Logo
Ru| En
Loading

Universal clamps for PAM-GLOBAL pipes

Universal clamps for pipe are classified according to the nominal inside diameter. They can use for mounting various kinds of pipeline components, incl. the PAM-GLOBAL SML system. Pipe clamps PAM-GLOBAL are used on difficult sections of pipeline for creation tough fixation of the pipes.

The advantages of using the PAM-GLOBAL clamps

     1. Soundproofed gasket

The PAM-GLOBAL clamps are manufactured with a sound-insulating gasket made of EPDM rubber - the EPDM gasket reduces noise level. The gasket is resistant to aging.

     2. Fast installation

The main advantage of using the PAM-GLOBAL clamps is very simple and quick installation - the clamps is securely fixed with two screws. They can tighten up without of special tools.

     3. High fire safety

The clamps are characterized by high fire safety and this is confirmed the relevant test regulations. They are tested on impact resistance for reducing probability of mechanical damage.

You can see prices for universal clamps in our price list.

Photo Наименование Article Цена
Single bossed clamp, heavy-duty version, with highly elastic insert, DGL, M12, d 355 mm (353-360mm) [Code number: 122325]
Details
122325 7 277 rub

Application purpose:

  • For pipelines with dynamic loads in combination with expansion points
  • For fixings in industrial areas
  • For fixings in air conditioning, ventilation and sanitary areas
  • For indoor use

Advantages:

  • Proven two-part clamp with increased material cross-section
  • Stronger tightening bolts for high load capacity
  • DÄMMGULAST® vibration control lining with yellow identification stripe: average sound level improvement up to 22 dB(A)
Connecting thread Clamping range b x s B b1 H1 H V
mm mm mm mm mm mm mm mm
M12 353–360 50 x 5.0 447 56 392 204 M12
EURO-QUICK Pipe clamp, J type, with highly elastic insert, galvanised, M10/M12, d 300-310 mm [Артикул: 153924]
Details
153924

Application purpose:

  • For fixings in industrial areas
  • For fastening of drinking water and heating pipes
  • For indoor use

Advantages:

  • Proven two-part clamp
  • High rigidity thanks to reinforcing rib
  • 2 fastening screws provide a better fit for larger deviations from the pipe diameter
  • Cross-head fastening screws are suitable for working with a screwdriver
  • With highly elastic insert
  • Confident connection due to the rounded flange
  • Reinforcing rib provide secure installation and prevent slippage
Connecting thread For pipe outer DN B b1 H H1 V
mm mm mm mm mm mm mm
M10/M12 300-310 361,0 28 188,0 353 M8
EURO-QUICK Pipe clamp, J type, with highly elastic insert, galvanised, M10/M12, d 311-321 mm [Артикул: 153925]
Details
153925

Application purpose:

  • For fixings in industrial areas
  • For fastening of drinking water and heating pipes
  • For indoor use

Advantages:

  • Proven two-part clamp
  • High rigidity thanks to reinforcing rib
  • 2 fastening screws provide a better fit for larger deviations from the pipe diameter
  • Cross-head fastening screws are suitable for working with a screwdriver
  • With highly elastic insert
  • Confident connection due to the rounded flange
  • Reinforcing rib provide secure installation and prevent slippage
Connecting thread For pipe outer DN B b1 H H1 V
mm mm mm mm mm mm mm
M10/M12 311-321 372,0 28 193,0 362 M8
EURO-QUICK Pipe clamp, J type, with highly elastic insert, galvanised, M10/M12, d 12" (322-332 mm) [Артикул: 153926]
Details
153926

Application purpose:

  • For fixings in industrial areas
  • For fastening of drinking water and heating pipes
  • For indoor use

Advantages:

  • Proven two-part clamp
  • High rigidity thanks to reinforcing rib
  • 2 fastening screws provide a better fit for larger deviations from the pipe diameter
  • Cross-head fastening screws are suitable for working with a screwdriver
  • With highly elastic insert
  • Confident connection due to the rounded flange
  • Reinforcing rib provide secure installation and prevent slippage
Connecting thread For pipe outer DN B b1 H H1 V
mm mm mm mm mm mm mm
M10/M12 322-332 385,0 28 198,0 373 M8
EURO-QUICK Pipe clamp, J type, with highly elastic insert, galvanised, M8/M10, d 1/2" (21-25 mm) [Code number: 153885]
Details
153885

