IBP Threaded brass adapters

IBP threaded brass adapters can be used in heating systems, cold drinking and hot water systems, compressed air pipelines, technical pipelines that are used to transport gases and liquids that are not corrosive to the material of the adapters.

Fittings can be mounted on pipelines of various materials: steel, plastic, copper, brass, multilayer etc.

All transition and connecting elements are made of brass CW 617N according to EN 12165. They can have coating of nickel or chrome.

The male/female connection thread corresponds to IS0228 (BS2779).

The average service life is 30 years.

Nominal pressure: up to 2.5 MPa (25 Bar).

Working medium temperature: from -20 °С to +150°С.

Elbows

IBP elbows of brass are used for changing the direction of the pipeline if necessary. Elbows are equipped with male or female thread from 3/8" to 2". The threaded joint ensures complete tightnes...

Tees

IBP brass tees are used when it is required to connect two pipeline flows. Tees can be divided into 2 types: Reduced - these fittings are used for connection of pipes and fittings with differ...

Crosses

IBP brass crosses are used in cases where it is necessary to connect several pipeline flows. They are equipped with threaded connection from 3/8" to 2". The brass crosses can be used in cold ...

Reducers

IBP brass reducers include: Transitional elements for connecting pipes and fittings with different types of thread; Elements for connecting pipes and fittings with different diameters; Re...

Couplers

IBP couplers are made of brass, they are equipped with threaded connection from 3/8" to 2". Couplers are used to connect pipes and fittings from various materials (for example, steel, bronze, brass...

Unions

IBP unions are used for the installation of heating systems, and pipeline for the supply of cold or hot water, as well as technical pipelines. The unions are equipped with male or female thread ...

Extension sockets

IBP extension sockets are made of high quality brass, so that they can be used in various pipelines, for example, in heating systems and drinking water supply systems. They have thread from 3/8"...

Nipples

IBP nipple is a special pipe with male thread at both ends and is used for connecting pipes and fittings with female thread. This type of connection can be temporary or permanent. IBP nipples of br...

Locknuts

IBP locknuts, which are presented in this group of products, are intended for installation of pipeline systems. All locknuts are equipped with threaded connection from 3/8" to 1"1/2. They are ma...

Plugs

The plug is designed for closing the dead-end section of the pipeline. IBP brass plugs are equipped with male and female thread, they ensure completely hermetic closure of the pipeline. Some mod...

IBP Threaded brass adapters for water and heating systems, and technical pipelines