Extension HL 350.1H is designed for increasing length of the HL drains. Height is 225 mm, and diameter is 145 mm. It has bitumen membrane d 500 mm.

The HL company produces taper HL 801R/M63-50 specially for using in combination with HL801. For pipes d 28mm - d 38mm. Thread is M63-50.

Test plug HL 42.B have diameter of 1/2". It is made of polypropylene, and it is painted in blue color.

Sealing set HL 8300.Н is equipped with flange d 148x238 mm, gasket and pre-sealed bitumen collar 500x500 mm. Comes with screws.

See examples of mounting the product: Sealing set HL 8300.Н

Extension FlexDrain HL 370 has stainless steel grate frame 147 x 147 mm and grate. Diameter is 145 mm. It is made of ABS.

Extension HL 618 has flange d 315 mm, it is made of polypropylene. Height is 155 mm.

Blind plug HL 801B/M40 is used in combination with multiple pipe fairlead HL 801. Weight is 20 gr. For closure of wholes M40.

Socket connector HL 9/7/1 have diameter of 75/110 mm. It is made of polypropylene. The socket connector is used for connection PP or PVC non-pressure pipes and plastic sewage equipment to steel or cast-iron socketless pipes. It have resistance to high and low temperatures, and it can withstand  pressure up to 5 meters of water column.

Socket connector HL 9/50ET is used for push-fit connections between Eternit and plastic pipes.

Screw joint HL 801V/32-44 is used in in combination with HL 801 (М63) for pushing through pipes or cables from d 32 mm to d 44 mm.

Extension HL 65 is made of polypropylene, diameter of this extension is 125 mm. Extension is equipped with stainless steel clamping ring. Extensions height is 345 mm. This device is designed for tightly connection a drain and waterproofing.

Download example of use: Extension HL 65

Extension HL 65F is made of polypropylene, diameter of this extension is 125 mm. Extension is equipped with PP-flange for welding of FPO-sheeting. Extensions height is 345 mm. This device is designed for tightly connection a drain and waterproofing. The extension is cut to the desired height easily, and the HL Company ensure that the extensions will serve at least 50 years.

Download example of use: Extension HL 65F

Waterproofing kit HL 83.P is equipped with flange PVC d 287 mm and gasket. Comes with screws.

Drainage extension HL 636 is made of PUR, it has size of 362*362*100 mm.

Rodding eye HL 98SML is designed for flush mounting of sewer systems, it is mounted to socketless cast iron SML pipes. The body of rodding eye is made of polypropylene, and grate and cover are made of stainless steel. Diameter is 110 mm, the grate size is 150*150 mm.

Fire collar HL 850 is designed for HL317 series, it prevents the spread of high temperature, flame, smoke and toxic substances. This product consists of a metal holder with fire retardant intumescent material. Also it is equipped with built-in hangers and sound proofing collar. It is mounted to drains DN50/75. Limit of fire resistance is EI 90.

Download data sheet: Fire collar HL 850

Sealing kit HL 86.M has stainless steel flange, it is equipped with gasket and laminated fleece. Comes with screws 6,3x16mm.

Waterproofing kit HL 84.H is equipped with flange 220 x 155 mm, clamping ring, adapter and bitumen membrane d 500 mm. Comes with lot cover. It is made of stainless steel, it weights 1707 gr.

Socket connector HL 9/1 have diameter of 110 mm. It is made of polypropylene. The socket connector is used for connection PP or PVC non-pressure pipes and plastic sewage equipment to steel or cast-iron socketless pipes. It can withstand  pressure up to 5 meters of water column. It remains serviceable at very high temperatures (up to + 100 °C) and at very low temperatures (down to -50 °C).

Waterproofing kit HL 86.0 has clamping ring 280 x 200 mm, it is equipped with gaske and screws.

Test plug HL 43.R have diameter of 3/4". It is made of polypropylene, and it is painted in red colour.

Grate HL 052.3 - 300 x 100 is designed for HL 52K. It is made of satin black stainless steel. Size of grate is 300х100 mm, and height of the element can be up to 15 mm. Weight is 1480 gr.

Screw joint HL 801V/11-18 is used in in combination with HL801 (М25) for pushing through pipes or cables from d 11 mm to d 18 mm.

The HL company produces taper HL 801R/M40-25 specially for models HL 801V/8-14 and HL 801V/11-18 which are used for optimal connection of pipes (d 8mm - d 14mm or d 11mm - d 18mm) and hydro insulation on the cellar wall. Thread is M40-25.

Fire collar HL 860 is designed for HL-perfect series, it prevents the spread of high temperature, flame, smoke and toxic substances. This product consists of a metal holder with fire retardant intumescent material. Also it is equipped with built-in hangers and sound proofing collar. It is mounted to drains HL 606 - HL 616 series DN110. Limit of fire resistance is EI 90.