Application purpose:

  • For fixings in industrial areas
  • For fastening of drinking water and heating pipes
  • For indoor use

Advantages:

  • Proven two-part clamp
  • High rigidity thanks to reinforcing rib
  • 2 fastening screws provide a better fit for larger deviations from the pipe diameter
  • Cross-head fastening screws are suitable for working with a screwdriver
  • With highly elastic insert
  • Confident connection due to the rounded flange
  • Reinforcing rib provide secure installation and prevent slippage
Connecting thread For pipe outer DN B b1 H H1 V
mm mm mm mm mm mm mm
M8-M10 21-25 58,5 21 37,5 54 M6
EURO-QUICK Pipe clamp, J type, with highly elastic insert, galvanised, M8/M10, d 3/4" (25-30 mm) [Code number: 153886]
Details
153886

Application purpose:

  • For fixings in industrial areas
  • For fastening of drinking water and heating pipes
  • For indoor use

Advantages:

  • Proven two-part clamp
  • High rigidity thanks to reinforcing rib
  • 2 fastening screws provide a better fit for larger deviations from the pipe diameter
  • Cross-head fastening screws are suitable for working with a screwdriver
  • With highly elastic insert
  • Confident connection due to the rounded flange
  • Reinforcing rib provide secure installation and prevent slippage
Connecting thread For pipe outer DN B b1 H H1 V
mm mm mm mm mm mm mm
M8-M10 25-30 62,5 21 39,5 59 M6
EURO-QUICK Pipe clamp, J type, with highly elastic insert, galvanised, M8/M10, d 1 1/4" (40-45 mm) [Code number: 153888]
Details
153888

Application purpose:

  • For fixings in industrial areas
  • For fastening of drinking water and heating pipes
  • For indoor use

Advantages:

  • Proven two-part clamp
  • High rigidity thanks to reinforcing rib
  • 2 fastening screws provide a better fit for larger deviations from the pipe diameter
  • Cross-head fastening screws are suitable for working with a screwdriver
  • With highly elastic insert
  • Confident connection due to the rounded flange
  • Reinforcing rib provide secure installation and prevent slippage
Connecting thread For pipe outer DN B b1 H H1 V
mm mm mm mm mm mm mm
M8-M10 40-45 78,5 21 45,5 73 M6
EURO-QUICK Pipe clamp, J type, with highly elastic insert, galvanised, M8/M10, d 54-58 mm [Code number: 153890]
Details
153890 89 rub

Application purpose:

  • For fixings in industrial areas
  • For fastening of drinking water and heating pipes
  • For indoor use

Advantages:

  • Proven two-part clamp
  • High rigidity thanks to reinforcing rib
  • 2 fastening screws provide a better fit for larger deviations from the pipe diameter
  • Cross-head fastening screws are suitable for working with a screwdriver
  • With highly elastic insert
  • Confident connection due to the rounded flange
  • Reinforcing rib provide secure installation and prevent slippage
Connecting thread For pipe outer DN B b1 H H1 V
mm mm mm mm mm mm mm
M8-M10 54-58 92,5 21 51,0 84 M6
EURO-QUICK Pipe clamp, J type, with highly elastic insert, galvanised, M8/M10, d 2" (59-63 mm) [Code number: 153891]
Details
153891

Application purpose:

  • For fixings in industrial areas
  • For fastening of drinking water and heating pipes
  • For indoor use

Advantages:

  • Proven two-part clamp
  • High rigidity thanks to reinforcing rib
  • 2 fastening screws provide a better fit for larger deviations from the pipe diameter
  • Cross-head fastening screws are suitable for working with a screwdriver
  • With highly elastic insert
  • Confident connection due to the rounded flange
  • Reinforcing rib provide secure installation and prevent slippage
Connecting thread For pipe outer DN B b1 H H1 V
mm mm mm mm mm mm mm
M8-M10 59-63 96,5 21 53,0 89 M6
EURO-QUICK Pipe clamp, J type, with highly elastic insert, galvanised, M8/M10, d 2.1/2" (72-78 mm) [Code number: 153893]
Details
153893

