Logo
Ru| En
Loading

Termoclip Anchors

Anchors are used for reliable connection of supporting elements with the base material. The base material can be concrete, natural stone. It is mounted in a pre-drilled and cleaned hole of the appropriate diameter and depth.

The group of products also includes high-strength facade anchors (wall dowels) for attaching brackets of curtain wall systems and other structures to the supporting base.

Photo Наименование Article Цена
Anchor MTA, M10 x 100 [Code number: 00428301]
Details
00428301 140 rub

Application purpose:

  • For reliable connection of support elements with the base material

Characteristics:

  • Base material: Concrete (B20-B60), natural stone
  • Easy installation
  • For static and quasi-static loads
  • High bearing capacity
  • Anchor material: cold rolled steel, zinc coating ≥5 μm
  • Clip material: cold rolled steel, zinc coating ≥40 μm
  • Nut material: zinc coated steel ≥5 μm (DIN 934)
  • Washer material: zinc coated steel ≥5 μm (DIN 125, DIN 9021)
Diameter of the hole Depth of anchor installation Max. thickness of the material to be fixed Tightening torque
mm mm mm N*m
10 66 10 35

Download passport of product: Termoclip Anchor MTA Termoclip Anchor MTA

Anchor MTP-G, M12 x 130 [Code number: 00427401]
Details
00427401 434 rub

Application purpose:

  • For reliable connection of support elements with the base material

Characteristics:

  • Base material: Concrete (B20-B60), compressed and stretched concrete zones, natural stone
  • Easy installation
  • Application in compressed and stretched concrete areas
  • For static and dynamic loads
  • Use in dry and wet aggressive environments
  • High bearing capacity
  • Fire resistant compound (R30-R120)
  • Earthquake Resistance (C1, C2)
  • Anchor material: carbon steel with thermal diffusion coating ≥40 μm
  • Clip material: A4 stainless steel
  • Nut material: Thermally Diffusion Coated Steel ≥40 μm (DIN 934)
  • Washer material: steel with thermal diffusion coating ≥40 μm (DIN 125, DIN 9021)
Diameter of the hole Depth of anchor installation Max. thickness of the material to be fixed Tightening torque
mm mm mm N*m
12 80 34 60

Download passport of product: Termoclip Anchor MTP-G Termoclip Anchor MTP-G

Anchor MTP-G, М 10 х 90 [Code number: 00427301]
Details
00427301 240 rub

Application purpose:

  • For reliable connection of support elements with the base material

Characteristics:

  • Base material: Concrete (B20-B60), compressed and stretched concrete zones, natural stone
  • Easy installation
  • Application in compressed and stretched concrete areas
  • For static and dynamic loads
  • Use in dry and wet aggressive environments
  • High bearing capacity
  • Fire resistant compound (R30-R120)
  • Earthquake Resistance (C1, C2)
  • Anchor material: carbon steel with thermal diffusion coating ≥40 μm
  • Clip material: A4 stainless steel
  • Nut material: Thermally Diffusion Coated Steel ≥40 μm (DIN 934)
  • Washer material: steel with thermal diffusion coating ≥40 μm (DIN 125, DIN 9021)
Diameter of the hole Depth of anchor installation Max. thickness of the material to be fixed Tightening torque
mm mm mm N*m
10 68 10 40

Download passport of product: Termoclip Anchor MTP-G Termoclip Anchor MTP-G

Anchor HENO, M10 x 40 [Code number: 00429301]
Details
00429301 48 rub

Application purpose:

  • For reliable connection of support elements with the base material

Characteristics:

  • Base material: Concrete (B20-B60), compressed and stretched concrete zones
  • Easy installation
  • For static and quasi-static loads
  • High bearing capacity
  • Fire resistant compound
  • Anchor rod material: carbon steel, zinc coating ≥5 μm
Diameter of the hole Depth of anchor installation Installation tool Tightening torque
mm mm   N*m
12 40 EXHB М10 17

Download passport of product: Termoclip Anchor HENO Termoclip Anchor HENO

Anchor HENO, M8 x 30 [Code number: 00429201]
Details
00429201 27 rub

Application purpose:

  • For reliable connection of support elements with the base material

Characteristics:

  • Base material: Concrete (B20-B60), compressed and stretched concrete zones
  • Easy installation
  • For static and quasi-static loads
  • High bearing capacity
  • Fire resistant compound
  • Anchor rod material: carbon steel, zinc coating ≥5 μm
Diameter of the hole Depth of anchor installation Installation tool Tightening torque
mm mm   N*m
10 30 EXHB М8 11

