Pipes | Inrusstrade

Cross-linked polyethylene pipes quickly gained popularity due to the favorable price-quality ratio.

Sinicon launched a new line of cross-linked polyethylene pipes for heating and water supply systems. Thermoline pipes are made of high density polyethylene with crosslinking by the silane method.

The minimum crosslinking of PE-X pipes can be 60%, 65% or 70%. The degree of crosslinking does not significantly affect the technical characteristics of the pipes.

Main advantages:

low hydraulic resistance;
elasticity;
not susceptible to corrosion and overgrowing;
the presence of temperature memory;
chemical and electrical inertness;
resistance to freezing water;
ease of installation.

Outside the pipes are covered with a layer of EVOH (ethylene vinyl alcohol), which prevents the diffusion of oxygen molecules into the pipe, which reduces the overgrowth of the bore and wear of heating equipment due to oxidative processes.

Pipes with diameters of 16 and 20 mm are available. The wall thickness is 2.0 mm. Pipes are supplied in bays.

Connection type: pressing.

Pipe РЕ-RT, Type II

Pipe PE-RT, SDR8

Pipe PE-Xb EVOH, SDR 8

Pipe PE-Xb EVOH, SDR 7.4

Pipe PE-Xb EVOH, SDR 10

Pipe PERT, SDR10

Article

Diameter

Length, m

Article

Diameter

Length, m

Article

Diameter

Length, m

Article

Diameter

Length, m

Article

Diameter

Length, m

Article

Diameter

Length, m

PRT162010EII

16*2.0

100

PT162010

16*2.0

100

PX162010

16*2.0

100

PX162210

16*2.0

100

PX202010

20*2.0

100

PT202010

20*2.0

100

PRT162020EII

16*2.0

200

PT162020

16*2.0

200

PX162020

16*2.0

200

PX162220

16*2.0

200

PX202020

20*2.0

200

PT202020

20*2.0

200

PRT162030EII

16*2.0

300

PX162030

16*2.0

300

PX162230

16*2.0

300

PRT162040EII

16*2.0

400

PT162040

16*2.0

400

PX162040

16*2.0

400

PX162240

16*2.0

400

Photo Наименование Article Цена

SINIKON PE-RT Pipe, SDR8/S3.5, d - 16*2.0, length 100 m, price for 1 m [Code number: PT162010]

Details

PT162010

35 rub

Purpose of use:

For hot water supply
For cold water supply
For heating systems
For pipes connected using axial fittings

Main characteristics of PEX pipes:

low hydraulic resistance;
resistance to corrosion and fouling;
high chemical and electrical inertness;
temperature memory;
high elasticity;
working pressure up to 8 bar (depending on the temperature of the coolant);
the material does not collapse when water freezes.

Connection: axial pressing.

Material: cross-linked polyethylene with increased heat resistance (PE-RT, type I).

Maximum coolant temperature: +80 °C.

Thermal conductivity: 0.38 W/m*K.

Roughness: 0.007 mm.

SDR value: SDR 8.

Design pipe series: S 3.5.

Technical specifications

d, mm	Wall thickness, mm	Length, m	Colour
16	2.0	100	red

SINIKON PE-RT Pipe, SDR8/S3.5, d - 16*2.0, length 200 m, price for 1 m [Code number: PT162020]

Details

PT162020

35 rub

Purpose of use:

For hot water supply
For cold water supply
For heating systems
For pipes connected using axial fittings

Main characteristics of PEX pipes:

low hydraulic resistance;
resistance to corrosion and fouling;
high chemical and electrical inertness;
temperature memory;
high elasticity;
working pressure up to 8 bar (depending on the temperature of the coolant);
the material does not collapse when water freezes.

Connection: axial pressing.

Material: cross-linked polyethylene with increased heat resistance (PE-RT, type I).

Maximum coolant temperature: +80 °C.

Thermal conductivity: 0.38 W/m*K.

Roughness: 0.007 mm.

SDR value: SDR 8.

Design pipe series: S 3.5.

