VALTEC press tool small-sized manual, with set of jaws, d - 16-20 [Code number: VTm.293.L.1620]

Application purpose:

• For manual pressing of fittings
• For metal-polymer and plastic pipes with diameters of 16 and 20 mm

Characteristics:

• Jaws profile is TN;
• Since there are no telescopic handles, large efforts are required for compression - approximately 150 N;
• The force for compression of the sleeve is 10.5 kN;
• Average resource: 5 thousand cycles;
• Mean time between failures - 2.5 thousand cycles;
• The handles are PVC coated;
• Due to the presence of axial eccentrics, if excessive play occurs, the tongs can be adjusted.

Weight (without attachments): 2.49 kg.

Constitution:

• 1. Handles;
• 2. PVC protective cover;
• 3. Rollers that protect the stops of the handles from crushing;
• 4. Axial eccentrics;
• 5. Half-shells to which the mounting force applied to the handles is transmitted;
• 6. Plank;
• 7. Button fasteners that fix the earbuds;
• 8. Press jaws.

Documentation

Download data sheet: VALTEC press tool VTm.293.L.1620