Application purpose:

  • For fixings in industrial areas
  • For fastening of drinking water and heating pipes
  • For indoor use

Advantages:

  • Proven two-part clamp
  • High rigidity thanks to reinforcing rib
  • 2 fastening screws provide a better fit for larger deviations from the pipe diameter
  • Cross-head fastening screws are suitable for working with a screwdriver
  • With highly elastic insert
  • Confident connection due to the rounded flange
  • Reinforcing rib provide secure installation and prevent slippage
Connecting thread For pipe outer DN B b1 H H1 V
mm mm mm mm mm mm mm
M8-M10 72-78 111,0 23 60,0 103 M6
EURO-QUICK Pipe clamp, J type, with highly elastic insert, galvanised, M8/M10, d 83 mm (78-86 mm) [Code number: 153894]
Details
153894

Application purpose:

  • For fixings in industrial areas
  • For fastening of drinking water and heating pipes
  • For indoor use

Advantages:

  • Proven two-part clamp
  • High rigidity thanks to reinforcing rib
  • 2 fastening screws provide a better fit for larger deviations from the pipe diameter
  • Cross-head fastening screws are suitable for working with a screwdriver
  • With highly elastic insert
  • Confident connection due to the rounded flange
  • Reinforcing rib provide secure installation and prevent slippage
Connecting thread For pipe outer DN B b1 H H1 V
mm mm mm mm mm mm mm
M8-M10 78-86 119,0 23 64,0 111 M6
EURO-QUICK Pipe clamp, J type, with highly elastic insert, galvanised, M8/M10, d 102 mm (98-104 mm) [Code number: 153896]
Details
153896

Application purpose:

  • For fixings in industrial areas
  • For fastening of drinking water and heating pipes
  • For indoor use

Advantages:

  • Proven two-part clamp
  • High rigidity thanks to reinforcing rib
  • 2 fastening screws provide a better fit for larger deviations from the pipe diameter
  • Cross-head fastening screws are suitable for working with a screwdriver
  • With highly elastic insert
  • Confident connection due to the rounded flange
  • Reinforcing rib provide secure installation and prevent slippage
Connecting thread For pipe outer DN B b1 H H1 V
mm mm mm mm mm mm mm
M8-M10 98-104 137,0 23 73,0 129 M6
EURO-QUICK Pipe clamp, J type, with highly elastic insert, galvanised, M8/M10, d 116 mm (114-118 mm) [Code number: 153898]
Details
153898

Application purpose:

  • For fixings in industrial areas
  • For fastening of drinking water and heating pipes
  • For indoor use

Advantages:

  • Proven two-part clamp
  • High rigidity thanks to reinforcing rib
  • 2 fastening screws provide a better fit for larger deviations from the pipe diameter
  • Cross-head fastening screws are suitable for working with a screwdriver
  • With highly elastic insert
  • Confident connection due to the rounded flange
  • Reinforcing rib provide secure installation and prevent slippage
Connecting thread For pipe outer DN B b1 H H1 V
mm mm mm mm mm mm mm
M8-M10 114-118 156,0 23 81,0 145 M6
EURO-QUICK Pipe clamp, J type, with highly elastic insert, galvanised, M8/M10, d 4'' (119-123 mm) [Code number: 153899]
Details
153899

Application purpose:

  • For fixings in industrial areas
  • For fastening of drinking water and heating pipes
  • For indoor use

Advantages:

  • Proven two-part clamp
  • High rigidity thanks to reinforcing rib
  • 2 fastening screws provide a better fit for larger deviations from the pipe diameter
  • Cross-head fastening screws are suitable for working with a screwdriver
  • With highly elastic insert
  • Confident connection due to the rounded flange
  • Reinforcing rib provide secure installation and prevent slippage
Connecting thread For pipe outer DN B b1 H H1 V
mm mm mm mm mm mm mm
M8-M10 119-123 162,0 23 84,0 151 M6
EURO-QUICK Pipe clamp, J type, with highly elastic insert, galvanised, M8/M10, d 4'' (124-130 mm) [Code number: 153900]
Details
153900