Technical specifications

d, mm	Wall thickness, mm	Length, m	Colour
16	2.0	200	red

SINIKON PE-RT Pipe, SDR8/S3.5, d - 16*2.0, length 400 m, price for 1 m [Code number: PT162040]

Details

PT162040

35 rub

Purpose of use:

For hot water supply
For cold water supply
For heating systems
For pipes connected using axial fittings

Main characteristics of PEX pipes:

low hydraulic resistance;
resistance to corrosion and fouling;
high chemical and electrical inertness;
temperature memory;
high elasticity;
working pressure up to 8 bar (depending on the temperature of the coolant);
the material does not collapse when water freezes.

Connection: axial pressing.

Material: cross-linked polyethylene with increased heat resistance (PE-RT, type I).

Maximum coolant temperature: +80 °C.

Thermal conductivity: 0.38 W/m*K.

Roughness: 0.007 mm.

SDR value: SDR 8.

Design pipe series: S 3.5.

Technical specifications

d, mm	Wall thickness, mm	Length, m	Colour
16	2.0	400	red

SINIKON PERT Pipe, SDR10/S4.5, d - 20*2.0, length 100 m, price for 1 m [Code number: PT202010]

Details

PT202010

46 rub

Purpose of use:

For hot water supply
For cold water supply
For heating systems
For pipes connected using axial fittings

Main characteristics of PEX pipes:

low hydraulic resistance;
resistance to corrosion and fouling;
high chemical and electrical inertness;
temperature memory;
high elasticity;
working pressure up to 6 bar (depending on the temperature of the coolant);
the material does not collapse when water freezes.

Connection: axial pressing.

Material: cross-linked polyethylene with increased heat resistance (PE-RT, type I).

Maximum coolant temperature: +80 °C.

Thermal conductivity: 0.38 W/m*K.

Roughness: 0.007 mm.

SDR value: SDR 10.

Design pipe series: S 4.5.

Technical specifications

d, mm	Wall thickness, mm	Length, m	Colour
20	2.0	100	red

SINIKON PERT Pipe, SDR10/S4.5, d - 20*2.0, length 200 m, price for 1 m [Code number: PT202020]

Details

PT202020

46 rub

Purpose of use:

For hot water supply
For cold water supply
For heating systems
For pipes connected using axial fittings

Main characteristics of PEX pipes:

low hydraulic resistance;
resistance to corrosion and fouling;
high chemical and electrical inertness;
temperature memory;
high elasticity;
working pressure up to 6 bar (depending on the temperature of the coolant);
the material does not collapse when water freezes.

Connection: axial pressing.

Material: cross-linked polyethylene with increased heat resistance (PE-RT, type I).

Maximum coolant temperature: +80 °C.

Thermal conductivity: 0.38 W/m*K.

Roughness: 0.007 mm.

SDR value: SDR 10.

Design pipe series: S 4.5.

Technical specifications

d, mm	Wall thickness, mm	Length, m	Colour
20	2.0	200	red

(TEMPORARILY NOT AVAILABLE) - SINIKON THERMOLINE PE-Xb EVOH Pipe, SDR 8/S3.5, d - 16*2.0, length 100 m, price for 1 m [Code number: PX162010]

Details

PX162010

Application purposes:

For cold and hot water systems
For heating, including underfloor heating systems

Material: Silane crosslinked high density PE, EVOH oxygen barrier layer.

The pipe complies with GOST 32415.

Coefficient of thermal expansion: 0.14 - 0.20 mm/m*K.

Thermal conductivity: 0.38 W/m*K.

Roughness: 0.007 mm.

Oxygen permeability: & le; 3.6 mg/m2*day at 80°C.

Characteristic:

low hydraulic resistance;
not susceptible to corrosion and fouling;
chemical and electrical inertness;
high elasticity;
temperature memory available;
pipes do not collapse when water freezes;
warranty period - 10 years.

