Logo
Ru| En
Loading

Hydraulic tools of REHAU RAUTOOL

Hydraulic and mechanical-hydraulic tools of REHAU RAUTOOL are designed for installation of REHAU pipe systems. The kits of mechanical-hydraulic and hydraulic tools typically include:

  • A tool for removing barbs;
  • Clamping jaws;
  • Pipe grippers;
  • Case for transport etc.

This type of installation tool is optimal for construction sites where there is no electricity. The tools are suitable for installation of pipes with diameters from 16 mm to 160 mm.

Instruments have drive through hand or foot pump.

Photo Наименование Article Цена
Kit RAUTOOL H2 [Code number: 202 484 001]
Details
202_484_001 223 462 rub

Hydraulic-mechanical tool RAUTOOL H2 is suited for the installation of REHAU piping systems REHAU, it can be used in areas without electricity.

The advantages of using the installation tool RAUTOOL H2:

  • Due to the double compression jaw, two dimensions can be processed without alteration;
  • Easy to install even in tight spots due to the compact design and the ergonomic joint to the compression cylinder;
  • Big lift cylinder increases the speed of operation;
  • Foot pump is equipped with two-way mechanism drain valve, so that RAUTOOL H2 more convenient to use;
  • The tool can be used for the installation of pipes with diameter of 16-40 mm;
  • Tool RAUTOOL H2 is robust and durable;
  • Maintenance-free;
  • Easy to operate.

The kit includes:

  • Tool RAUTOOL H2:
  • Hydraulic hose 3.5 m;
  • 2 mounting pins;
  • REHAU 40 stabil pipe cutter;
  • Expanding pliers RO;
  • Cleaning brush;
  • Lubricant;
  • Transport case;
  • Operating instructions.

If necessary, the kit RAUTOOL H2 can be supplemented with the following expansion sets and accessories:

  • RAUTITAN stabil 16 - 32 expansion set, RAUTITAN flex 16 - 32 expansion set and RAUTITAN flex 40 expansion set;
  • Single and double compression jaws;
  • Internal spiral spring for RAUTITAN stabil pipe;
  • Expander bits for expanding pipes;
  • Pipe shears for cutting pipes.
Kit RAUTOOL G2, d 50/63 [Code number: 203 599 001]
Details
203_599_001 292 523 rub

Electro-hydraulic tool RAUTOOL G2 kit is suitable for the installation of REHAU pipe systems with diameters of 50-63 mm.

The kit includes:

  • Tool RAUTOOL G2;
  • Set of compression jaws G1 50 and G1 63 (for SDR 7,4 and SDR 11);
  • Pipe cutters 63;
  • Cleaning brush;
  • Burr remover;
  • Transport case;
  • Operating instructions.
Kit RAUTOOL G2 [Code number: 314 985 001]
Details
314_985_001 292 523 rub

Hydraulic tool RAUTOOL G2 is equipped with battery, it is used for REHAU pipes with diameters of 40-110 mm.

Technical data

Maximum operating pressure: 450 bar.

Maximum shearing force: 56 kN (linear).

Battery capacity: 18 V / 3.0 Ah.

Battery type: Lithium-ion.

Battery charge time: approx. 22 minutes.

Compressions with one battery charge: approx. 80.

Mains voltage for charging: 230 V / 50 Hz or 110 V (optional).

Ambient temperature: from -10°С to +45°С.

The RAUTOOL G2 kit includes:

  • Tool RAUTOOL G2;
  • Hydraulic cylinder with hydraulic hose;
  • Kit of the expander tool with 2 locking pins and fastening nut;
  • 2 locking pins;
  • Lithium-ion battery;
  • Charging station for lithium-ion battery;
  • Set of compression jaws G 50;
  • Set of compression jaws G 63;
  • Pipe Cutters 63;
  • Burr remover;
  • Transport case;
  • Operating instructions.

The kit can be supplemented with the following expansion sets and accessories:

  • Expansion set for hydraulic expansion of pipes;
  • Spare battery;
  • Network adapter which is used to connect the tool to the network;
  • Internal spiral spring for RAUTITAN stabil pipe.
Kit RAUTOOL H/G1 (F), d 50x4,6-63x5,7 [Code number: 137 404 001]
Details
137_404_001 236 603 rub

RAUTOOL H/G1 - it is mechanical-hydraulic tool which is used for installation of the REHAU pipeline systems.

The kit includes:

  • Tool RAUTOOL H/G1 with foot pump;
  • Hydraulic hose 4 m;
  • Expander head G1 50x6,9/63x8,6 (SDR 7,4) or Expander head G1 50x4,6/63x5,7 (SDR 11);
  • Pipe cutters 63;
  • Sets of compression jaws G1 50 and G1 63;
  • Burr remover;
  • Transport case;
  • Operating instructions.
Kit RAUTOOL G XL, d 125/140/160 [Code number: 314 984 001]
Details
314_984_001

Kit for electro-hydraulic tools RAUTOOL G and XL which is used for mounting REHAU pipes systems with diameters 125/140/160 mm.