Application purpose:

  • For fixings in industrial areas
  • For fastening of drinking water and heating pipes
  • For indoor use

Advantages:

  • Proven two-part clamp
  • High rigidity thanks to reinforcing rib
  • 2 fastening screws provide a better fit for larger deviations from the pipe diameter
  • Cross-head fastening screws are suitable for working with a screwdriver
  • With highly elastic insert
  • Confident connection due to the rounded flange
  • Reinforcing rib provide secure installation and prevent slippage
Connecting thread For pipe outer DN B b1 H H1 V
mm mm mm mm mm mm mm
M8-M10 124-130 176,0 23 87,0 157 M8
EURO-QUICK Pipe clamp, J type, with highly elastic insert, galvanised, M8/M10, d 5'' (159-163 mm) [Code number: 153905]
Details
153905 357 rub

Application purpose:

  • For fixings in industrial areas
  • For fastening of drinking water and heating pipes
  • For indoor use

Advantages:

  • Proven two-part clamp
  • High rigidity thanks to reinforcing rib
  • 2 fastening screws provide a better fit for larger deviations from the pipe diameter
  • Cross-head fastening screws are suitable for working with a screwdriver
  • With highly elastic insert
  • Confident connection due to the rounded flange
  • Reinforcing rib provide secure installation and prevent slippage
Connecting thread For pipe outer DN B b1 H H1 V
mm mm mm mm mm mm mm
M8-M10 159-163 217,0 28 107,0 197 M8
EURO-QUICK Pipe clamp, J type, with highly elastic insert, galvanised, M8/M10, d 8" (212-222 mm) [Code number: 153911]
Details
153911

Application purpose:

  • For fixings in industrial areas
  • For fastening of drinking water and heating pipes
  • For indoor use

Advantages:

  • Proven two-part clamp
  • High rigidity thanks to reinforcing rib
  • 2 fastening screws provide a better fit for larger deviations from the pipe diameter
  • Cross-head fastening screws are suitable for working with a screwdriver
  • With highly elastic insert
  • Confident connection due to the rounded flange
  • Reinforcing rib provide secure installation and prevent slippage
Connecting thread For pipe outer DN B b1 H H1 V
mm mm mm mm mm mm mm
M8-M10 212-222 275,0 28 135,0 257 M8
EURO-QUICK Pipe clamp, J type, with highly elastic insert, galvanised, M8/M10, d 8" (223-233 mm) [Code number: 153912]
Details
153912

Application purpose:

  • For fixings in industrial areas
  • For fastening of drinking water and heating pipes
  • For indoor use

Advantages:

  • Proven two-part clamp
  • High rigidity thanks to reinforcing rib
  • 2 fastening screws provide a better fit for larger deviations from the pipe diameter
  • Cross-head fastening screws are suitable for working with a screwdriver
  • With highly elastic insert
  • Confident connection due to the rounded flange
  • Reinforcing rib provide secure installation and prevent slippage
Connecting thread For pipe outer DN B b1 H H1 V
mm mm mm mm mm mm mm
M8-M10 223-233 285,0 28 141,0 264 M8
EURO-QUICK Pipe clamp, J type, with highly elastic insert, galvanised, M8/M10, d 8" (234-244 mm) [Code number: 153913]
Details
153913

Application purpose:

  • For fixings in industrial areas
  • For fastening of drinking water and heating pipes
  • For indoor use

Advantages:

  • Proven two-part clamp
  • High rigidity thanks to reinforcing rib
  • 2 fastening screws provide a better fit for larger deviations from the pipe diameter
  • Cross-head fastening screws are suitable for working with a screwdriver
  • With highly elastic insert
  • Confident connection due to the rounded flange
  • Reinforcing rib provide secure installation and prevent slippage
Connecting thread For pipe outer DN B b1 H H1 V
mm mm mm mm mm mm mm
M8-M10 234-244 294,0 28 146,0 275 M8
EURO-QUICK Pipe clamp, J type, with highly elastic insert, galvanised, M8/M10, d 8" (245-255 mm) [Code number: 153914]
Details
153914