Outside diameter	Wall thickness	Inside diameter	Colour	Length
mm	mm	mm		m
16	2.0	12	red	100

Table of classes of operation of polymer pipelines PEX and PERT

(NO LONGER PRODUCED) - SINIKON THERMOLINE PE-Xb EVOH Pipe, SDR8/S3.5, d - 16*2.0, length 100 m, price for 1 m [Code number: PX162010V]

Details

PX162010V

Application purposes:

For cold and hot water systems
For heating, including underfloor heating systems

Material: Silane crosslinked high density PE, EVOH oxygen barrier layer.

The pipe complies with GOST 32415.

Coefficient of thermal expansion: 0.14 - 0.20 mm/m*K.

Thermal conductivity: 0.38 W/m*K.

Roughness: 0.007 mm.

Oxygen permeability: & le; 3.6 mg/m2*day at 80°C.

Characteristic:

low hydraulic resistance;
not susceptible to corrosion and fouling;
chemical and electrical inertness;
high elasticity;
temperature memory available;
pipes do not collapse when water freezes;
warranty period - 10 years.

Outside diameter	Wall thickness	Inside diameter	Water volume	Service class / Working pressure	Length	Weight	Weight with water
mm	mm	mm	l/m		m	g/m	g/m
16	2	12	0.113	1-2-4 / 1.0 MPa 5 / 0.8 MPa	100	91	203

Table of classes of operation of polymer pipelines PEX and PERT

(TEMPORARILY NOT AVAILABLE) - SINIKON THERMOLINE PE-Xb EVOH Pipe, SDR 8/S3.5, d - 16*2.0, length 200 m, price for 1 m [Code number: PX162020]

Details

PX162020

Application purposes:

For cold and hot water systems
For heating, including underfloor heating systems

Material: Silane crosslinked high density PE, EVOH oxygen barrier layer.

The pipe complies with GOST 32415.

Coefficient of thermal expansion: 0.14 - 0.20 mm/m*K.

Thermal conductivity: 0.38 W/m*K.

Roughness: 0.007 mm.

Oxygen permeability: & le; 3.6 mg/m2*day at 80°C.

Characteristic:

low hydraulic resistance;
not susceptible to corrosion and fouling;
chemical and electrical inertness;
high elasticity;
temperature memory available;
pipes do not collapse when water freezes;
warranty period - 10 years.

Outside diameter	Wall thickness	Inside diameter	Colour	Length
mm	mm	mm		m
16	2.0	12	red	200

Table of classes of operation of polymer pipelines PEX and PERT

(NO LONGER PRODUCED) - SINIKON THERMOLINE PE-Xb EVOH Pipe, SDR8/S3.5, d - 16*2.0, length 200 m, price for 1 m [Code number: PX162020V]

Details

PX162020V

Application purposes:

For cold and hot water systems
For heating, including underfloor heating systems

Material: Silane crosslinked high density PE, EVOH oxygen barrier layer.

The pipe complies with GOST 32415.

Coefficient of thermal expansion: 0.14 - 0.20 mm/m*K.

Thermal conductivity: 0.38 W/m*K.

Roughness: 0.007 mm.

Oxygen permeability: & le; 3.6 mg/m2*day at 80°C.

Characteristic:

low hydraulic resistance;
not susceptible to corrosion and fouling;
chemical and electrical inertness;
high elasticity;
temperature memory available;
pipes do not collapse when water freezes;
warranty period - 10 years.

Outside diameter	Wall thickness	Inside diameter	Water volume	Service class / Working pressure	Length	Weight	Weight with water
mm	mm	mm	l/m		m	g/m	g/m
16	2	12	0.113	1-2-4 / 1.0 MPa 5 / 0.8 MPa	200	91	203

Table of classes of operation of polymer pipelines PEX and PERT

(TEMPORARILY NOT AVAILABLE) - SINIKON THERMOLINE PE-Xb EVOH Pipe, SDR 8/S3.5, d - 16*2.0, length 300 m, price for 1 m [Code number: PX162030]

Details

PX162030

Application purposes:

For cold and hot water systems
For heating, including underfloor heating systems

Material: Silane crosslinked high density PE, EVOH oxygen barrier layer.

The pipe complies with GOST 32415.

Coefficient of thermal expansion: 0.14 - 0.20 mm/m*K.