Rehau RAUTOOL Xpand Kit [Code number: 208 891 001]
Details
208_891_001 28 050 rub

Hydraulic expander tool RAUTOOL Xpand is equipped with a battery, it is used for installing the REHAU pipes.The expander tool is used for installation of pipes with diameters of 16-40 mm.

The kit uncludes:

  • Tool RAUTOOL Xpand;
  • Lithium-ion battery;
  • Lubricant;
  • Cleaning brush.
Kit RAUTOOL H/G1, d 50x6,9-63x8,6 [Code number: 137 425 001]
Details
137_425_001 236 603 rub

Hydraulic-mechanical-powered tool RAUTOOL H/G1 SDR 7,4 is  equipped with foot pump. The kit is designed for the installation of REHAU pipes and fittings which are mounted with compression sleeves. For pipes with diameters of 50-63 mm.

The kit includes:

  • RAUTOOL H/G1;
  • Hydraulic hose 4 m;
  • Expander head G1 50x6,9 / 63x8,6;
  • Set of compression jaws G1 50 and G1 63;
  • Pipe cutters 63;
  • Burr remover;
  • Transport Case;
  • Operating Instructions.

The kit weighs 34 kg.

Kit RAUTOOL A3 [Code number: 203 595 001]
Details
203_595_001 165 998 rub

Battery-hydraulic tool RAUTOOL A3 is used for installation of REHAU pipes which are connected by compression sleeves. It can be used with pipes and fittings DN12-40. There is a built-in flashlight.

Technical data

Maximum operating pressure: 450 bar.

Maximum shearing force: 18 kN (linear).

Battery type: lithium-ion.

Battery capacity: 18 V / 3.0 Ah.

Compressions with one battery charge: over 200.

Battery charge time: approx. 22 minutes.

Mains voltage for charging: 230 V / 50 Hz.

Ambient temperature: from -10°С to +45°С.

Weight: 4 kg (tool and battery).

The kit includes:

  • Tool RAUTOOL A3;
  • 2 dowels;
  • Charging station 230V;
  • Lithium-ion battery, 18 V / 3 Ah;
  • REHAU 40 stabil pipe cutter;
  • Expanding Pliers RO;
  • Lubricant;
  • Cleaning brush;
  • Transport case;
  • Operating instructions.

The RAUTOOL A3 kit can be supplemented with the following expansion sets and accessories:

  • Expander heads for manual expansion of pipes;
  • Expander heads for hydraulic expansion of pipes;
  • Spare battery;
  • Network adapter which is used to connect the tool to the network;
  • Internal spiral spring for RAUTITAN stabil pipe;
  • Pipe shears for cutting of pipes.
Rehau RAUTOOL A-light2 Kit [Code number: 203 597 001]
Details
203_597_001 291 472 rub

Small, light battery-hydraulic-powered installation tool RAUTOOL A-light2 is used for installation of REHAU pipes which are connected with compression sleeves.

Maximum operating pressure: 450 bar.

Maximum shearing force: 18 kN (linear).

Battery type: lithium-ion.

Battery capacity: 18 V / 1.5 Ah.

Battery charge time: approx. 22 minutes.

Compressions with one battery charge: approx. 180.

Mains voltage for charging: 230 V / 50 Hz.

Ambient temperature: from -10°С to +45°С.

The kit includes:

  • Tool RAUTOOL A-light2;
  • Lithium-ion battery;
  • Charging station;
  • Pipe cutters 40 stabil;
  • Expander tool QC;
  • Lubricant;
  • Cleaning brush;
  • Transport case;
  • Operating instructions.

The tool RAUTOOL A-light2 can be equipped with the following expansion sets and accessories:

  • Expansion sets for manual/hydraulic expansion;
  • Spare battery;
  • Network adapter which is required to connect the tool to the network;
  • Internal spiral spring for RAUTITAN stabil pipe;
  • Pipe shears.
Kit RAUTOOL H/G1 (F), d 50x4,6-63x5,7 [Code number: 314 987 001]
Details
314_987_001 202 800 rub

RAUTOOL H/G1 - it is mechanical-hydraulic tool with foot pump, it is designed for installation of pipes with diameters of 50-63 mm.

The kit includes:

  • Hydraulic hose 4 m;
  • Sets of compression jaws G1 50 and G1 63 (for SDR 7,4 and SDR 11);
  • Pipe cutters 63;
  • Burr remover;
  • Transport case;
  • Operating instructions.

Excluded:

  • Expander head G1 50 х 6,9 / 63 х 8,6 (SDR 7,4);
  • Expander head G1 50 х 4,6 / 63 х 5,7 (SDR 11).
Rehau RAUTOOL Xpand Kit [Code number: 216 820 001]
Details
216_820_001 145 736 rub

RAUTOOL Xpand - it is the new generation of battery hydraulic expander tool, which is used with expander heads QC. The expander tool can be used with expander heads which are designed for pipes with diameters of 16-40 mm. You can use the expander tool with expander heads RO.

Rehau expansion set for hydraulic expansion pipes RAUTHERM d 17-32 [Code number: 248 431 001]
Details
248_431_001 28 496 rub

Rehau expansion set for tools RAUTOOL E2, A1, A2. The set is used for hydraulic expansion RAUTHERM pipes with diameters of 17-32 mm.

See also