Download passport of product: Termoclip Anchor HENO Termoclip Anchor HENO

Dowel V2, hole diameter 10 mm, length 60 mm, GEO [Code number: 00423001]
Details
00423001 35 rub

Application purpose:

  • For fastening the brackets of suspended facade systems with a ventilated gap and other building products to the supporting base

Characteristics:

  • Resistance to extreme temperatures
  • High impact strength and deformation resistance characteristics (not less than 65 MPa)
  • Resistant to dynamic loads
  • Not flammable and does not sustain combustion
  • Halogen-free material
  • Due to the special expansion zone, the force to break out the anchor from the bearing base reaches 24 kN
  • The dowel side prevents the appearance of a cold bridge and the occurrence of contact corrosion
  • Developed stops prevent the dowel from rolling in the hole at the time of installation
  • The presence of an impact stop prevents premature wedging of the dowel
  • Spacer Wall V2 Geo made of high strength alloy steel in accordance with ISO international standard
  • Corrosion resistance to medium aggressive environment for at least 50 years
  • Extra coating and optimized threaded zone provide low torsional resistance and high tightening torque
  • Versatility for all types of building materials
  • All mounts are pre-assembled
  • Anchor material: high-quality polyamide with high strength characteristics
  • Spacer wedge material: Carbon steel
Anchor length Diameter of the hole Min. anchoring depth Max thickness of attachment Min. hole depth
mm mm mm mm mm
60 10 50 10 80
Dowel V2, hole diameter 10 mm, length 80 mm [Code number: 00424001]
Details
00424001 35 rub

Application purpose:

  • For fastening the brackets of suspended facade systems with a ventilated gap and other building products to the supporting base

Characteristics:

  • Resistance to extreme temperatures
  • High impact strength and deformation resistance characteristics (not less than 65 MPa)
  • Resistant to dynamic loads
  • Not flammable and does not sustain combustion
  • Halogen-free material
  • The dowel side prevents the appearance of a cold bridge and the occurrence of contact corrosion
  • Developed stops prevent the dowel from rolling in the hole at the time of installation
  • The presence of an impact stop prevents premature wedging of the dowel
  • Corrosion resistance to medium aggressive environment for at least 50 years
  • Optimized threaded zone gives low torsional resistance and high tightening torque
  • Versatility for all types of building materials
  • All mounts are pre-assembled
  • Anchor material: high-quality polyamide with high strength characteristics
  • Spacer wedge material: Stainless steel
Anchor length Diameter of the hole
mm mm
80 10
Dowel V2Е, hole diameter 10 mm, length 80 mm [Code number: 00425001]
Details
00425001 90 rub

Application purpose:

  • For fastening the brackets of suspended facade systems with a ventilated gap and other building products to the supporting base

Characteristics:

  • Resistance to extreme temperatures
  • High impact strength and deformation resistance characteristics (not less than 65 MPa)
  • Resistant to dynamic loads
  • Not flammable and does not sustain combustion
  • Halogen-free material
  • Due to the special expansion zone, the force to break out the anchor from the bearing base reaches 18 kN
  • The dowel side prevents the appearance of a cold bridge and the occurrence of contact corrosion
  • Developed stops prevent the dowel from rolling in the hole at the time of installation
  • The presence of an impact stop prevents premature wedging of the dowel
  • Spacer Wall V2E is made of high strength stainless steel in accordance with the international standard ISO
  • Corrosion resistance to medium aggressive environment for at least 50 years
  • Optimized threaded zone gives low torsional resistance and high tightening torque
  • Versatility for all types of building materials
  • All mounts are pre-assembled
  • Product strength class 10.9 according to GOST R 52627-2006
  • Anchor material: high-quality polyamide with high strength characteristics
  • Spacer wedge material: Stainless steel
Anchor length Diameter of the hole Min. anchoring depth Max thickness of attachment Min. hole depth
mm mm mm mm mm
80 10 70 10 100
Dowel W1, hole diameter 10 mm, length 120 mm [Code number: 00426005]
Details
00426005 49 rub
Dowel W1, hole diameter 10 mm, length 120 mm, GEO [Code number: 00426006]
Details
00426006 57 rub
Anchor MTA, M12 x 120 [Code number: 00428401]
Details
00428401 176 rub