Thermal conductivity: 0.38 W/m*K.

Roughness: 0.007 mm.

Oxygen permeability: & le; 3.6 mg/m2*day at 80°C.

Characteristic:

low hydraulic resistance;
not susceptible to corrosion and fouling;
chemical and electrical inertness;
high elasticity;
temperature memory available;
pipes do not collapse when water freezes;
warranty period - 10 years.

Outside diameter	Wall thickness	Inside diameter	Colour	Length
mm	mm	mm		m
16	2.0	12	red	300

Table of classes of operation of polymer pipelines PEX and PERT

(NO LONGER PRODUCED) - SINIKON THERMOLINE PE-Xb EVOH Pipe, SDR8/S3.5, d - 16*2.0, length 300 m, price for 1 m [Code number: PX162030V]

Details

PX162030V

Application purposes:

For cold and hot water systems
For heating, including underfloor heating systems

Material: Silane crosslinked high density PE, EVOH oxygen barrier layer.

The pipe complies with GOST 32415.

Coefficient of thermal expansion: 0.14 - 0.20 mm/m*K.

Thermal conductivity: 0.38 W/m*K.

Roughness: 0.007 mm.

Oxygen permeability: & le; 3.6 mg/m2*day at 80°C.

Characteristic:

low hydraulic resistance;
not susceptible to corrosion and fouling;
chemical and electrical inertness;
high elasticity;
temperature memory available;
pipes do not collapse when water freezes;
warranty period - 10 years.

Outside diameter	Wall thickness	Inside diameter	Water volume	Service class / Working pressure	Length	Weight	Weight with water
mm	mm	mm	l/m		m	g/m	g/m
16	2.0	12	0.113	1-2-4 / 1.0 MPa 5 / 0.8 MPa	300	91	203

Table of classes of operation of polymer pipelines PEX and PERT

(TEMPORARILY NOT AVAILABLE) - SINIKON THERMOLINE PE-Xb EVOH Pipe, SDR 8/S3.5, d - 16*2.0, length 400 m, price for 1 m [Code number: PX162040]

Details

PX162040

Application purposes:

For cold and hot water systems
For heating, including underfloor heating systems

Material: Silane crosslinked high density PE, EVOH oxygen barrier layer.

The pipe complies with GOST 32415.

Coefficient of thermal expansion: 0.14 - 0.20 mm/m*K.

Thermal conductivity: 0.38 W/m*K.

Roughness: 0.007 mm.

Oxygen permeability: & le; 3.6 mg/m2*day at 80°C.

Characteristic:

low hydraulic resistance;
not susceptible to corrosion and fouling;
chemical and electrical inertness;
high elasticity;
temperature memory available;
pipes do not collapse when water freezes;
warranty period - 10 years.

Outside diameter	Wall thickness	Inside diameter	Colour	Length
mm	mm	mm		m
16	2.0	12	red	400

Table of classes of operation of polymer pipelines PEX and PERT

(NO LONGER PRODUCED) - SINIKON THERMOLINE PE-Xb EVOH Pipe, SDR8/S3.5, d - 16*2.0, length 400 m, price for 1 m [Code number: PX162040V]

Details

PX162040V

Application purposes:

For cold and hot water systems
For heating, including underfloor heating systems

Material: Silane crosslinked high density PE, EVOH oxygen barrier layer.

The pipe complies with GOST 32415.

Coefficient of thermal expansion: 0.14 - 0.20 mm/m*K.

Thermal conductivity: 0.38 W/m*K.

Roughness: 0.007 mm.

Oxygen permeability: & le; 3.6 mg/m2*day at 80°C.

Characteristic:

low hydraulic resistance;
not susceptible to corrosion and fouling;
chemical and electrical inertness;
high elasticity;
temperature memory available;
pipes do not collapse when water freezes;
warranty period - 10 years.

