Logo
Ru| En
Loading

Hauraton Drainage solution for civil engineering

The construction of roads and industrial facilities is needed the providing drainage, and the drainage system must possess special characteristics. Hauraton drainage systems meet highest requirements - the channels are certified to DIN EN 1433 and GOST - R.

The channels, manufactured by the Hauraton company, are equipped with gratings with boltless locking system SIDE-LOCK. This method of fastening reduces time the fixing of grating - duration of the process with SIDE-LOCK is just 30 seconds. Besides the channels with a 8-fold bolt fixing grating are exposed to corrosive processes in the bolted connection.

Concrete channels are reinforced with fiber and are intended for the use in industrial facilities. The drainage channels for civil engineering comply with the highest European standards of quality,...
Hauraton combined channels for civil engineering are made of PP and are resistant to corrosion, frost and de-icing salt, which strews the streets during frost. This makes the combined channels is i...
Hauraton point drainage for civil engineering can be installed in public and commercial areas. The body of intersection units are made of fibre-reinforced concrete, gratings are made of cast iron. ...
Hauraton gratings are used with drainage systems, and they remove water from the surface of the airport, squares and other places with extreme loads. The gratings can have KTL-coating, there are...
Trash boxes are used with Hauraton drainage channels and are designed for the catch of various garbage. The trash boxes can have stainless steel angle housing. Also the trash boxes can have cast...
Foul air traps of Hauraton channels for civil engineering are made of high quality material, and they vary in diameter - the diameter of the foul air traps can be range from 100 to 150 mm. The foul...
End caps are used in drainage channels, and they are made of galvanized or stainless steel. The end caps are characterized by high quality, durability and resistant to corrosion. The end caps ar...
Fixing elements are used for installation of drainage channels. They can be divided into several types: Hexagonal bolts; Locking handles; Connection plates with screw set etc.
Sealing is necessary for the proper functioning of the drainage channel which is installed in an area with high load, for example, at the airport. The Hauraton company produces special products ...
Accessories of Hauraton channels for civil engineering can be divided into several types: Connections with diameter 100-200 mm; Mud buckets for trash boxes; Step Fall Adapters for step sl...

The Hauraton company has developed several drainage systems which are suitable for industrial sites:

  • FASERFIX SUPER - drainage system are designed for extreme loads and high dynamic forces. The FASERFIX SUPER channels are made of fibre-reinforced concrete. The angle housing of the channel is made of galvanized steel, and it is highly resistant to corrosion. The gratings up to Class F900 are certified to DIN EN 1433. All channels are equipped with boltless locking system SIDE-LOCK, and you can fix the grating with 8 bolts per meter if necessary. There is safety joint for easy sealing.
  • FASERFIX SUPER KS - drainage system for commercial and public areas. The channels are made of fibre-reinforced concrete that makes them as durable. Channels weight is reduced in comparison with other systems which are used in commercial and public areas. The gratings are fastened to the channels with boltless locking system SIDE-LOCK. The channel can be equipped with galvanized or stainless steel angle housing - it increases resistance to corrosion. Also the drainage system is characterized by flame retardant, resistance against frost, de-icing salt. The important advantage of the system is attractive appearance.
  • FASERFIX BIG - it is drainage channels with concrete runners for maximum stability under heavy loads. They have corrosion protected angle housings made of galvanized steel. Depth of galvanized angle housing is 40 mm. Gratings up to Class F900. The gratings are fastened with boltless locking system SIDE-LOCK, there is the possibility of an additional fixing with bolts (shall be used 8-fold bolts per meter). There is safety joint for easy sealing. Channels are characterized by flame retardant and resistant to all weather conditions. The channels length can reach to 4 m.
  • RECYFIX PLUS X - drainage system is designed for areas with higher traffic flows. The channels are made of PP, i.e. they are light but unbreakable. Gratings up to Class D400. The nominal widths of channels can be range from 100 mm to 300 mm. Also the channels have corrosion-resistant galvanized steel angle housings. The channels are distinguished by superior resistance against frost and de-icing salts.
  • RECYFIX NC - drainage channels are made of PP. The drainage system is designed for civil engineering, load capacity up to E600. The connection is performed with bolts. The channels are characterized by highest resistance to frost and de-icing salts, and they easy to install. The channels is light but unbreakable. Channels are easy to transport and store. The gratings are made of cast iron.
  • RECYFIX SUPER - drainage system are characterized by light and unbreakable, it is designed for installation in public areas and industrial zones. The channels are made of polyethylene, they are easy to use and install. Galvanized angle housings of channels increase their resistance to corrosion. Also the channels are resistant to frost and de-icing salts. Load capacity from C250 to F900.
  • RECYFIX HICAP F - system of drainage channels which has ultra-high capacity. The channels are characterized by lack separate gratings, ease of installation, high capacity. Installation of the drinage system does not require the additional installation of underground pipes. Channel body is made of high density polyethylene and top inlet is made of cast iron. Polyethylene, which is used for manufacturing of the channels, is by 29 times higher tensile strength and 9 times higher compressive strength as polymer concrete. The channel can be used not only for the drainage but also for the retention, i.e. it can be used as a sewer system. The use of the drainage system can reduce trash boxes and pipe connections required. Toy can connect pipes to the channels. Load capacity up to F900. Capacity is 4 l/s per meter.
  • RECYFIX HICAP G - drainage system is designed for the highest load category. The system has high capacity which is 4 l/s per linear meter, so that channel can removal of water from the surface even in very heavy rains. The system is fully consistent with the previous system RECYFIX HICAP F, but it can be installed in cobbled surfaces, tiles and asphalt.
  • FASERFIX POINT - durable point drainage is designed for commercial and public areas. The channel's body is made of fibre-reinforced concrete. The system is tested according to DIN EN 124. The point drainage is protected by a galvanised steel angle housing all round. The gratings are fastened with boltless locking system SIDE-LOCK. There is a special sludge trap for garbage collection which can be made of polyethylene or galvanized steel. The system includes special elements for changing the height of the storm-water inlets. The storm-water inlets can be used as a trash box and as a strainer - in that case, the outlet openings in the lower part will be closed off and an additional outlet opening inserted in the middle part of the upper part. Cells of the grating are narrow, so point drainage is completely safe for pedestrians and they retain the debris.
  • RECYFIX MONOTEC - drainage system is intended for heavily frequented traffic areas. The system has a minimum weight and high strength, also it is very quick to install and easy to transport. The channels are made of specially resistant modified polypropylene, and it is resistant to frost, UV rays and reagents. The channels are vandal-proof. Working surface is hydraulically optimized of FIBRETEC style. The grating has high capacity despite the narrow cells.