Application purpose:

  • For fixings in industrial areas
  • For fastening of drinking water and heating pipes
  • For indoor use

Advantages:

  • Proven two-part clamp
  • High rigidity thanks to reinforcing rib
  • 2 fastening screws provide a better fit for larger deviations from the pipe diameter
  • Cross-head fastening screws are suitable for working with a screwdriver
  • With highly elastic insert
  • Confident connection due to the rounded flange
  • Reinforcing rib provide secure installation and prevent slippage
Connecting thread For pipe outer DN B b1 H H1 V
mm mm mm mm mm mm mm
M8-M10 245-255 305,0 28 151,0 286 M8
EURO-QUICK Pipe clamp, J type, with highly elastic insert, galvanised, M8/M10, d 8" (256-266 mm) [Code number: 153915]
Details
153915

Application purpose:

  • For fixings in industrial areas
  • For fastening of drinking water and heating pipes
  • For indoor use

Advantages:

  • Proven two-part clamp
  • High rigidity thanks to reinforcing rib
  • 2 fastening screws provide a better fit for larger deviations from the pipe diameter
  • Cross-head fastening screws are suitable for working with a screwdriver
  • With highly elastic insert
  • Confident connection due to the rounded flange
  • Reinforcing rib provide secure installation and prevent slippage
Connecting thread For pipe outer DN B b1 H H1 V
mm mm mm mm mm mm mm
M8-M10 256-266 314,0 28 157,0 298 M8
Single bossed clamp, heavy-duty version, with highly elastic insert, DGL, M12, d 102 mm (99-103mm)
Details
121934 1 144 rub

Application purpose:

  • For pipelines with dynamic loads in combination with expansion points
  • For fixings in industrial areas
  • For fixings in air conditioning, ventilation and sanitary areas
  • For indoor use

Advantages:

  • Proven two-part clamp with increased material cross-section
  • Stronger tightening bolts for high load capacity
  • DÄMMGULAST® vibration control lining with yellow identification stripe: average sound level improvement up to 22 dB(A)
Connecting thread Clamping range b x s B b1 H1 H V
mm mm mm mm mm mm mm mm
M12 99–103 30 x 3.0 170 34 134 75 M10
Single bossed clamp, heavy-duty version, with highly elastic insert, DGL, M12, d 4" (108-118mm) [Code number: 122353]
Details
122353 1 245 rub

Application purpose:

  • For pipelines with dynamic loads in combination with expansion points
  • For fixings in industrial areas
  • For fixings in air conditioning, ventilation and sanitary areas
  • For indoor use

Advantages:

  • Proven two-part clamp with increased material cross-section
  • Stronger tightening bolts for high load capacity
  • DÄMMGULAST® vibration control lining with yellow identification stripe: average sound level improvement up to 22 dB(A)
Connecting thread Clamping range b x s B b1 H1 H V
mm mm mm mm mm mm mm mm
M12 108–118 30 x 3.0 184 34 149 82 M10
Single bossed clamp, heavy-duty version, with highly elastic insert, DGL, M12, d 125 mm (121-127 mm) [Code number: 121998]
Details
121998

Application purpose:

  • For pipelines with dynamic loads in combination with expansion points
  • For fixings in industrial areas
  • For fixings in air conditioning, ventilation and sanitary areas
  • For indoor use

Advantages:

  • Proven two-part clamp with increased material cross-section
  • Stronger tightening bolts for high load capacity
  • DÄMMGULAST® vibration control lining with yellow identification stripe: average sound level improvement up to 22 dB(A)
Connecting thread Clamping range b x s B b1 H1 H V
mm mm mm mm mm mm mm mm
M12 121–127 40 x 4.0 204 46 160 88 M10
Single bossed clamp, heavy-duty version, with highly elastic insert, DGL, M12, d 133 mm (133-137mm) [Code number: 122018]
Details
122018 1 727 rub

