Valtec clamps and clips

For effective fastening of the pipeline, special fasteners are used - clamps and clips from Valtec.

These fastenings ensure reliable fixation of the pipe and prevent it from falling out under various operating conditions of the system.

Plastic supports (clips) Valtec are made of high quality primary polypropylene - this material is not afraid of high temperatures. The clips can be used repeatedly.

Photo	Name	Article	Price
Photo	VALTEC Clip, plastic (М), d - 16 mm (Russia) [Code number: OSKM.16] Details	OSKM.16	3 rub
Purpose of application: For fixing pipes For pipelines made of various materials For pipelines for various purposes Characteristics: made of polypropylene (PP); White. Brackets perform the function of a movable support. The size indicates the outside diameter of the pipe. Size: 16 mm.
Photo	VALTEC Clip, plastic (М), d - 20 mm (Russia) [Code number: OSKM.20] Details	OSKM.20	3 rub
Purpose of application: For fixing pipes For pipelines made of various materials For pipelines for various purposes Characteristics: made of polypropylene (PP); White. Brackets perform the function of a movable support. The size indicates the outside diameter of the pipe. Size: 20 mm.
Photo	VALTEC Clip, plastic (М), d - 26 mm (Russia) [Code number: OSKM.26] Details	OSKM.26	5 rub
Purpose of application: For fixing pipes For pipelines made of various materials For pipelines for various purposes Characteristics: made of polypropylene (PP); White. Brackets perform the function of a movable support. The size indicates the outside diameter of the pipe. Size: 26 mm.
Photo	VALTEC Clip, plastic, d - 32 mm (Russia) [Code number: OSKM.32] Details	OSKM.32	6 rub
Purpose of application: For fixing pipes For pipelines made of various materials For pipelines for various purposes Characteristics: made of polypropylene (PP); White. Brackets perform the function of a movable support. The size indicates the outside diameter of the pipe. Size: 32 mm.
Photo	VALTEC Clip, plastic (М), d - 40 mm (Russia) [Code number: OSKM.40] Details	OSKM.40	8 rub
Purpose of application: For fixing pipes For pipelines made of various materials For pipelines for various purposes Characteristics: made of polypropylene (PP); White. Brackets perform the function of a movable support. The size indicates the outside diameter of the pipe. Size: 40 mm.
Photo 1 2	VALTEC Clamp with rubber seal, with stud, d - 3/8" (15-19mm) [Code number: RH.03] Details	RH.03	32 rub
Purpose of application: For fixing pipes on vertical and horizontal surfaces For hot and cold water systems For heating and drainage systems For gas pipelines Characteristics: is a circle, consisting of two parts, with screw ties and a nut; the upper and lower parts are made of carbon steel (has a zinc coating with a thickness of 8-12 microns, which protects it from corrosion); the gasket is made of EPDM elastomer - it is UV resistant and reduces noise and vibration levels, and the gasket is also needed to compensate for thermal expansion; the set comes with a stud-screw, the size of which is M8x80 mm or M10x100 mm (depending on the diameter of the clamp), and a plastic dowel. Size: 3/8" (15-19 mm)
Photo 1 2	VALTEC Clamp with rubber seal, with stud, d - 1/2" (20-24 mm) [Code number: RH.04] Details	RH.04	34 rub
Purpose of application: For fixing pipes on vertical and horizontal surfaces For hot and cold water systems For heating and drainage systems For gas pipelines Characteristics: is a circle, consisting of two parts, with screw ties and a nut; the upper and lower parts are made of carbon steel (has a zinc coating with a thickness of 8-12 microns, which protects it from corrosion); the gasket is made of EPDM elastomer - it is UV resistant and reduces noise and vibration levels, and the gasket is also needed to compensate for thermal expansion; the set comes with a stud-screw, the size of which is M8x80 mm or M10x100 mm (depending on the diameter of the clamp), and a plastic dowel. Size: 1/2" (20-24 mm)
Photo 1 2	VALTEC Clamp with rubber seal, with stud, d - 3/4" (23-28 mm) [Code number: RH.05] Details	RH.05	35 rub
Purpose of application: For fixing pipes on vertical and horizontal surfaces For hot and cold water systems For heating and drainage systems For gas pipelines Characteristics: is a circle, consisting of two parts, with screw ties and a nut; the upper and lower parts are made of carbon steel (has a zinc coating with a thickness of 8-12 microns, which protects it from corrosion); the gasket is made of EPDM elastomer - it is UV resistant and reduces noise and vibration levels, and the gasket is also needed to compensate for thermal expansion; the set comes with a stud-screw, the size of which is M8x80 mm or M10x100 mm (depending on the diameter of the clamp), and a plastic dowel. Size: 3/4" (23-28 mm)
Photo 1 2	VALTEC Clamp with rubber seal, with stud, d - 1" (31-36 mm) [Code number: RH.06] Details	RH.06	36 rub
Purpose of application: For fixing pipes on vertical and horizontal surfaces For hot and cold water systems For heating and drainage systems For gas pipelines Characteristics: is a circle, consisting of two parts, with screw ties and a nut; the upper and lower parts are made of carbon steel (has a zinc coating with a thickness of 8-12 microns, which protects it from corrosion); the gasket is made of EPDM elastomer - it is UV resistant and reduces noise and vibration levels, and the gasket is also needed to compensate for thermal expansion; the set comes with a stud-screw, the size of which is M8x80 mm or M10x100 mm (depending on the diameter of the clamp), and a plastic dowel. Size: 1" (31-36 mm)
