Fluids, dowels, spanners and other components Valtec

Purpose of application:

• For gearbox sizes 1/2" and 3/4"
• To replace O-rings

Characteristics:

• O-rings are made of EPDM;
• Suitable for replacing O-rings of large and small pistons of pressure reducers VT.082.N (VT.515.N), VT.087.N;
• Suitable for replacing sealing rings of the damper chamber, which is available for the membrane pressure regulator VT.085.N.

Advantages of pressure reducers:

• Equipped with additional equipment (for example, pressure gauges);
• Output pressure is easily adjustable;
• Gearboxes are repairable;
• Adjustable parameters are stable;
• Gearboxes can be used in a variety of systems;
• Operating pressure up to 25 bar;
• Operating temperature - up to +80 °С.

Ring sizes

Purpose of application:

• For domestic and drinking water supply systems
• For hot water systems
• For water heating systems (radiator and floor)
• For ground heating
• For process pipelines transporting liquids that are non-aggressive to the materials of the pipe

Characteristics:

• Staples are supplied as cassettes;
• Use with pipes with diameters of 12-20 mm is possible.

Product instruction manual: VALTEC Staples VT.KS.P.1620

Application purpose:

• For leveling water outlets

Characteristics:

• It is a threaded self-sealing plug made of brass with a water level integrated into it;
• Allows you to improve the aesthetics and quality of installation of internal engineering systems;
• Ambient temperature can vary from -25 to +80 ºС;
• Mounting torque up to 10 Nm;
• The thread corresponds to GOST 6357-81;
• Made of brass CW614N;
• O-ring made of EPDM Sh70;
• The level flask is filled with ethylene glycol + glycerin + water;
• Service life: 20 years.

Size: 1/2".

Documentation

Download data sheet: VALTEC Cap for wall-elbows VTr.583.U.0004

Purpose of application:

• For laying pipes under underfloor heating systems

Characteristics:

• facilitates and speeds up the installation of a warm floor, the use of this tool allows you to cope with the task of laying pipes even for one person;
• the tool is a rotating structure on which the bay is installed, on a fixed base;
• made of galvanized steel;
• the unwinder is disassembled and placed in a sturdy bag when disassembled;
• the unwinder is universal, which allows it to be used with any standard size of VALTEC coils;
• the pipe on the unwinder is less prone to creases or tangles.

The uncoiler has a pipe guide attached to one of the fixed legs of the tool - it makes it even easier to unwind the coils.

Product instruction manual: VALTEC Unwinder for pipes VT.RT.01.0