Logo
Ru| En
Loading

PVC pressure pipe system Wavin

Wavin pressure pipe system is made of unplasticized polyvinylchlorid (PVC). It have several of advantages over other pipe systems:

  • Low weight;
  • High durability;
  • Resistant to corrosion and electrical corrosion;
  • High hydraulic properties - the friction coefficient of PVC pipes and fittings to 100-600 times lower than that of cast iron pipes;
  • Installation is easy;
  • You can use mobile connection devices with the rubber O-rings when mounting;
  • The O-rings is used only with durable silicone lubricant;
  • No need to care for the pipeline.

Wavin pressure pipe system can be used not only for transporting of liquids and gaseous substances. The pipes and fittings are resistant to effects of more than 500 different chemical compounds, incl. acids and alcohols.

Impact strength of the PVC pipes and fittings begin to decline at long influence of UV light, so you will need paint the PVC pipeline if you can not protect the pipeline from influence of ultraviolet radiation.

Pipes of Wavin pressure system are made of PVC-U, and the pipes are installed easy and conveniently. The pipes vary in diameter which ranges from 63 to 315 mm. The pipes with a small diameter are c...
Bends of Wavin PVC-U pressure system are used when installation of pipe systems and they are designed for change direction of pipeline. The Wavin Company produces elbows and bends with angle from 1...
T-pieces of Wavin PVC-U pressure system are intended for connecting several pipe branches into the one. The connecting can be at angles 90 and 45 degrees. The T-pieces are made of PVC-U - this m...
Cross pieces of Wavin pressure system are made of PVC-U, so that they are easy, durable, reliable and simple to install. The cross pieces are used for unification several branches in the one pipeli...
Reducers of Wavin PVC-U pressure system are used for connection of pipes and fittings. There are several types of the Wavin PVC-U pressure system reducers: Reducing sockets - they connect the...
Sleeves are used for connection of Wavin pressure system pipes and fittings. The sleeves are made of PVC-U, and they are characterised by durable, light weight and high strength. There are sever...
Flanges are used for Wavin PVC-U pressure system, and they are connected pipe to pipe or pipe to flange fitting. The group of products includes: Flanges assembly; Flange adapters; One-...
When mounting pressure pipeline systems you need use special connection elements. There are several types of the connection elements: Clamping collars made of PP. They have male thread or the...
End caps are installed on dead-end areas of Wavin PVC-U pressure system. The group of products includes: End caps made of UPVC with operating pressure of 16 bar; Threaded pipe cap with oper...
The group of products includes: Circle seal with flat section of EPDM; Gaskets for caps made of EPDM; Ball valve with operating pressure up to 10 bar.