Download data sheet: Fire collar HL 860

Blind plug HL 801B/M63 is used in combination with multiple pipe fairlead HL 801. Weight is 80 gr. For closure of wholes M63.

Grate HL 052.1 - 300 x 100 is designed for HL 52K. It is made of silk finished stainless steel. Size of grate is 300х100 mm, and height of the element can be up to 15 mm. Weight is 1462 gr.

Sealing kit HL 83.M has stainless steel flange, it is equipped with laminated fleece and gasket. Comes with screws.

Special test plug HL 42B.MS have diameter of 1/2". It is made of brass and polypropylene, and it is painted in blue color.

Drainage element HL 161 made of polypropylene, it is intended to be used with roof drain series HL62, HL64 and HL65.

Adapter HL 40.3 is used for connection non-pressure pipes to threaded pipes. Diameter of non-pressure pipe is 40 mm and diameter of threaded pipe is 3/4".

Extension HL 350.0 is designed for increasing length of the HL drains. Diameter is 145 mm. Fits to roof drain series HL62, HL64 and HL69.

Extension HL 85NC is equipped with CeraDrain collar made of polymer concrete. The CeraDrain collar is equipped with fit-up aid kit and steel mesh. Also the extension has O-ring and plastic mesh for a label ceramic tile. Tiles are glued to thin layer of mastic. Diameter of the extension is 110 mm.

Extension HL 350 is designed for increasing length of the HL drains, roof outlets and extension HL 350.0. Height is 155 mm, and diameter is 145 mm.

Grate HL 037N.33E is designed  for HL drains. It is made of stainless steel, and the grate have coat "dark bronze". Size of the grate is 115*115 mm.

Grate HL 037N.32E is designed for HL drains. It is made of stainless steel, and the grate is covered with bronze. Size of the grate is 115*115 mm.

The HL company produces taper HL 801R/M50-40 specially for model HL 801V/22-33 which is used for optimal connection of pipes (d 22mm - d 33mm) and hydro insulation on the cellar wall. Thread is M50-40.

Grate HL 052.2 - 300 x 100 is designed for HL 52K. It is made of polished stainless steel. Size of grate is 300х100 mm, and height of the element can be up to 15 mm. Weight is 1408 gr.

Visible parts chrome HL 0530.С are manufactured special for HL 530 by HL Company. This product is made of ABS, its size is 150х150 mm and weight is 200 gr.

Blind plug HL 801B/M50 is used in combination with multiple pipe fairlead HL 801. Weight is 50 gr. For closure of wholes M50.

Grate HL 052.4 - 300 x 100 is designed for HL 52K. It is made of aeruginous bronze stainless steel. Size of grate is 300х100 mm, and height of the element can be up to 15 mm. Weight is 1480 gr.

Screw joint HL 801V/17-25 is used in in combination with HL 801 (М32) for pushing through pipes or cables from d 17mm to d 25mm.

Roof ventpipe fitting HL 805 have diameter of 50 mm. The roof ventpipe fitting is mounted to pipework of wastewater system that is output above the roof, so that leaves did not fall into the sewer. It is made of polypropylene.

Adapter HL 30.2 is used for connection non-pressure pipes to threaded pipes. Diameter of non-pressure pipe is 32 mm and diameter of threaded pipe is 1/2".

Adapter HL 41.2 is used for connection non-pressure pipes to threaded pipes. Diameter of non-pressure pipe is 50 mm and diameter of threaded pipe is 1/2".

Test plug HL 43.B have diameter of 3/4". It is made of polypropylene, and it is painted in blue color.

Adapter HL 40.4 is used for connection non-pressure pipes to threaded pipes. Diameter of non-pressure pipe is 40 mm and diameter of threaded pipe is 1". The adapter is made of polyethylene.

Test plug HL 42.R have diameter of 1/2". It is made of polypropylene, and it is painted in red colour.

Test plug HL 45 have diameter of 32/40/50 mm. It is made of polypropylene, weight is 27 gr.

Trap HL 610 have diameter of 110 mm. It is made of polypropylene. Weight is 670 gr, and height is 260 mm.

Extension HL 618H has bitumen membrane d 500 mm and O-ring, it is made of polypropylene. Height is 160 mm.

Extension HL 620 is equipped with O-ring. Height is 125 mm, and diameter is 195 mm. It can be used only with major drains of "perfect series".

Extension HL 65H is made of polypropylene, diameter of this extension is 125 mm. Extension is equipped with bitumen membrane d 500 mm. Extensions height is 345 mm. This device is designed for tightly connection a drain and waterproofing.
Extensions can operate at low and high temperatures - of -50 to +100 degrees.

