HL floor drains for indoor use

Floor drain HL 72.1H has horizontal outlet DN75/110. The floor drain is equipped with bitumen membrane d 500 mm, cut-to-size grate frame plastic 20 - 70 mm, grate 147*147 mm, strainer for catching debris, cleaning eye and trap seal. Depth of trap seal is 60 mm. Capacity is 1.5 l/s. Load class is K - 300 kg.

Download data sheet: Floor drain HL 72.1H

Floor drain HL 72.1HN has horizontal outlet DN75/110. The floor drain is equipped with cut-to-size grate frame plastic 20 - 70 mm, grate 147х147 mm, bitumen membrane d 500 mm, strainer for catching debris, cleaning eye and trap seal. Depth of trap seal is 60 mm. Capacity is 1.5 l/s. Load class is K - 300 kg.

Download data sheet: Floor drain HL 72.1HN

Floor drain HL 72.1N has horizontal outlet DN75/110. The floor drain is equipped with cut-to-size grate frame plastic 20 - 70 mm, grate 147х147 mm, strainer for catching debris, flange, cleaning eye and trap seal. Depth of trap seal is 60 mm. Capacity is 1.5 l/s. Load class is K - 300 kg.

Download data sheet: Floor drain HL 72.1N

Plug-in drain Primus HL 73Pr is designed for installation indoors without waterproofing. Service life of the drain is not less than 50 years. Temperature of waste water should not exceed  +85 °C and for a short period of time it can rise up to 100 °C. The drain is equipped with "Primus" trap, stainless steel frame 121 x 121 mm, system "Klick-Klack" and grate 115 x 115 mm. Capacity is 0,46 l/s. The drain can endure load up to 300 kg.

Documentation

Download example of product installation:  Floor drain HL 73Pr

Floor drain HL 80.1 has ball-joint outlet (for horizontal and vertical use). Diameter of the drain is 50/75 mm, its weight is 625 grams.Capacity is 0.5 l/s, device can endure load up to 300 kg. The floor drain have a grate 115*115 mm and plastic grate frame 123*123 mm. Depth of trap seal is 50 mm. The floor drain disposes effluents from the floor level and waterproofing, and temperature of effluents should be below 85 °C. Height of the grate frame can be adjusted from the smallest to largest.

Documentation

Download data sheet:  Floor drain HL 80.1

Download example of product installation:  Floor drain HL 80.1

Floor drain HL 80.1-3000 is designed for installation inside buildings. It has ball-joint outlet DN50/75. The drain has grate 115*115 mm - it is made of stainless steel. Size of grate frame is 123*123 mm. Capacity is 0,5 l/s. The drain can endure load up to 300 kg. Also the drain is equipped with bitumen membrane trap seal. Operating temperature is +85°С, and it can increase up to.+100°С for short time period.

Documentation

Download data sheet: Floor drain HL 80.1-3000

Application area:

• For indoor use

Characteristics:

• Material: PP
• Dimension: DN50/75
• capacity: 0,5 l/sec
• visual parts: brass
• load class: 300 kg

Weight: 0,625 kg

Floor drain HL 80.1C has ball-joint outlet (for horizontal and vertical use). Diameter of the drain is 50/75 mm, its weight is 6100 grams.Capacity is 0.5 l/s, device can endure load up to 300 kg. The floor drain is equipped with a grate 115*115 mm and plastic grate frame 123*123 mm, steel mesh and CeraDrain collar with polymer concrete collar. Depth of trap seal is 50 mm.

Documentation

Download example of product installation:  Floor drain HL 80.1C

Floor drain HL 80.1H has ball-joint outlet (for horizontal and vertical use) and bitumen membrane d 420 mm. Diameter of the drain is 50/75 mm, its weight is 1195 grams.Capacity is 0.5 l/s, device can endure load up to 300 kg. The floor drain is equipped with a grate 115*115 mm, grate frame 123*123 mm and trap seal.

