel-plated);
  • The split ferrule is made of hardened stainless steel;
  • The ring closes when the union nut is screwed in and cuts into the pipe wall - this ensures reliable fixation. The connection is sealed by an EPDM Sh70 sealing ring that tightly compresses the pipe;
  • Connection type: collapsible;
  • Thread type: male;
  • Multiple use is possible;
  • Angular movements of the pipe are allowed within 3°;
  • Working pressure: up to 8 bar;
  • Working temperature: up to +90 ºС.

Important! Compression fittings must be located in a place accessible for maintenance, i.e. they must not be embedded!

Size: DN15 - G 1/2".
Photo
Photo (NO LONGER PRODUCED) - VALTEC Compression fitting for steel pipes with passage male thread, d - 20, d1 - 3/4" [Code number: VTr.801.N.0505]
(NO LONGER PRODUCED) - VALTEC Compression fitting for steel pipes with passage male thread, d - 20, d1 - 3/4" [Code number: VTr.801.N.0505]
Details 		VTr.801.N.0505

Application purpose:

  • For installation of temporary steel pipeline
  • For the repair of permanent pipelines made of steel
  • For connecting water and gas pipes made of steel

Characteristics:

  • The connection is made using two wrenches;
  • Body and union nut material: sanitary brass (they are nickel-plated);
  • The split ferrule is made of hardened stainless steel;
  • The ring closes when the union nut is screwed in and cuts into the pipe wall - this ensures reliable fixation. The connection is sealed by an EPDM Sh70 sealing ring that tightly compresses the pipe;
  • Connection type: collapsible;
  • Thread type: male;
  • Multiple use is possible;
  • Angular movements of the pipe are allowed within 3°;
  • Working pressure: up to 8 bar;
  • Working temperature: up to +90 ºС.

Important! Compression fittings must be located in a place accessible for maintenance, i.e. they must not be embedded!

Size: DN20 - G 3/4".
Photo
Photo (NO LONGER PRODUCED) - VALTEC Compression fitting for steel pipes with passage male thread, d - 25, d1 - 1" [Code number: VTr.801.N.0606]
(NO LONGER PRODUCED) - VALTEC Compression fitting for steel pipes with passage male thread, d - 25, d1 - 1" [Code number: VTr.801.N.0606]
Details 		VTr.801.N.0606

Application purpose:

  • For installation of temporary steel pipeline
  • For the repair of permanent pipelines made of steel
  • For connecting water and gas pipes made of steel

Characteristics:

  • The connection is made using two wrenches;
  • Body and union nut material: sanitary brass (they are nickel-plated);
  • The split ferrule is made of hardened stainless steel;
  • The ring closes when the union nut is screwed in and cuts into the pipe wall - this ensures reliable fixation. The connection is sealed by an EPDM Sh70 sealing ring that tightly compresses the pipe;
  • Connection type: collapsible;
  • Thread type: male;
  • Multiple use is possible;
  • Angular movements of the pipe are allowed within 3°;
  • Working pressure: up to 8 bar;
  • Working temperature: up to +90 ºС.

Important! Compression fittings must be located in a place accessible for maintenance, i.e. they must not be embedded!

Size: DN25 - G 1".
Photo
Photo VALTEC Compression fitting for steel pipes, d - 15 [Code number: VTr.803.N.0404]
VALTEC Compression fitting for steel pipes, d - 15 [Code number: VTr.803.N.0404]
Details 		VTr.803.N.0404 1 155 rub

Application purpose:

  • For installation of temporary steel pipeline
  • For the repair of permanent pipelines made of steel
  • For connecting water and gas pipes made of steel

Characteristics:

  • The connection is made using two wrenches;
  • Body and union nut material: sanitary brass (they are nickel-plated);
  • The split ferrule is made of hardened stainless steel;
  • The ring closes when the union nut is screwed in and cuts into the pipe wall - this ensures reliable fixation. The connection is sealed by an EPDM Sh70 sealing ring that tightly compresses the pipe;
  • Connection type: collapsible;
  • Multiple use is possible;
  • Angular movements of the pipe are allowed within 3°;
  • Working pressure: up to 8 bar;
  • Working temperature: up to +90 ºС.

Important! Compression fittings must be located in a place accessible for maintenance, i.e. they must not be embedded!

Size: DN15.
Photo
Photo VALTEC Compression fitting for steel pipes, d - 20 [Code number: VTr.803.N.0505]
VALTEC Compression fitting for steel pipes, d - 20 [Code number: VTr.803.N.0505]
Details 		VTr.803.N.0505 1 616 rub

Application purpose:

  • For installation of temporary steel pipeline
  • For the repair of permanent pipelines made of steel
  • For connecting water and gas pipes made of steel

Characteristics:

  • The connection is made using two wrenches;
  • Body and union nut material: sanitary brass (they are nickel-plated);
  • The split ferrule is made of hardened stainless steel;
  • The ring closes when the union nut is screwed in and cuts into the pipe wall - this ensures reliable fixation. The connection is sealed by an EPDM Sh70 sealing ring that tightly compresses the pipe;
  • Connection type: collapsible;
  • Multiple use is possible;
  • Angular movements of the pipe are allowed within 3°;
  • Working pressure: up to 8 bar;
  • Working temperature: up to +90 ºС.

Important! Compression fittings must be located in a place accessible for maintenance, i.e. they must not be embedded!

Size: DN20.
Photo
Photo VALTEC Compression fitting for steel pipes, d - 25 [Code number: VTr.803.N.0606]
VALTEC Compression fitting for steel pipes, d - 25 [Code number: VTr.803.N.0606]
Details 		VTr.803.N.0606 2 572 rub

Application purpose:

  • For installation of temporary steel pipeline
  • For the repair of permanent pipelines made of steel
  • For connecting water and gas pipes made of steel

Characteristics:

  • The connection is made using two wrenches;
  • Body and union nut material: sanitary brass (they are nickel-plated);
  • The split ferrule is made of hardened stainless steel;
  • The ring closes when the union nut is screwed in and cuts into the pipe wall - this ensures reliable fixation. The connection is sealed by an EPDM Sh70 sealing ring that tightly compresses the pipe;
  • Connection type: collapsible;
  • Multiple use is possible;
  • Angular movements of the pipe are allowed within 3°;
  • Working pressure: up to 8 bar;
  • Working temperature: up to +90 ºС.

Important! Compression fittings must be located in a place accessible for maintenance, i.e. they must not be embedded!

Size: DN25.

See also

PP-adapter Konfix etc.
Connecting elements
Strengthen connecting elements
© Inrusstrade.ru 1999-2025. "Inrusstrade" Ltd. Copying and quoting is prohibited