Download data sheet: Extension HL 65H

Sealing kit HL 8300.PP is equipped with solid PVC flange d 350 mm and gasket. Comes with screws.

Waterproofing kit HL 84.CU has copper sheet d 500 mm, it is equipped with flange gasket 280x165 mm. Waterproofing kit is intended for the roof outlets series HL 62 and HL-64.

Sealing kit HL 84.M has stainless steel flange, it is equipped with gasket, lot cover, plastic spacer and laminated fleece.

The  HL Company recommends using extension HL 85NH for improving of the HL drains design. The extension has O-ring and bitumen membrane. Its diameter is 110 mm, height is 106 mm. It is made of polypropylene.

Waterproofing kit HL 83 is made of stainless steel, it is equipped with EPDM collar d 500 mm, clamping ring 200 x 115 mm and gasket. Comes with screws.

Rodding eye HL 98 is designed for flush mounting of sewer systems, it is mounted to PVC and PP pipes. The body of rodding eye is made of polypropylene, and grate is made of stainless steel. Diameter is 110 mm, the grate size is 150*150 mm. Comes with stainless steel screws.

Waterproofing kit HL 83.H is made of stainless steel, it is equipped with clamping ring 200 x 115 mm, bitumen membrane d 500 mm and gasket. Comes with screws.

Sealing kit HL 8300.М is equipped with flange, gasket and laminated fleece. Comes with screws.

Sealing kit HL 8300.P is equipped with solid PP flange d 350 mm and gasket. Comes with screws.

Waterproofing kit HL 84 is equipped with flange 220 x 155 mm, clamping ring, adapter and EPDM collar d 500 mm. Comes with lot cover.

Waterproofing kit HL 84.0 is equipped with flange 220 x 155 mm, clamping ring and adapter. Comes with lot cover.

Fire collar HL 840 is designed for HL 310N series, it prevents the spread of high temperature, flame, smoke and toxic substances. This product consists of a metal holder with fire retardant intumescent material. Also it is equipped with built-in hangers and sound proofing collar. The product is equipped with socket joints for drains made of PVC and ABS. It is mounted to drains DN50/75. There is a plug. Limit of fire resistance is EI 45.

Download data sheet: Fire collar HL 840

Roof ventpipe fitting HL 807 have diameter of 75 mm. The roof ventpipe fitting is mounted to pipework of wastewater system that is output above the roof, so that leaves did not fall into the sewer.

The HL company produces taper HL 801R/M50-25 specially for models HL 801V/8-14 and HL 801V/11-18 which are used for optimal connection of pipes (d 8mm - d 14mm or d 11mm - d 18mm) and hydro insulation on the cellar wall. Thread is M50-25.

The HL company produces taper HL 801R/M63-32 specially for models HL 801V/17-25 and HL 801R/M32-25 which are used for optimal connection of pipes (d 17mm - d 25mm) and hydro insulation on the cellar wall. Thread is M63-32.

The HL company produces taper HL 801R/M40-32 specially for model HL 801V/17-25 which is used for optimal connection of pipes (d 17mm - d 25mm) and hydro insulation on the cellar wall. Thread is M40-32.

Screw joint HL 801V/28-38 is used in in combination with HL 801 (М50) for pushing through pipes or cables from d 28 mm to d 38 mm.

Screw joint HL 801V/40-52 is used in in combination with HL 801 (М63) for pushing through pipes or cables from d 40 mm to d 52 mm.

Screw joint HL 801V/8-14 is used in in combination with HL801 (М25) for pushing through pipes or cables from d 8 mm to d 14 mm.

Screw joint HL 801V/22-33 is used in in combination with HL 801 (М40) for pushing through pipes or cables from d 22 mm to d 33 mm.

Extension HL 8500H allows to increase height of the HL drains 3100T and 5100T series. It is equipped with bitumen flange. It is made of polypropylene. Height is 200 mm.

The  HL Company recommends using extension HL 85N for improving of the HL drains design. The extension has flange and O-ring. Its diameter is 110 mm, height is 103 mm. It is made of polypropylene.

Waterproofing kit HL 86.H has stainless steel clamping ring 280 x 200 mm, it is equipped with gasket and bitumen membrane d 500 mm. Comes with screws 6,3x22 mm.

Waterproofing kit HL 83.0 is made of stainless steel, it is equipped with clamping ring 200 x 115 mm and gasket. Comes with screws.

Blind plug HL 801B/M32 is used in combination with multiple pipe fairlead HL 801. Weight is 15 gr. For closure of wholes M32.

Fire collar HL 870 is designed for HL62 and HL317 series, it prevents the spread of high temperature, flame, smoke and toxic substances. This product consists of a metal holder with fire retardant intumescent material. Also it is equipped with built-in hangers and sound proofing collar. It is mounted to drains DN110. There is a plug. Limit of fire resistance is EI 90.