Photo 1 2	VALTEC Clamp with rubber seal, with stud, d - 1 1/4" (38-44 mm) [Code number: RH.07] Details	RH.07	42 rub
Purpose of application: For fixing pipes on vertical and horizontal surfaces For hot and cold water systems For heating and drainage systems For gas pipelines Characteristics: is a circle, consisting of two parts, with screw ties and a nut; the upper and lower parts are made of carbon steel (has a zinc coating with a thickness of 8-12 microns, which protects it from corrosion); the gasket is made of EPDM elastomer - it is UV resistant and reduces noise and vibration levels, and the gasket is also needed to compensate for thermal expansion; the set comes with a stud-screw, the size of which is M8x80 mm or M10x100 mm (depending on the diameter of the clamp), and a plastic dowel. Size: 1 1/4" (38-44 mm)
Photo 1 2	VALTEC Clamp with rubber seal, with stud, d - 1 1/2" (44-50 mm) [Code number: RH.08] Details	RH.08	45 rub
Purpose of application: For fixing pipes on vertical and horizontal surfaces For hot and cold water systems For heating and drainage systems For gas pipelines Characteristics: is a circle, consisting of two parts, with screw ties and a nut; the upper and lower parts are made of carbon steel (has a zinc coating with a thickness of 8-12 microns, which protects it from corrosion); the gasket is made of EPDM elastomer - it is UV resistant and reduces noise and vibration levels, and the gasket is also needed to compensate for thermal expansion; the set comes with a stud-screw, the size of which is M8x80 mm or M10x100 mm (depending on the diameter of the clamp), and a plastic dowel. Size: 1 1/2" (44-50 mm)
Photo 1 2	VALTEC Clamp with rubber seal, with stud, d - 2" (59-65 mm) [Code number: RH.09] Details	RH.09	49 rub
Purpose of application: For fixing pipes on vertical and horizontal surfaces For hot and cold water systems For heating and drainage systems For gas pipelines Characteristics: is a circle, consisting of two parts, with screw ties and a nut; the upper and lower parts are made of carbon steel (has a zinc coating with a thickness of 8-12 microns, which protects it from corrosion); the gasket is made of EPDM elastomer - it is UV resistant and reduces noise and vibration levels, and the gasket is also needed to compensate for thermal expansion; the set comes with a stud-screw, the size of which is M8x80 mm or M10x100 mm (depending on the diameter of the clamp), and a plastic dowel. Size: 2" (59-65 mm)
Photo 1 2	VALTEC Clamp with rubber seal, with stud, d - 2 1/2" (73-80 mm) [Code number: RH.10] Details	RH.10	70 rub
Purpose of application: For fixing pipes on vertical and horizontal surfaces For hot and cold water systems For heating and drainage systems For gas pipelines Characteristics: is a circle, consisting of two parts, with screw ties and a nut; the upper and lower parts are made of carbon steel (has a zinc coating with a thickness of 8-12 microns, which protects it from corrosion); the gasket is made of EPDM elastomer - it is UV resistant and reduces noise and vibration levels, and the gasket is also needed to compensate for thermal expansion; the set comes with a stud-screw, the size of which is M8x80 mm or M10x100 mm (depending on the diameter of the clamp), and a plastic dowel. Size: 2 1/2" (73-80 mm)
Photo 1 2	VALTEC Clamp with rubber seal, with stud, d - 3" (87-90 mm) [Code number: RH.11] Details	RH.11	75 rub
Purpose of application: For fixing pipes on vertical and horizontal surfaces For hot and cold water systems For heating and drainage systems For gas pipelines Characteristics: is a circle, consisting of two parts, with screw ties and a nut; the upper and lower parts are made of carbon steel (has a zinc coating with a thickness of 8-12 microns, which protects it from corrosion); the gasket is made of EPDM elastomer - it is UV resistant and reduces noise and vibration levels, and the gasket is also needed to compensate for thermal expansion; the set comes with a stud-screw, the size of which is M8x80 mm or M10x100 mm (depending on the diameter of the clamp), and a plastic dowel. Size: 3" (87-90 mm)
Photo 1 2	VALTEC Clamp with rubber seal, with stud, d - 4" (108-114 mm) [Code number: RH.12] Details	RH.12	87 rub
Purpose of application: For fixing pipes on vertical and horizontal surfaces For hot and cold water systems For heating and drainage systems For gas pipelines Characteristics: is a circle, consisting of two parts, with screw ties and a nut; the upper and lower parts are made of carbon steel (has a zinc coating with a thickness of 8-12 microns, which protects it from corrosion); the gasket is made of EPDM elastomer - it is UV resistant and reduces noise and vibration levels, and the gasket is also needed to compensate for thermal expansion; the set comes with a stud-screw, the size of which is M8x80 mm or M10x100 mm (depending on the diameter of the clamp), and a plastic dowel. Size: 4" (108-114 mm)
Photo	VALTEC Steel pipe clamp with rubber seal, 3/8" (15-19mm) [Code number: RUS.833.03] Details	RUS.833.03	51 rub

Photo	VALTEC Steel pipe clamp with rubber seal, 1/2" (20-24mm) [Code number: RUS.833.04] Details	RUS.833.04	53 rub

Photo	VALTEC Steel pipe clamp with rubber seal, 3/4" (25-29mm) [Code number: RUS.833.05] Details	RUS.833.05	56 rub

Photo	VALTEC Steel pipe clamp with rubber seal, 1" (32-37mm) [Code number: RUS.833.06] Details	RUS.833.06	59 rub

Photo	VALTEC Steel pipe clamp with rubber seal, 1 1/4" (40-45mm) [Code number: RUS.833.07] Details	RUS.833.07	71 rub

Valtec clamps and clips

See also