Outside diameter	Wall thickness	Inside diameter	Water volume	Service class / Working pressure	Length	Weight	Weight with water
mm	mm	mm	l/m		m	g/m	g/m
16	2.0	12	0,113	1-2-4 / 1.0 MPa 5 / 0.8 MPa	400	91	203

Table of classes of operation of polymer pipelines PEX and PERT

(TEMPORARILY NOT AVAILABLE) - SINIKON THERMOLINE PE-Xb EVOH Pipe, SDR 7.4/S3.2, d - 16*2.2, length 100 m, price for 1 m [Code number: PX162210]

Details

PX162210

Application purposes:

For cold and hot water systems
For heating, including underfloor heating systems

Material: Silane crosslinked high density PE, EVOH oxygen barrier layer.

The pipe complies with GOST 32415.

Coefficient of thermal expansion: 0.14 - 0.20 mm/m*K.

Thermal conductivity: 0.38 W/m*K.

Roughness: 0.007 mm.

Oxygen permeability: & le; 3.6 mg/m2*day at 80°C.

Characteristic:

low hydraulic resistance;
not susceptible to corrosion and fouling;
chemical and electrical inertness;
high elasticity;
temperature memory available;
pipes do not collapse when water freezes;
warranty period - 10 years.

Outside diameter	Wall thickness	Inside diameter	Colour	Length
mm	mm	mm		m
16	2.2	12	Gray	100

Table of classes of operation of polymer pipelines PEX and PERT

(TEMPORARILY NOT AVAILABLE) - SINIKON THERMOLINE PE-Xb EVOH Pipe, SDR 7.4/S3.2, d - 16*2.2, length 200 m, price for 1 m [Code number: PX162220]

Details

PX162220

Application purposes:

For cold and hot water systems
For heating, including underfloor heating systems

Material: Silane crosslinked high density PE, EVOH oxygen barrier layer.

The pipe complies with GOST 32415.

Coefficient of thermal expansion: 0.14 - 0.20 mm/m*K.

Thermal conductivity: 0.38 W/m*K.

Roughness: 0.007 mm.

Oxygen permeability: & le; 3.6 mg/m2*day at 80°C.

Characteristic:

low hydraulic resistance;
not susceptible to corrosion and fouling;
chemical and electrical inertness;
high elasticity;
temperature memory available;
pipes do not collapse when water freezes;
warranty period - 10 years.

Outside diameter	Wall thickness	Inside diameter	Colour	Length
mm	mm	mm		m
16	2.2	16	Gray	200

Table of classes of operation of polymer pipelines PEX and PERT

(TEMPORARILY NOT AVAILABLE) - SINIKON THERMOLINE PE-Xb EVOH Pipe, SDR 7.4/S3.2, d - 16*2.2, length 300 m, price for 1 m [Code number: PX162230]

Details

PX162230

Application purposes:

For cold and hot water systems
For heating, including underfloor heating systems

Material: Silane crosslinked high density PE, EVOH oxygen barrier layer.

The pipe complies with GOST 32415.

Coefficient of thermal expansion: 0.14 - 0.20 mm/m*K.

Thermal conductivity: 0.38 W/m*K.

Roughness: 0.007 mm.

Oxygen permeability: & le; 3.6 mg/m2*day at 80°C.

Characteristic:

low hydraulic resistance;
not susceptible to corrosion and fouling;
chemical and electrical inertness;
high elasticity;
temperature memory available;
pipes do not collapse when water freezes;
warranty period - 10 years.

Outside diameter	Wall thickness	Inside diameter	Colour	Length
mm	mm	mm		m
16	2,2	12	gray	300

Table of classes of operation of polymer pipelines PEX and PERT

(TEMPORARILY NOT AVAILABLE) - SINIKON THERMOLINE PE-Xb EVOH Pipe, SDR 7.4/S3.2, d - 16*2.2, length 400 m, price for 1 m [Code number: PX162240]

Details

PX162240

Application purposes:

For cold and hot water systems
For heating, including underfloor heating systems

Material: Silane crosslinked high density PE, EVOH oxygen barrier layer.

The pipe complies with GOST 32415.

Coefficient of thermal expansion: 0.14 - 0.20 mm/m*K.

Thermal conductivity: 0.38 W/m*K.

Roughness: 0.007 mm.