Application purpose:

  • For reliable connection of support elements with the base material

Characteristics:

  • Base material: Concrete (B20-B60), natural stone
  • Easy installation
  • For static and quasi-static loads
  • High bearing capacity
  • Anchor material: cold rolled steel, zinc coating ≥5 μm
  • Clip material: cold rolled steel, zinc coating ≥40 μm
  • Nut material: zinc coated steel ≥5 μm (DIN 934)
  • Washer material: zinc coated steel ≥5 μm (DIN 125, DIN 9021)
Diameter of the hole Depth of anchor installation Max. thickness of the material to be fixed Tightening torque
mm mm mm N*m
12 77 28 60

Download passport of product: Termoclip Anchor MTA Termoclip Anchor MTA

Anchor MTA, M8 x 75 [Code number: 00428201]
Details
00428201 86 rub

Application purpose:

  • For reliable connection of support elements with the base material

Characteristics:

  • Base material: Concrete (B20-B60), natural stone
  • Easy installation
  • For static and quasi-static loads
  • High bearing capacity
  • Anchor material: cold rolled steel, zinc coating ≥5 μm
  • Clip material: cold rolled steel, zinc coating ≥40 μm
  • Nut material: zinc coated steel ≥5 μm (DIN 934)
  • Washer material: zinc coated steel ≥5 μm (DIN 125, DIN 9021)
Diameter of the hole Depth of anchor installation Max. thickness of the material to be fixed Tightening torque
mm mm mm N*m
8 59 5 20

Download passport of product: Termoclip Anchor MTA Termoclip Anchor MTA

Anchor MTP-G, M8 x 75 [Code number: 00427201]
Details
00427201 182 rub

Application purpose:

  • For reliable connection of support elements with the base material

Characteristics:

  • Base material: Concrete (B20-B60), compressed and stretched concrete zones, natural stone
  • Easy installation
  • Application in compressed and stretched concrete areas
  • For static and dynamic loads
  • Use in dry and wet aggressive environments
  • High bearing capacity
  • Fire resistant compound (R30-R120)
  • Earthquake Resistance (C1, C2)
  • Anchor material: carbon steel with thermal diffusion coating ≥40 μm
  • Clip material: A4 stainless steel
  • Nut material: Thermally Diffusion Coated Steel ≥40 μm (DIN 934)
  • Washer material: steel with thermal diffusion coating ≥40 μm (DIN 125, DIN 9021)
Diameter of the hole Depth of anchor installation Max. thickness of the material to be fixed Tightening torque
mm mm mm N*m
8 55 9 20

Download passport of product: Termoclip Anchor MTP-G Termoclip Anchor MTP-G

Anchor MTP-G, M10 x 115 [Code number: 00427302]
Details
00427302 306 rub

Application purpose:

  • For reliable connection of support elements with the base material

Characteristics:

  • Base material: Concrete (B20-B60), compressed and stretched concrete zones, natural stone
  • Easy installation
  • Application in compressed and stretched concrete areas
  • For static and dynamic loads
  • Use in dry and wet aggressive environments
  • High bearing capacity
  • Fire resistant compound (R30-R120)
  • Earthquake Resistance (C1, C2)
  • Anchor material: carbon steel with thermal diffusion coating ≥40 μm
  • Clip material: A4 stainless steel
  • Nut material: Thermally Diffusion Coated Steel ≥40 μm (DIN 934)
  • Washer material: steel with thermal diffusion coating ≥40 μm (DIN 125, DIN 9021)
Diameter of the hole Depth of anchor installation Max. thickness of the material to be fixed Tightening torque
mm mm mm N*m
10 68 35 40

Download passport of product: Termoclip Anchor MTP-G Termoclip Anchor MTP-G

Anchor HENO, M12 x 50 [Code number: 00429401]
Details
00429401 79 rub

Application purpose:

  • For reliable connection of support elements with the base material

Characteristics:

  • Base material: Concrete (B20-B60), compressed and stretched concrete zones
  • Easy installation
  • For static and quasi-static loads
  • High bearing capacity
  • Fire resistant compound
  • Anchor rod material: carbon steel, zinc coating ≥5 μm
Diameter of the hole Depth of anchor installation Installation tool Tightening torque
mm mm   N*m
15 50 EXHB М12 38

Download passport of product: Termoclip Anchor HENO Termoclip Anchor HENO

See also