Documentation

Download example of product installation:  Floor drain HL 80.1H

Floor drain HL 80.1H-3000 is designed for installation inside buildings. It has ball-joint outlet DN50/75. The drain has grate 115*115 mm - it is made of stainless steel. Size of grate frame is 123*123 mm. Capacity is 0,5 l/s. The drain can endure load up to 300 kg. Also the drain is equipped with extension KLICK-KLACK. Height of trap seal is 50 mm.

Floor drain HL 80.1HR has ball-joint outlet (for horizontal and vertical use) and bitumen membrane d 420 mm. Diameter of the drain is 50/75 mm, its weight is 1220 grams.Capacity is 0.5 l/s, device can endure load up to 300 kg. The floor drain is equipped with a plate d 112 mm, cut-to-size plastic extension 20 - 73 mm with frame round d 131 mm and trap seal.

Documentation

Download example of product installation:  Floor drain HL 80.1HR

Floor drain HL 80.1R has ball-joint outlet (for horizontal and vertical use) and flange. Diameter of the drain is 50/75 mm, its weight is 650 grams.Capacity is 0.5 l/s, device can endure load up to 300 kg. The floor drain is equipped with a plate d 112 mm, cut-to-size extension 20 - 73 mm with frame round d 133 mm and trap seal.

Documentation

Download example of product installation:  Floor drain HL 80.1R

Floor drain HL 80.2 has ball-joint outlet (for horizontal and vertical use) and flange. Diameter of the drain is 50/75 mm, its weight is 535 grams.Capacity is 0.5 l/s. The floor drain is equipped with a grate frame 12 - 73 mm / 100 x 100 mm, coverplate 94 x 94 mm and stand pipe 100 mm.

Documentation

Download example of product installation:  Floor drain HL 80.2

Floor drain HL 80.2H has ball-joint outlet (for horizontal and vertical use) and bitumen membrane d 420 mm. Diameter of the drain is 50/75 mm, its weight is 1250 grams.Capacity is 0.5 l/s. The floor drain is equipped with a cut-to-size grate frame 12 - 73 mm / 100 x 100 mm, coverplate 94 x 94 mm and stand pipe 100 mm.

Documentation

Download example of product installation:  Floor drain HL 80.2H

Floor drain HL 81.1G has ball-joint outlet (for horizontal and vertical use) and flange. Diameter of the drain is 50/75 mm, its weight is 2400 grams.Capacity is 0.5 l/s, device can endure load up to 1500 kg. The floor drain is equipped with a cast iron grate 137 x 137 mm, cast iron grate frame 150 x 150 mm, cut-to-size extension 34 - 73 mm and trap seal.

Documentation

Download example of product installation:  Floor drain HL 81.1G

Floor drain HL 81.1GH has ball-joint outlet (for horizontal and vertical use) and bitumen membrane d 420 mm. Diameter of the drain is 50/75 mm, its weight is 2620 grams.Capacity is 0.5 l/s, device can endure load up to 1500 kg. The floor drain is equipped with a cast iron grate 137 x 137 mm, cast iron grate frame 150 x 150 mm, cut-to-size plastic extension 34 - 73 mm and trap seal.

Documentation

Download example of product installation:  Floor drain HL 81.1GH

Floor drain HL 90HPr is designed for installation inside buildings. It has horizontal outlet DN40/50. The drain has grate 115*115 mm - it is made of stainless steel. Size of grate frame is 123*123 mm. Capacity is 0,43 l/s. The drain can endure load up to 300 kg. Also the drain is equipped with bitumen membrane d 420 mm and trap seal PRIMUS.

Download data sheet: Floor drain 90HPr

Floor drain HL 90HPr-3000 is designed for installation inside buildings. It has horizontal outlet DN40/50. The drain has grate 115*115 mm - it is made of stainless steel. Size of grate frame is 121*121 mm. Capacity is 0,43 l/s. The drain can endure load up to 300 kg. Also the drain is equipped with a siphon PRIMUS and bitumen membrane d 420 mm.