Oxygen permeability: & le; 3.6 mg/m2*day at 80°C.

Characteristic:

low hydraulic resistance;
not susceptible to corrosion and fouling;
chemical and electrical inertness;
high elasticity;
temperature memory available;
pipes do not collapse when water freezes;
warranty period - 10 years.

Outside diameter	Wall thickness	Inside diameter	Colour	Length
mm	mm	mm		m
16	2.2	12	gray	400

Table of classes of operation of polymer pipelines PEX and PERT

(TEMPORARILY NOT AVAILABLE) - SINIKON THERMOLINE PE-Xb EVOH Pipe, SDR 10/S4.5, d - 20*2.0, length 100 m, price for 1 m [Code number: PX202010]

Details

PX202010

Application purposes:

For cold and hot water systems
For heating, including underfloor heating systems

Material: Silane crosslinked high density PE, EVOH oxygen barrier layer.

The pipe complies with GOST 32415.

Coefficient of thermal expansion: 0.14 - 0.20 mm/m*K.

Thermal conductivity: 0.38 W/m*K.

Roughness: 0.007 mm.

Oxygen permeability: & le; 3.6 mg/m2*day at 80°C.

Characteristic:

low hydraulic resistance;
not susceptible to corrosion and fouling;
chemical and electrical inertness;
high elasticity;
temperature memory available;
pipes do not collapse when water freezes;
warranty period - 10 years.

Outside diameter	Wall thickness	Inside diameter	Colour	Length
mm	mm	mm		m
20	2.0	16	red	100

Table of classes of operation of polymer pipelines PEX and PERT

(NO LONGER PRODUCED) - SINIKON THERMOLINE PE-Xb EVOH Pipe, SDR10/S4.5, d - 20*2.0, length 100 m, price for 1 m [Code number: PX202010V]

Details

PX202010V

Application purposes:

For cold and hot water systems
For heating, including underfloor heating systems

Material: Silane crosslinked high density PE, EVOH oxygen barrier layer.

The pipe complies with GOST 32415.

Coefficient of thermal expansion: 0.14 - 0.20 mm/m*K.

Thermal conductivity: 0.38 W/m*K.

Roughness: 0.007 mm.

Oxygen permeability: & le; 3.6 mg/m2*day at 80°C.

Characteristic:

low hydraulic resistance;
not susceptible to corrosion and fouling;
chemical and electrical inertness;
high elasticity;
temperature memory available;
pipes do not collapse when water freezes;
warranty period - 10 years.

Outside diameter	Wall thickness	Inside diameter	Water volume	Service class / Working pressure	Length	Weight	Weight with water
mm	mm	mm	l/m		m	g/m	g/m
20	2	16	0,201	1-2-4 / 0,8 MPa 5 / 0,6 MPa	100	116	317

Table of classes of operation of polymer pipelines PEX and PERT

(TEMPORARILY NOT AVAILABLE) - SINIKON THERMOLINE PE-Xb EVOH Pipe, SDR 10/S4.5, d - 20*2.0, length 200 m, price for 1 m [Code number: PX202020]

Details

PX202020

Application purposes:

For cold and hot water systems
For heating, including underfloor heating systems

Material: Silane crosslinked high density PE, EVOH oxygen barrier layer.

The pipe complies with GOST 32415.

Coefficient of thermal expansion: 0.14 - 0.20 mm/m*K.

Thermal conductivity: 0.38 W/m*K.

Roughness: 0.007 mm.

Oxygen permeability: & le; 3.6 mg/m2*day at 80°C.

Characteristic:

low hydraulic resistance;
not susceptible to corrosion and fouling;
chemical and electrical inertness;
high elasticity;
temperature memory available;
pipes do not collapse when water freezes;
warranty period - 10 years.

Outside diameter	Wall thickness	Inside diameter	Colour	Length
mm	mm	mm		m
20	2.0	16	red	200

Table of classes of operation of polymer pipelines PEX and PERT

Pipes made of cross-linked polyethylene Sinicon Thermoline

Technical specifications

Technical specifications

Technical specifications

Technical specifications

Technical specifications

See also