Logo
Ru| En
Loading

VALTEC tools and accessories for them

This group of products includes tools and accessories for them which are necessary for the installation of VALTEC polypropylene systems:

  • welding kit «Mini» which is designed for the installation of polypropylene pipes with diameters from 20 to 32 mm by manual polyfusion welding;
  • face smoothing tools for preparing polypropylene pipes reinforced with an aluminum layer for socket welding;
  • welding repair kit for brewing holes accidentally made during installation.
Photo Name Article Price
VALTEC Cordless tool set, for mounting axial fittings, d - 16-32 [Code number: VT.1240PZ.E.1632]
Details
VT.1240PZ.E.1632 148 649 rub

Application purpose:

  • For installation of pipelines using axial (sliding) fittings VT.400.BG
  • For PE-X pipes
  • For pipes of typical size series S3.2 (SDR 7.4) in accordance with GOST 32415-2013
  • For diameters 16(2.2), 20(2.8), 25(3.5), 32(4.4) mm

Characteristics:

  • The functions of pressing and expansion are combined;
  • Compactness;
  • Ergonomics;
  • Optimized center of gravity;
  • The handle is non-slip;
  • Can be operated with one hand;
  • The tool can be rotated 360°;
  • There is an OLED display, self-diagnosis and protection functions during operation;
  • Crimping time - 4 sec., expansion cycle time - 3 sec.;
  • Service life: 30 years;
  • Charging time: 30 minutes.

Equipment:

  • 1. Power block, 1 pc;
  • 2. Press jaws, 2 pcs (16/20 mm and 25/32 mm);
  • 3. Expansion nozzles, 4 pcs (DN 16, 20, 25, 32);
  • 4. Accumulator battery, 2 pcs;
  • 5. Cutter, 1 piece;
  • 6. Battery charger, 1 pc;
  • 7. Suitcase, 1 piece;
  • 8. Cord from the charger, 1 pc.

Documentation

Download data sheet: VT.1240PZ.E.1632 VALTEC Cordless tool set VT.1240PZ.E.1632

VALTEC Face smoothing tool for reinforced pipe, d - 75 [Code number: VTp.795.0.0075]
Details
VTp.795.0.0075 3 919 rub

Application purpose:

  • For preparing PP-ALUX pipes for polyfusion socket welding

Characteristics:

  • The trimmer is used to remove the aluminum layer from the cut of the reinforced pipe. Facing is carried out to a depth of 1-2 mm. Facing is done so that aluminum at the welded joint does not come into contact with water;
  • Facing is fast and reliable;
  • Facers for pipes of two diameters are combined in one body.

Important! All installation work must be carried out at a temperature not lower than +5°C.

Size: 75 mm.

The main advantages of the PP system:

  • Long service life - not less than 50 years;
  • Resistance to corrosion and chemical environments;
  • Low probability of silting;
  • Low weight pipes and fittings;
  • Environmental Safety;
  • Possibility of use at installation of systems of different function.

Documentation

Download installation manual: VTp.795.0.0075 VALTEC polypropylene pipes

VALTEC Face smoothing tool for reinforced pipe, d - 90 [Code number: VTp.795.0.0090]
Details
VTp.795.0.0090 4 137 rub

Application purpose:

  • For preparing PP-ALUX pipes for polyfusion socket welding

Characteristics:

  • The trimmer is used to remove the aluminum layer from the cut of the reinforced pipe. Facing is carried out to a depth of 1-2 mm. Facing is done so that aluminum at the welded joint does not come into contact with water;
  • Facing is fast and reliable;
  • Facers for pipes of two diameters are combined in one body.

Important! All installation work must be carried out at a temperature not lower than +5°C.

Size: 90 mm.

The main advantages of the PP system:

  • Long service life - not less than 50 years;
  • Resistance to corrosion and chemical environments;
  • Low probability of silting;
  • Low weight pipes and fittings;
  • Environmental Safety;
  • Possibility of use at installation of systems of different function.

Documentation

Download installation manual: VTp.795.0.0090 VALTEC polypropylene pipes

VALTEC Face smoothing tool for reinforced pipe, d - 20+25 [Code number: VTp.795.0.2025]
Details
VTp.795.0.2025 864 rub

Application purpose:

  • For preparing PP-ALUX pipes for polyfusion socket welding

Characteristics:

  • The trimmer is used to remove the aluminum layer from the cut of the reinforced pipe. Facing is carried out to a depth of 1-2 mm. Facing is done so that aluminum at the welded joint does not come into contact with water;
  • Facing is fast and reliable;
  • Facers for pipes of two diameters are combined in one body.

Important! All installation work must be carried out at a temperature not lower than +5°C.

Size: 20+25 mm.

The main advantages of the PP system:

  • Long service life - not less than 50 years;
  • Resistance to corrosion and chemical environments;
  • Low probability of silting;
  • Low weight pipes and fittings;
  • Environmental Safety;
  • Possibility of use at installation of systems of different function.

