B-Press | Inrusstrade

IBP B-Press fittings are made of copper and yellow brass according to the highest European quality standards. They are suitable for mounting various systems:

Heating systems;
Water applications;
Gas pipelines;
Solar collectors.

IBP B-Press fittings can be used in conjunction with copper pipes manufactured in accordance with PN-EN 1057.

The installation is carried out using a press tool, and pressing is performed twice - before and behind the sealing element, so that the connection is maximally sealed, durable and resistant to tears. The sealing element is made of EPDM - this material retains its properties even at extreme temperatures.

IBP B-Press fittings are tested and approved for use by the DVGW certificate in accordance with instruction B 53.

Maximum temperature in plumbing systems is +95 °C at pressure up to 16 bar.

Maximum temperature in heating systems is +110 °C at pressure up to 6 bar.

Elbows

IBP B-Press elbows are made of copper and bronze. They are used to change the direction of the pipeline if necessary. Elbows can be equipped with male or femalethread for connection to threaded ...

Tees

IBP B-Press tees are suitable for connection copper pipes in heating systems, water applications and gas pipelines. They are used for connection two branches of the pipeline. The tees, like othe...

Reducers

IBP B-Press reducers, like other fittings, are made of copper and yellow brass, and they are suitable for heating, water and gas applications. They are divided into several types: Reduced ...

Couplers

IBP B-Press couplers are divided into several types: Connection couplers wich are used to connect pipes and fittings with the same diameter; Reduced couplers for connecting pipes and fittin...

Unions

IBP B-Press unions are used for installation of heating systems and water applications. Fittings differ in diameter, and it can be from 12 to 54 mm. Some models are equipped with a threaded conn...

Flanges

IBP B-Press flanges are applied when installation of heating systems, water applications and gas pipelines. They are made of high quality material, they are resistant to corrosion. The flange...

Stop ends

IBP B-Press stop ends are made of high-quality materials. They are designed to close dead-end sections of pipelines of heating system and water system. Like other elements of the IBP B-Press sys...

Cross - Over

Cross - over is an important element of the pipeline system, wich is repeat bend of the pipe and allow to overcome any obstacles. IBP B-Press cross - over are designed for connection with press ...

Installation units

IBP B-Press installation units are used for the installation of various piping systems. The installation unit consists of two elbows which are pre-mounted on bracket. This bracket can be fixed i...

O-rings IBP B-Press

IBP B-Press O-rings are made of EPDM - this material is resistant to UV radiation, low and high temperatures, oxidation, acids and alkalis. O-rings are used for the installation of B-Press pipel...

B-Press copper and gunmetal press-fittings