Application purpose:

  • For pipelines with dynamic loads in combination with expansion points
  • For fixings in industrial areas
  • For fixings in air conditioning, ventilation and sanitary areas
  • For indoor use

Advantages:

  • Proven two-part clamp with increased material cross-section
  • Stronger tightening bolts for high load capacity
  • DÄMMGULAST® vibration control lining with yellow identification stripe: average sound level improvement up to 22 dB(A)
Connecting thread Clamping range b x s B b1 H1 H V
mm mm mm mm mm mm mm mm
M12 133–141 40 x 4.0 212 46 176 95 M10
Single bossed clamp, heavy-duty version, with highly elastic insert, DGL, M12, d 5" (138-144mm) [Code number: 122429]
Details
122429 1 820 rub

Application purpose:

  • For pipelines with dynamic loads in combination with expansion points
  • For fixings in industrial areas
  • For fixings in air conditioning, ventilation and sanitary areas
  • For indoor use

Advantages:

  • Proven two-part clamp with increased material cross-section
  • Stronger tightening bolts for high load capacity
  • DÄMMGULAST® vibration control lining with yellow identification stripe: average sound level improvement up to 22 dB(A)
Connecting thread Clamping range b x s B b1 H1 H V
mm mm mm mm mm mm mm mm
M12 138–144 40 x 4.0 217 46 177 96 M10
Single bossed clamp, heavy-duty version, with highly elastic insert, DGL, M12, d 160 mm (159-165mm) [Code number: 122052]
Details
122052 1 888 rub

Application purpose:

  • For pipelines with dynamic loads in combination with expansion points
  • For fixings in industrial areas
  • For fixings in air conditioning, ventilation and sanitary areas
  • For indoor use

Advantages:

  • Proven two-part clamp with increased material cross-section
  • Stronger tightening bolts for high load capacity
  • DÄMMGULAST® vibration control lining with yellow identification stripe: average sound level improvement up to 22 dB(A)
Connecting thread Clamping range b x s B b1 H1 H V
mm mm mm mm mm mm mm mm
M12 159–168 40 x 4.0 235 46 195 105 M10
Single bossed clamp, heavy-duty version, with highly elastic insert, DGL, M12, d 6" (164-170mm) [Code number: 122473]
Details
122473 1 934 rub

Application purpose:

  • For pipelines with dynamic loads in combination with expansion points
  • For fixings in industrial areas
  • For fixings in air conditioning, ventilation and sanitary areas
  • For indoor use

Advantages:

  • Proven two-part clamp with increased material cross-section
  • Stronger tightening bolts for high load capacity
  • DÄMMGULAST® vibration control lining with yellow identification stripe: average sound level improvement up to 22 dB(A)
Connecting thread Clamping range b x s B b1 H1 H V
mm mm mm mm mm mm mm mm
M12 164–170 40 x 4.0 242 46 204 109 M10
Single bossed clamp, heavy-duty version, with highly elastic insert, DGL, M12, d 200 mm (193-203mm) [Code number: 122123]
Details
122123 2 636 rub

Application purpose:

  • For pipelines with dynamic loads in combination with expansion points
  • For fixings in industrial areas
  • For fixings in air conditioning, ventilation and sanitary areas
  • For indoor use

Advantages:

  • Proven two-part clamp with increased material cross-section
  • Stronger tightening bolts for high load capacity
  • DÄMMGULAST® vibration control lining with yellow identification stripe: average sound level improvement up to 22 dB(A)
Connecting thread Clamping range b x s B b1 H1 H V
mm mm mm mm mm mm mm mm
M12 193–203 40 x 4.0 280 46 235 125 M10
Single bossed clamp, heavy-duty version, with highly elastic insert, DGL, M12, d 212 mm (208-214mm) [Code number: 122151]
Details
122151 2 606 rub

Application purpose:

  • For pipelines with dynamic loads in combination with expansion points
  • For fixings in industrial areas
  • For fixings in air conditioning, ventilation and sanitary areas
  • For indoor use

Advantages:

  • Proven two-part clamp with increased material cross-section
  • Stronger tightening bolts for high load capacity
  • DÄMMGULAST® vibration control lining with yellow identification stripe: average sound level improvement up to 22 dB(A)
Connecting thread Clamping range b x s B b1 H1 H V
mm mm mm mm mm mm mm mm
M12 208–214 40 x 4.0 299 46 245 130 M10
Single bossed clamp, heavy-duty version, with highly elastic insert, DGL, M12, d 219 mm (217-224mm) [Code number: 122167]
Details
122167 2 860 rub

Application purpose:

  • For pipelines with dynamic loads in combination with expansion points
  • For fixings in industrial areas
  • For fixings in air conditioning, ventilation and sanitary areas
  • For indoor use

Advantages:

  • Proven two-part clamp with increased material cross-section
  • Stronger tightening bolts for high load capacity
  • DÄMMGULAST® vibration control lining with yellow identification stripe: average sound level improvement up to 22 dB(A)
Connecting thread Clamping range b x s B b1 H1 H V
mm mm mm mm mm mm mm mm
M12 217–224 40 x 4.0 302 46 257 136 M10
Single bossed clamp, heavy-duty version, with highly elastic insert, DGL, M12, d 250 mm (244-254mm) [Code number: 122214]
Details
122214 3 009 rub

Application purpose:

  • For pipelines with dynamic loads in combination with expansion points
  • For fixings in industrial areas
  • For fixings in air conditioning, ventilation and sanitary areas
  • For indoor use

Advantages:

  • Proven two-part clamp with increased material cross-section
  • Stronger tightening bolts for high load capacity
  • DÄMMGULAST® vibration control lining with yellow identification stripe: average sound level improvement up to 22 dB(A)
Connecting thread Clamping range b x s B b1 H1 H V
mm mm mm mm mm mm mm mm
M12 244–254 40 x 4.0 330 46 285 148 M10
Single bossed clamp, heavy-duty version, with highly elastic insert, DGL, M12, d 267 mm (267-277mm) [Code number: 122234 (M)]
Details
122234 (M) 3 614 rub

Application purpose:

  • For pipelines with dynamic loads in combination with expansion points
  • For fixings in industrial areas
  • For fixings in air conditioning, ventilation and sanitary areas
  • For indoor use

Advantages:

  • Proven two-part clamp with increased material cross-section
  • Stronger tightening bolts for high load capacity
  • DÄMMGULAST® vibration control lining with yellow identification stripe: average sound level improvement up to 22 dB(A)
Connecting thread Clamping range b x s B b1 H1 H V
mm mm mm mm mm mm mm mm
M12 267–277 40 x 4.0 360 46 311 163 M10
Single bossed clamp, heavy-duty version, with highly elastic insert, DGL, M12, d 280 mm (278-282mm) [Code number: 122250]
Details
122250 4 051 rub

Application purpose:

  • For pipelines with dynamic loads in combination with expansion points
  • For fixings in industrial areas
  • For fixings in air conditioning, ventilation and sanitary areas
  • For indoor use

Advantages:

  • Proven two-part clamp with increased material cross-section
  • Stronger tightening bolts for high load capacity
  • DÄMMGULAST® vibration control lining with yellow identification stripe: average sound level improvement up to 22 dB(A)
Connecting thread Clamping range b x s B b1 H1 H V
mm mm mm mm mm mm mm mm
M12 278–282 40 x 4.0 360 46 315 165 M10
Single bossed clamp, heavy-duty version, with highly elastic insert, DGL, M12, d 315 mm (313-318mm) [Code number: 122294]
Details
122294 4 339 rub

Application purpose:

  • For pipelines with dynamic loads in combination with expansion points
  • For fixings in industrial areas
  • For fixings in air conditioning, ventilation and sanitary areas
  • For indoor use

Advantages:

  • Proven two-part clamp with increased material cross-section
  • Stronger tightening bolts for high load capacity
  • DÄMMGULAST® vibration control lining with yellow identification stripe: average sound level improvement up to 22 dB(A)
Connecting thread Clamping range b x s B b1 H1 H V
mm mm mm mm mm mm mm mm
M12 313–318 40 x 4.0 394 46 350 183 M10
Single bossed clamp, heavy-duty version, with highly elastic insert, DGL, M12, d 323 mm (320-326mm) [Code number: 122305]
Details
122305 5 866 rub