Documentation

Download installation manual: VTp.795.0.2025 VALTEC polypropylene pipes

VALTEC Face smoothing tool for reinforced pipe, d - 50-63 [Code number: VTp.795.0.5063]
Details
VTp.795.0.5063 3 028 rub

Application purpose:

  • For preparing PP-ALUX pipes for polyfusion socket welding

Characteristics:

  • The trimmer is used to remove the aluminum layer from the cut of the reinforced pipe. Facing is carried out to a depth of 1-2 mm. Facing is done so that aluminum at the welded joint does not come into contact with water;
  • Facing is fast and reliable;
  • Facers for pipes of two diameters are combined in one body.

Important! All installation work must be carried out at a temperature not lower than +5°C.

Size: 50-63 mm.

The main advantages of the PP system:

  • Long service life - not less than 50 years;
  • Resistance to corrosion and chemical environments;
  • Low probability of silting;
  • Low weight pipes and fittings;
  • Environmental Safety;
  • Possibility of use at installation of systems of different function.

Documentation

Download installation manual: VTp.795.0.5063 VALTEC polypropylene pipes

VALTEC Face smoothing tool for reinforced pipes for use with power tool, d - 20 [Code number: VTp.795.E.020]
Details
VTp.795.E.020 827 rub
VALTEC Face smoothing tool for reinforced pipes for use with power tool, d - 25 [Code number: VTp.795.E.025]
Details
VTp.795.E.025 919 rub
VALTEC Face smoothing tool for reinforced pipes for use with power tool, d - 32 [Code number: VTp.795.E.032]
Details
VTp.795.E.032 1 140 rub
VALTEC Face smoothing tool for reinforced pipes for use with power tool, d - 40 [Code number: VTp.795.E.040]
Details
VTp.795.E.040 1 383 rub
VALTEC Face smoothing tool for reinforced pipes for use with power tool, d - 50 [Code number: VTp.795.E.050]
Details
VTp.795.E.050 1 770 rub
VALTEC Welding repair kit for polypropylene pipes, 9х4,5 mm [Code number: VTp.797.R.000020]
Details
VTp.797.R.000020 1 881 rub
VALTEC Set of welding nozzles for PPR, d - 110mm [Code number: VTp.797.W.000110]
Details
VTp.797.W.000110 3 729 rub

Purpose of application:

  • For welding PP pipes
  • For manual polyfusion welding machines

Characteristics:

  • the kit includes a nozzle for a pipe, a nozzle for a fitting, as well as a connecting screw;
  • coated with teflon paint;
  • resistant to mechanical stress;
  • nozzles are made of aluminum alloy.

Average full resource: 1500 connections made.

Heating temperature: +260 °С.

Size: 110 mm.

Documentation

Download product data sheet: VTp.797.W.000110 VALTEC Set of welding nozzles VTp.797.W.000110

(DISCONTINUED) - VALTEC Welding kit «Mini», d - 20-32 (750 W) [Code number: VTp.799.L.020032]
Details
VTp.799.L.020032

Purpose of application:

  • For installation of polypropylene pipes by manual polyfusion welding
  • For pipelines with diameters from 20 to 32 mm

Characteristics:

  • Metal case, dimensions 400x130x90 mm;
  • Welding machine;
  • Allen key SW5;
  • Set of nozzles for DN20 (coupling + socket);
  • Set of nozzles for DN25 (coupling + socket);
  • Set of nozzles for DN32 (coupling + socket);
  • Set of nozzles for DN40 (coupling + socket);
  • The passport.

Voltage: 220 V.

Power: 750W.

The current frequency is 50 Hertz.

Temperature is regulated in the range from +50 to +300 ºС.

Working temperature: +260 ºС.

The heating time to operating temperature is no more than 10 minutes.

Weight of the welding machine: 0.62 kg.

Kit weight: 2.09 kg.

Average full resource: 5000 hours.

Documentation

Download product data sheet: VTp.799.L.020032 VALTEC Welding kit «Mini»

VALTEC Pipe unwinder (for coiled pipes) [Code number: VT.RT.02.0]
Details
VT.RT.02.0 10 297 rub
[NO LONGER PRODUCED] - VALTEC Special stripping for reinforced pipe, d - 32+40 [Code number: VTp.795.0.3240]
Details
VTp.795.0.3240 1 868 rub

Application purpose:

  • For preparing PP-ALUX pipes for polyfusion socket welding

Characteristics:

  • The trimmer is used to remove the aluminum layer from the cut of the reinforced pipe. Facing is carried out to a depth of 1-2 mm. Facing is done so that aluminum at the welded joint does not come into contact with water;
  • Facing is fast and reliable;
  • Facers for pipes of two diameters are combined in one body.

Important! All installation work must be carried out at a temperature not lower than +5°C.

Size: 32+40 mm.

The main advantages of the PP system:

  • Long service life - not less than 50 years;
  • Resistance to corrosion and chemical environments;
  • Low probability of silting;
  • Low weight pipes and fittings;
  • Environmental Safety;
  • Possibility of use at installation of systems of different function.

Documentation

Download installation manual: VTp.795.0.3240 VALTEC polypropylene pipes

See also