Shower channels | Inrusstrade

Viega Advantix Vario shower channels meet all modern requirements for overflow fittings. So they are quickly mounted using a combined waterproofing.

Shower channels are characterized by easy maintenance and cleaning, high reliability and hygiene. They are made of environmentally friendly polypropylene and stainless steel.

They are tested according to DIN EN 1253.

Specifications:

Capasity from 0.4 l/s to max. 1.1 l/sec;
Nominal outlet DN 40/50;
Attractive design;
Glass grilles made of single-layer safety glass;
Sealing flange along the perimeter for fixing the combined waterproofing;
Self-cleaning drains.

Advantix Vario Shower channel base unit, L= 300-1200 mm [Code number: 686277]

Article: 686277

Characteristics:

continuously cut to length
for compound sealing (tiled shower) or sealing lane
high-quality plastic

Components:

adjusting feet set
closing caps
self-cleaning drain fitting
height-adjustable standing grate holders
height adjustment piece
sealing flange
sealing accessories
saw guide

Technical data:

water seal height 50 mm
drainage capacity accumulation height 10 mm (in accordance with EN 1253) 0.4 l/s
drainage capacity accumulation height 20 mm (in accordance with EN 1253) 0,8 l/s
quality controlled in accordance with DIN EN 1253

Note:

This drain model in its lowest installation variant does not allow for adequate screed covering in the area of the connection pipe. This has to be taken into account by the planning specialist in good time. A possible solution for constructional purposes with regard to the tile size and/or possible casting with epoxy resin must be considered in planning!

L	МВ	DN
mm	mm	mm
300–1200	95–150	40/50

МВ - mounting height

Details

Advantix Vario Shower channel base unit, matt, L= 300-1200 mm [Code number: 704353]

Article: 704353

Characteristics:

continuously cut to length
for compound sealing (tiled shower) or sealing lane
high-quality plastic
includes Advantix Vario Shower channel standing grate, matt

Components:

adjusting feet set
closing caps
self-cleaning drain fitting
height-adjustable standing grate holders
height adjustment piece
sealing flange
sealing accessories
saw guide

Technical data:

water seal height 50 mm
drainage capacity accumulation height 10 mm (in accordance with EN 1253) 0.4 l/s
drainage capacity accumulation height 20 mm (in accordance with EN 1253) 0,8 l/s
quality controlled in accordance with DIN EN 1253

Note:

This drain model in its lowest installation variant does not allow for adequate screed covering in the area of the connection pipe. This has to be taken into account by the planning specialist in good time. A possible solution for constructional purposes with regard to the tile size and/or possible casting with epoxy resin must be considered in planning!

L	МВ	DN
mm	mm	mm
300–1200	95–150	40/50

МВ - mounting height

Details

Advantix Vario Shower channel base unit, shiny, L= 300-1200 mm [Code number: 704360]

Article: 704360

Characteristics:

continuously cut to length
for compound sealing (tiled shower) or sealing lane
high-quality plastic
includes Advantix Vario Shower channel standing grate, polished

Components:

adjusting feet set
closing caps
self-cleaning drain fitting
height-adjustable standing grate holders
height adjustment piece
sealing flange
sealing accessories
saw guide

Technical data:

water seal height 50 mm
drainage capacity accumulation height 10 mm (in accordance with EN 1253) 0.4 l/s
drainage capacity accumulation height 20 mm (in accordance with EN 1253) 0,8 l/s
quality controlled in accordance with DIN EN 1253

Note:

This drain model in its lowest installation variant does not allow for adequate screed covering in the area of the connection pipe. This has to be taken into account by the planning specialist in good time. A possible solution for constructional purposes with regard to the tile size and/or possible casting with epoxy resin must be considered in planning!

L	МВ	DN
mm	mm	mm
300–1200	95–150	40/50

МВ - mounting height

Details

Advantix Vario Shower channel base unit, L= 300-1200 mm, H=70mm [Code number: 721671]

Article: 721671

Characteristics:

continuously cut to length, 70 mm, (reconstruction model)
for compound sealing (tiled shower) or sealing lane
high-quality plastic

Components:

adjusting feet set
closing caps
self-cleaning drain fitting
height-adjustable standing grate holders
sealing flange
sealing accessories
saw guide

Technical data:

water seal height 25 mm
drainage capacity accumulation height 10 mm (in accordance with EN 1253) 0.55 l/s
drainage capacity accumulation height 20 mm (in accordance with EN 1253) 0.6 l/s
quality controlled in accordance with DIN EN 1253

Note:

This drain model does not allow for adequate screed covering due to the high position of the connection pipe. This has to be taken into account by the planning specialist in good time. A possible solution for constructional purposes with regard to the tile size and/or possible casting with epoxy resin must be considered in planning!