Application purpose:

  • For pipelines with dynamic loads in combination with expansion points
  • For fixings in industrial areas
  • For fixings in air conditioning, ventilation and sanitary areas
  • For indoor use

Advantages:

  • Proven two-part clamp with increased material cross-section
  • Stronger tightening bolts for high load capacity
  • DÄMMGULAST® vibration control lining with yellow identification stripe: average sound level improvement up to 22 dB(A)
Connecting thread Clamping range b x s B b1 H1 H V
mm mm mm mm mm mm mm mm
M12 320–326 50 x 5.0 415 56 360 188 M12
EURO-QUICK Pipe clamp, J type, with highly elastic insert, galvanised, M8/M10, d 4'' (132-137 mm) [Code number: 153901]
Details
153901

Application purpose:

  • For fixings in industrial areas
  • For fastening of drinking water and heating pipes
  • For indoor use

Advantages:

  • Proven two-part clamp
  • High rigidity thanks to reinforcing rib
  • 2 fastening screws provide a better fit for larger deviations from the pipe diameter
  • Cross-head fastening screws are suitable for working with a screwdriver
  • With highly elastic insert
  • Confident connection due to the rounded flange
  • Reinforcing rib provide secure installation and prevent slippage
Connecting thread For pipe outer DN B b1 H H1 V
mm mm mm mm mm mm mm
M8-M10 132-137 184,0 23 91,0 165 M8
EURO-QUICK Pipe clamp, J type, with highly elastic insert, galvanised, M8/M10, d 6'' (169-176 mm) [Code number: 153907]
Details
153907

Application purpose:

  • For fixings in industrial areas
  • For fastening of drinking water and heating pipes
  • For indoor use

Advantages:

  • Proven two-part clamp
  • High rigidity thanks to reinforcing rib
  • 2 fastening screws provide a better fit for larger deviations from the pipe diameter
  • Cross-head fastening screws are suitable for working with a screwdriver
  • With highly elastic insert
  • Confident connection due to the rounded flange
  • Reinforcing rib provide secure installation and prevent slippage
Connecting thread For pipe outer DN B b1 H H1 V
mm mm mm mm mm mm mm
M8-M10 169-176 230,0 28 112,0 208 M8
EURO-QUICK Pipe clamp, J type, with highly elastic insert, galvanised, M8/M10, d 4" (108-115 mm) [Code number: 153897]
Details
153897 180 rub

Application purpose:

  • For fixings in industrial areas
  • For fastening of drinking water and heating pipes
  • For indoor use

Advantages:

  • Proven two-part clamp
  • High rigidity thanks to reinforcing rib
  • 2 fastening screws provide a better fit for larger deviations from the pipe diameter
  • Cross-head fastening screws are suitable for working with a screwdriver
  • With highly elastic insert
  • Confident connection due to the rounded flange
  • Reinforcing rib provide secure installation and prevent slippage
Connecting thread For pipe outer DN B b1 H H1 V
mm mm mm mm mm mm mm
M8-M10 108-115 152,0 23 79,0 141 M6
EURO-QUICK Pipe clamp, J type, with highly elastic insert, galvanised, M8/M10, d 3/8" (15-20 mm) [Code number: 153884]
Details
153884

Application purpose:

  • For fixings in industrial areas
  • For fastening of drinking water and heating pipes
  • For indoor use

Advantages:

  • Proven two-part clamp
  • High rigidity thanks to reinforcing rib
  • 2 fastening screws provide a better fit for larger deviations from the pipe diameter
  • Cross-head fastening screws are suitable for working with a screwdriver
  • With highly elastic insert
  • Confident connection due to the rounded flange
  • Reinforcing rib provide secure installation and prevent slippage
Connecting thread For pipe outer DN B b1 H H1 V
mm mm mm mm mm mm mm
M8-M10 15-20 52,5 21 35,5 50 M6

See also