Download data sheet: Fire collar HL 870

The HL company produces taper HL 801R/M32-25 specially for models HL 801V/8-14 and HL 801V/11-18. Thread is M32-25.

Multiple pipe fairlead HL 801 has 4 holes for pipes. Diameters of inlets is 32, 40, 50 and 63 mm. Outlet is 160 mm. You can push through multiple pipe fairlead pipes with diameters from 8 to 52 mm. The multiple pipe fairlead is used in combination with HL800/160 sealing kit.

Download example of use: Multiple pipe fairlead HL 801

Socket connector HL 9/50/1 have diameter of 50/110 mm. It is made of polypropylene. The socket connector is used for connection PP or PVC non-pressure pipes and plastic sewage equipment to steel or cast-iron socketless pipes. The diameter of cast iron pipes is 110 mm and the diameter of PP or PVC pipes is 50 mm.

Sound-absorbing element HL 99 have high sound-absorbing characteristics. Size of the element is 250*250*30 mm. It is made of PE-Schaum.. It is mounted to drains with horizontal outlets

See examples of mounting the product: Sound-absorbing element HL 99

Socket connector HL 9/7 have diameter of 75 mm. It is made of polypropylene. The socket connector is used for connection PP or PVC non-pressure pipes and plastic sewage equipment to steel or cast-iron socketless pipes. It have resistance to high and low temperatures, and it can withstand  pressure up to 5 meters of water column.

Adapter HL 41.4 is used for connection non-pressure pipes to threaded pipes. Diameter of non-pressure pipe is 50 mm and diameter of threaded pipe is 1". It is made of polyethylene.

Extension HL 350.2 is designed for increasing length of the HL drains, roof outlets and extension HL 350.0. Height is 155 mm, and diameter is 145 mm.

Adapter HL 40.2 is used for connection non-pressure pipes to threaded pipes. Diameter of non-pressure pipe is 40 mm and diameter of threaded pipe is 1/2".

Adapter HL 30.3 is used for connection non-pressure pipes to threaded pipes. Diameter of non-pressure pipe is 32 mm and diameter of threaded pipe is 3/4".

Test plug HL 42R.MS have diameter of 1/2". It is made of brass and polypropylene, and it is painted in red colour.

Adapter HL 41.3 is used for connection non-pressure pipes to threaded pipes. Diameter of non-pressure pipe is 50 mm and diameter of threaded pipe is 3/4".

Drainage grating HL 635 is made of PUR/Alu, it has size of 362*362*100 mm. The drainage grating has aluminium grating 240 x 240 mm.

The HL company produces taper HL 801R/M50-32 specially for using in combination with HL801. For pipes d 17mm - d 25mm. Thread is M50-32.

The HL company produces taper HL 801R/M63-40 specially for using in combination with HL801. For pipes d 22mm - d 33mm. Thread is M63-40.

Sealing set HL 8300 is equipped with flange d 148x238 mm, gasket and EPDM-collar 500x500 mm. Comes with screws.

See examples of mounting the product: Sealing set HL 8300

Extension HL 65P is made of polypropylene, diameter of this extension is 125 mm. Extension is equipped with PVC collar. Extensions height is 345 mm. This device is designed for tightly connection a drain and waterproofing.

Download example of use: Extension HL 65P

Sealing set HL 8300.0 is equipped with flange d 148x238 mm and gasket. Comes with screws. It can be used with drains HL 3100 and HL 5100 series.

See examples of mounting the product: Sealing set HL 8300.0

Waterproofing kit HL 84.E is equipped with flange gasket 280x165 mm and zincplated steel sheet d 500 mm. The waterproofing kit is intended for the roof outlets series HL 62 and HL-64.

Elongation element HL 8500 allows to increase height of the HL drains. It is equipped with flange d 239 mm and O-ring. It is made of polypropylene. Height is 226 mm.

Socket connector HL 9/50 have diameter of 50 mm. It is made of polypropylene. The socket connector is used for connection PP or PVC non-pressure pipes to steel or cast-iron socketless pipes. It have resistance to high and low temperatures.

The HL Company produces grate HL 037N.31E for drains. It is made of stainless steel, and it have coat "light bronze". Size of grate is 115*115 mm.

Roof ventpipe fitting HL 810 is made of polypropylene. Diameter is 110 mm. It is mounted to pipeworks of sewer systems that are output above the roof, so leaves did not fall into the sewer.

Socket connector HL 9/1ET have diameter of 110 mm. It is made of polypropylene. The socket connector is used for push-fit connections between Eternit and plastic pipes.

Grate frame HL 071.5E is used with drains HL 71 and HL 71G series. It can extend drain of 100 mm.