Logo
Ru| En
Loading

VIEGA Press jaws

Press jaws and ring sets are used for maximum reliability and tightness of the press junctions. Press jaws with turn of 180° allow to mount press system even in hard-to-reach places.

They are made of specially hardened steel, so they can withstand high loads.

The pressing is made very quickly - only few seconds are required for pressing the fitting or pipe. In this case, only three actions are required before pressing: cut the pipe to required length, insert press fitting and check depth of the insert. The total savings in time when using a press-systems is 30-50% compared to soldering..

Photo Наименование Article Цена
VIEGA Press jaw set, d 12-35 [Code number: 313012]
Details
313012

Application purpose:

  • For metallic press connector systems

Characteristics:

  • PT2
  • recommended for press machines type 2 (PT2), PT3-H, PT3-AH, PT3-EH and Pressgun 4E, 4B and 5, battery-​powered press machine manufactured by Holger Clasen, Geberit/Mepla press machines type PWH 75, type N 230 V and type N battery, Geberit/Mapress press machines type EFP II, ACO 1, ECO 1, ACO 201, ECO 201, AFP 201, EFP 201, ACO 202 and ECO 202, Ridgid press machines RP 10‑S, RP 10‑B, RP 330C/330B, RP 340C and RP 340B

for d: 12–35

Quantity per set: 6

VIEGA Press chain, d 88,9 [Code number: 359256]
Details
359256 168 375 rub

Application purpose:

  • For Sanpress XL bronze fittings

Characteristics:

  • PT2
  • not suitable for: Profipress XL, Profipress G XL (copper), Sanpress Inox XL, Sanpress Inox G XL (stainless steel), Prestabo XL
  • Use only with the following products: Press sponge PT2
  • phosphatised steel

for d: 88,9

VIEGA Press jaw for plastic pipe systems, d 16 [Code number: 425319]
Details
425319 27 479 rub

Application purpose:

  • For plastic pipe systems

Characteristics:

  • PT2
  • recommended for press machines type 2 (PT2), PT3-H, PT3-AH, PT3-EH and Pressgun 4E, 4B and 5, battery-​powered press machine manufactured by Holger Clasen, Geberit/Mepla press machines type PWH 75, type N 230 V and type N battery, Geberit/Mapress press machines type EFP II, ACO 1, ECO 1, ACO 201, ECO 201, AFP 201, EFP 201, ACO 202 and ECO 202, Ridgid press machines RP 10‑S, RP 10‑B, RP 330C/330B, RP 340C and RP 340B
  • phosphatised steel
VS PX
mm mm
16 16

VS - для Viega Smartpress

РХ - для пресс-фитингов Pexfit Pro

VIEGA Press jaw for plastic pipe systems, PT2, d 20 [Code number: 425326]
Details
425326 27 479 rub
VIEGA Press jaw, d 14/15 [Code number: 439064]
Details
439064 26 481 rub

Application purpose:

  • For plastic piping systems

Characteristics:

  • PT2
  • recommended for press machines type 2 (PT2), PT3-H, PT3-AH, PT3-EH and Pressgun 4E, 4B and 5, battery-​powered press machine manufactured by Holger Clasen, Geberit/Mepla press machines type PWH 75, type N 230 V and type N battery, Geberit/Mapress press machines type EFP II, ACO 1, ECO 1, ACO 201, ECO 201, AFP 201, EFP 201, ACO 202 and ECO 202, Ridgid press machines RP 10‑S, RP 10‑B, RP 330C/330B, RP 340C and RP 340B
  • phosphatised steel

for d: 14/15

VIEGA Press jaw for plastic pipe systems, d 25 [Code number: 446192]
Details
446192 27 479 rub

Application purpose:

  • For plastic pipe systems

Characteristics:

