Pipe clamps of REHAU RAUPIANO PLUS sound-absorbing system

Rehau RAUPIANO PLUS sound-dampening support bracket consists of two parts - fastening clamp and supporting clamp.

For mounting fastening clamp is fit around the pipe and closed. After that, the supporting clamp is mounted on masonry.

The sound-dampening support bracket is equipped with special inserts which reduce sound propagation.

It is made of galvanized steel.

Supporting clamp is used for mounting RAUPIANO PLUS drainage system. It is equipped with rubber insert which is made of galvanized strip steel. Also it has a special spacer according to DIN 4109 - it is located in the lock of the supporting clamp and prevents tight adjunction of the mounting element to the pipe, so acoustic coupling reduces.

The supporting clamp is used for fixation the pipe with diameter of 160 mm to the wall.

Connecting thread is М 10.

Attention! After the stock is sold, the article will be replaced by: 11200571002.

Supporting clamp is used for mounting RAUPIANO PLUS drainage system. It is equipped with rubber insert which is made of galvanized strip steel. Also it has a special spacer according to DIN 4109 - it is located in the lock of the supporting clamp and prevents tight adjunction of the mounting element to the pipe, so acoustic coupling reduces.

The supporting clamp is used for fixation the pipe with diameter of 75 mm to the wall.

Comes with anchoring pin М 10 mm and a wall plate.

Supporting clamp is used for mounting RAUPIANO PLUS drainage system. It is equipped with rubber insert which is made of galvanized strip steel. Also it has a special spacer according to DIN 4109 - it is located in the lock of the supporting clamp and prevents tight adjunction of the mounting element to the pipe, so acoustic coupling reduces.

The supporting clamp is used for fixation the pipe with diameter of 110 mm to the wall.

Connecting thread is М 8/10.

Attention! After the stock is sold, the article will be replaced by: 11200271002.

Supporting clamp is used for mounting RAUPIANO PLUS drainage system. It is equipped with rubber insert which is made of galvanized strip steel. Also it has a special spacer according to DIN 4109 - it is located in the lock of the supporting clamp and prevents tight adjunction of the mounting element to the pipe, so acoustic coupling reduces.

The supporting clamp is used for fixation the pipe with diameter of 160 mm to the wall.

Connecting thread is М 10.

Supporting clamp is used for mounting RAUPIANO PLUS drainage system. It is equipped with rubber insert which is made of galvanized strip steel. Also it has a special spacer according to DIN 4109 - it is located in the lock of the supporting clamp and prevents tight adjunction of the mounting element to the pipe, so acoustic coupling reduces.

The supporting clamp is used for fixation the pipe with diameter of 125 mm to the wall.

Connecting thread is М 10.

Supporting clamp is used for mounting RAUPIANO PLUS drainage system. It is equipped with rubber insert which is made of galvanized strip steel. Also it has a special spacer according to DIN 4109 - it is located in the lock of the supporting clamp and prevents tight adjunction of the mounting element to the pipe, so acoustic coupling reduces.

The supporting clamp is used for fixation the pipe with diameter of 110 mm to the wall.

Connecting thread is М 8/10.

Supporting clamp is used for mounting RAUPIANO PLUS drainage system. It is equipped with rubber insert which is made of galvanized strip steel. Also it has a special spacer according to DIN 4109 - it is located in the lock of the supporting clamp and prevents tight adjunction of the mounting element to the pipe, so acoustic coupling reduces.

The supporting clamp is used for fixation the pipe with diameter of 90 mm to the wall.

Connecting thread is М 8/10.

Supporting clamp is used for mounting RAUPIANO PLUS drainage system. It is equipped with rubber insert which is made of galvanized strip steel. Also it has a special spacer according to DIN 4109 - it is located in the lock of the supporting clamp and prevents tight adjunction of the mounting element to the pipe, so acoustic coupling reduces.

The supporting clamp is used for fixation the pipe with diameter of 50 mm to the wall.

Connecting thread is М 8.

Supporting clamp is used for mounting RAUPIANO PLUS drainage system. It is equipped with rubber insert which is made of galvanized strip steel. Also it has a special spacer according to DIN 4109 - it is located in the lock of the supporting clamp and prevents tight adjunction of the mounting element to the pipe, so acoustic coupling reduces.

The supporting clamp is used for fixation the pipe with diameter of 40 mm to the wall.

Connecting thread is М 8.

Rehau RAUPIANO PLUS fastening clamp with locking is destined for socket connections and it prevents damage of the pipe at higher loads..

The fastening clamp is mounted easily, also it is easy to dismantle. If you install the clamp properly, thermal elongation of the pipeline must not exert any influence on the domestic drainage system.

