The scope of application of the Fachmann VC-PVC 100x100x650 attica drain is flat roofs with bitumen insulation. It is used in the construction of external drainage systems of buildings to drain drains through balconies / parapets on lowered sections of a flat roof. It is made of a polyvinyl chloride composition with strength, frost resistance, resistance to atmospheric factors, ultraviolet radiation, and high temperatures.
The attica drain consists of the following parts:
The Fachmann VC-PVC 100x100x650 attica drain has the following distinctive features:
The Fachmann attica drain is mounted on a section of the roof having drop of 20-30 mm, with size of at least 500x500 mm. A decrease is created by reducing the layer of backfill insulation or the thickness of thermal insulation. Installation must be carried out before installing a waterproof carpet.
Due to the high heat resistance of the polymer, deformation of the water intake bowl is eliminated during the welding of the EPDM or PVC membrane layer. A special hair dryer with a stable air flow temperature within 450 °C – 550 °C must be used for welding. Mounting of the flange to the base is usually carried out by 6 fasteners: 4 on a vertical, 2 on a horizontal surface.
Diameter | Outlet height | Capacity | Flange size | Raw materials of housing | Type of waterproofing |
---|---|---|---|---|---|
mm | mm | l/s | mm | ||
100 | 650 | 8 | 454x244 | frost-resistant PP | Bitumen-polymer |
Download: Passport 01.068