  • PT2
  • recommended for press machines type 2 (PT2), PT3-H, PT3-AH, PT3-EH and Pressgun 4E, 4B and 5, battery-​powered press machine manufactured by Holger Clasen, Geberit/Mepla press machines type PWH 75, type N 230 V and type N battery, Geberit/Mapress press machines type EFP II, ACO 1, ECO 1, ACO 201, ECO 201, AFP 201, EFP 201, ACO 202 and ECO 202, Ridgid press machines RP 10‑S, RP 10‑B, RP 330C/330B, RP 340C and RP 340B
  • phosphatised steel
VS PX
mm mm
25 25

VS - для Viega Smartpress

РХ - для пресс-фитингов Pexfit Pro

VIEGA Press jaw for metallic press connector systems, PT2, d 12 [Code number: 461881]
Details
461881 30 761 rub
VIEGA Press jaw, d 15 [Code number: 461898]
Details
461898 30 761 rub

Application purpose:

  • For metallic press connector systems

Characteristics:

  • PT2
  • recommended for press machines type 2 (PT2), PT3-H, PT3-AH, PT3-EH and Pressgun 4E, 4B and 5, battery-​powered press machine manufactured by Holger Clasen, Geberit/Mepla press machines type PWH 75, type N 230 V and type N battery, Geberit/Mapress press machines type EFP II, ACO 1, ECO 1, ACO 201, ECO 201, AFP 201, EFP 201, ACO 202 and ECO 202, Ridgid press machines RP 10‑S, RP 10‑B, RP 330C/330B, RP 340C and RP 340B
  • phosphatised steel

for d: 15

VIEGA Press jaw, d 18 [Code number: 461904]
Details
461904 30 761 rub

Application purpose:

  • For metallic press connector systems

Characteristics:

  • PT2
  • recommended for press machines type 2 (PT2), PT3-H, PT3-AH, PT3-EH and Pressgun 4E, 4B and 5, battery-​powered press machine manufactured by Holger Clasen, Geberit/Mepla press machines type PWH 75, type N 230 V and type N battery, Geberit/Mapress press machines type EFP II, ACO 1, ECO 1, ACO 201, ECO 201, AFP 201, EFP 201, ACO 202 and ECO 202, Ridgid press machines RP 10‑S, RP 10‑B, RP 330C/330B, RP 340C and RP 340B
  • phosphatised steel

for d: 18

VIEGA Press jaw, d 22 [Code number: 461911]
Details
461911 30 761 rub

Application purpose:

  • For metallic press connector systems

Characteristics:

  • PT2
  • recommended for press machines type 2 (PT2), PT3-H, PT3-AH, PT3-EH and Pressgun 4E, 4B and 5, battery-​powered press machine manufactured by Holger Clasen, Geberit/Mepla press machines type PWH 75, type N 230 V and type N battery, Geberit/Mapress press machines type EFP II, ACO 1, ECO 1, ACO 201, ECO 201, AFP 201, EFP 201, ACO 202 and ECO 202, Ridgid press machines RP 10‑S, RP 10‑B, RP 330C/330B, RP 340C and RP 340B
  • phosphatised steel

for d: 22

VIEGA Press jaw, d 28 [Code number: 461928]
Details
461928 30 761 rub

Application purpose:

  • For metallic press connector systems

Characteristics:

  • PT2
  • recommended for press machines type 2 (PT2), PT3-H, PT3-AH, PT3-EH and Pressgun 4E, 4B and 5, battery-​powered press machine manufactured by Holger Clasen, Geberit/Mepla press machines type PWH 75, type N 230 V and type N battery, Geberit/Mapress press machines type EFP II, ACO 1, ECO 1, ACO 201, ECO 201, AFP 201, EFP 201, ACO 202 and ECO 202, Ridgid press machines RP 10‑S, RP 10‑B, RP 330C/330B, RP 340C and RP 340B
  • phosphatised steel

for d: 28

VIEGA Press jaw, d 35 [Code number: 461935]
Details
461935 34 074 rub

Application purpose:

  • For metallic press connector systems

Characteristics:

  • PT2
  • recommended for press machines type 2 (PT2), PT3-H, PT3-AH, PT3-EH and Pressgun 4E, 4B and 5, battery-​powered press machine manufactured by Holger Clasen, Geberit/Mepla press machines type PWH 75, type N 230 V and type N battery, Geberit/Mapress press machines type EFP II, ACO 1, ECO 1, ACO 201, ECO 201, AFP 201, EFP 201, ACO 202 and ECO 202, Ridgid press machines RP 10‑S, RP 10‑B, RP 330C/330B, RP 340C and RP 340B
  • phosphatised steel

for d: 35

VIEGA Press ring for metallic press connector systems, d 15 [Code number: 472665]
Details
472665 18 583 rub
VIEGA Press ring for metallic press connector systems, d 18 [Code number: 472672]
Details
472672 18 583 rub

Application purpose:

  • For metallic press connector systems

Characteristics:

  • Picco, PT2
  • suitable for Hinged adapter jaw P1,Picco article 622 657, Hinged adapter jaw PT2 article 472 733
  • phosphatised steel
HAJ for d
  mm
P1/Z1 18

HAJ - for hinged adapter jaw

VIEGA Press ring for metallic press connector systems, d 35 [Code number: 472702]
Details
472702 21 934 rub

Application purpose:

  • For metallic press connector systems

Characteristics:

  • Picco, PT2
  • suitable for Hinged adapter jaw P1,Picco article 622 657, Hinged adapter jaw PT2 article 472 733
  • phosphatised steel
HAJ for d
  mm
P1/Z1 35

HAJ - for hinged adapter jaw

VIEGA Press ring for metallic press connector systems, d 54 [Code number: 472726]
Details
472726 53 678 rub

Application purpose:

  • For metallic press connector systems

Characteristics:

  • Picco, PT2
  • suitable for Hinged adapter jaw PT2 article 472 740
  • phosphatised steel
HAJ for d
  mm
Z2 54

HAJ - for hinged adapter jaw

VIEGA Hinged adapter jaw Z1, d 12-35 [Code number: 472733]
Details
472733 30 940 rub
VIEGA Hinged adapter jaw, d 42–108,0 [Code number: 472740]
Details
472740 60 867 rub

Application purpose:

  • For Viega system press rings

Characteristics:

  • PT2
  • recommended for press machines type 2 (PT2), PT3-H, PT3-AH, PT3-EH and Pressgun 4E, 4B and 5, battery-​powered press machine manufactured by Holger Clasen, Geberit/Mepla press machines type PWH 75, type N 230 V and type N battery, Geberit/Mapress press machines type EFP II, ACO 1, ECO 1, ACO 201, ECO 201, AFP 201, EFP 201, ACO 202 and ECO 202, Ridgid press machines RP 10‑S, RP 10‑B, RP 330C/330B, RP 340C and RP 340B
  • not suitable for Sanpress XL (silicon bronze)
  • phosphatised steel

Note:

  • Work in the ground should be carried out using the adapted battery-​powered press machine!
type PMP MP
  mm  
Z2 42–108,0 1 1/4 – 2

PMP - for press connectors of the metallic press systems

MP - for Megapress

VIEGA Press ring set, d 42-54 [Code number: 472764]
Details
472764 141 038 rub

Application purpose:

  • For metallic press connector systems

Characteristics:

  • PT2
  • recommended for press machines type 2 (PT2), PT3-H, PT3-AH, PT3-EH and Pressgun 4E, 4B and 5, battery-​powered press machine manufactured by Holger Clasen, Geberit/Mepla press machines type PWH 75, type N 230 V and type N battery, Geberit/Mapress press machines type EFP II, ACO 1, ECO 1, ACO 201, ECO 201, AFP 201, EFP 201, ACO 202 and ECO 202, Ridgid press machines RP 10‑S, RP 10‑B, RP 330C/330B, RP 340C and RP 340B
  • phosphatised steel

Components:

  • case
HAJ for d
  mm
Z2 42–54

HAJ - for hinged adapter jaw

VIEGA Press jaw for press machines Picco, d 18 [Code number: 485528]
Details
485528 21 679 rub

See also