Application purposes:

• Domestic drainage systems in buildings up to 20 m;
• Risers which are installed without branches through several floors;
• Locations of the pipeline where backflow is formed;
• On the socket connections at higher loads.

Comes with fastener. For pipes DN50.

Material: PA 66 GF 60.

Colour: black.

Supporting clamp is used for mounting RAUPIANO PLUS drainage system. It is equipped with rubber insert which is made of galvanized strip steel. Also it has a special spacer according to DIN 4109 - it is located in the lock of the supporting clamp and prevents tight adjunction of the mounting element to the pipe, so acoustic coupling reduces.

The supporting clamp is used for fixation the pipe with diameter of 75 mm to the wall.

Connecting thread is М 8/10.

CRehau RAUPIANO PLUS fastening clamp is easily mounted on the pipe, also it is dismantled easy. Thermal expansion of the pipeline must not exert any influence on the drainage system if the fastening clamp was installed properly.

Fields of application:

• Domestic sewage systems in buildings up to 20 m;
• Risers which are mounted through several floors without branches;
• Pipeline locations where the backflow is formed;
• Socketed connection with the long-term stresses.

For pipes with diameter of 110 mm. It is made of galvanized steel.

Attention! After the stock is sold, the article will be replaced by: 11200291002.

Rehau RAUPIANO PLUS fastening clamp with locking is destined for socket connections and it prevents damage of the pipe at higher loads..

The fastening clamp is mounted easily, also it is easy to dismantle. If you install the clamp properly, thermal elongation of the pipeline must not exert any influence on the domestic drainage system.

Application purposes:

• Domestic drainage systems in buildings up to 20 m;
• Risers which are installed without branches through several floors;
• Locations of the pipeline where backflow is formed;
• On the socket connections at higher loads.

For pipes DN125. It is made of galvanized strip steel.

Connecting thread is M 10.

Rehau RAUPIANO PLUS fastening clamp is mounted easily, also it is easy to dismantle it. If you install it properly, thermal expansion of the pipeline must not exert any influence on the domestic sewerage system.

Application purposes:

• Domestic drainage systems in buildings up to 20 m;
• Risers which are installed without branches through several floors;
• Locations of the pipeline where backflow is formed;
• On the socket connections at higher loads.

For pipes DN125. It is made of galvanized strip steel.

Connecting thread is M 10.

Rehau RAUPIANO PLUS fastening clamp is mounted easily, also it is easy to dismantle it. If you install it properly, thermal expansion of the pipeline must not exert any influence on the domestic sewerage system.

Application purposes:

• Domestic drainage systems in buildings up to 20 m;
• Risers which are installed without branches through several floors;
• Locations of the pipeline where backflow is formed;
• On the socket connections at higher loads.

For pipes DN90. It is made of galvanized strip steel.

Connecting thread is М 8/10.

Rehau RAUPIANO PLUS fastening clamp is mounted easily, also it is easy to dismantle it. If you install it properly, thermal expansion of the pipeline must not exert any influence on the domestic sewerage system.

Application purposes:

• Domestic drainage systems in buildings up to 20 m;
• Risers which are installed without branches through several floors;
• Locations of the pipeline where backflow is formed;
• On the socket connections at higher loads.

For pipes DN75. It is made of galvanized strip steel.

Connecting thread is М 8/10.

CRehau RAUPIANO PLUS fastening clamp is easily mounted on the pipe, also it is dismantled easy. Thermal expansion of the pipeline must not exert any influence on the drainage system if the fastening clamp was installed properly.

Fields of application:

• Domestic sewage systems in buildings up to 20 m;
• Risers which are mounted through several floors without branches;
• Pipeline locations where the backflow is formed;
• Socketed connection with the long-term stresses.

For pipes with diameter of 50 mm. It is made of galvanized steel.

CRehau RAUPIANO PLUS fastening clamp is easily mounted on the pipe, also it is dismantled easy. Thermal expansion of the pipeline must not exert any influence on the drainage system if the fastening clamp was installed properly.

Fields of application:

• Domestic sewage systems in buildings up to 20 m;
• Risers which are mounted through several floors without branches;
• Pipeline locations where the backflow is formed;
• Socketed connection with the long-term stresses.

For pipes with diameter of 40 mm. It is made of galvanized steel.

Rehau RAUPIANO PLUS fastening clamp is mounted easily, also it is easy to dismantle it. If you install it properly, thermal expansion of the pipeline must not exert any influence on the domestic sewerage system.

Application purposes:

• Domestic drainage systems in buildings up to 20 m;
• Risers which are installed without branches through several floors;
• Locations of the pipeline where backflow is formed;
• On the socket connections at higher loads.

For pipes DN110. It is made of galvanized strip steel.

Connecting thread is M8/10.