Logo
Ru| En
Loading

Accessories for Geberit heating systems

The group of products includes различные комплектующие, требующиеся для монтажа отопительных систем:

  • Temperature control unit for distributor;
  • Valve unit for bypass;
  • Pipe bend brackets for Geberit ML and Geberit SL pipes;
  • Thermo-electric actuators;
  • Mounting supports;
  • Automatic air vent valves;
  • Digital thermostats;
  • Thermometers etc.
Photo Наименование Article Цена
Geberit bus cable for main controller [Code number: 651.433.00.1]
Details
651.433.00.1

Application purpose:

  • For connecting the Geberit master controller to the adjacent master controller

Characteristics:

  • Twisted cable 2 x 0.25 mm2

Power cable length: 0.6 m.

Geberit valve unit for bypass, nickel-plated, G 1" [Code number: 652.415.22.1]
Details
652.415.22.1

Application purpose:

  • For flow balancing when using uncontrolled circular pump

Characteristics:

  • Adjustable pressure 0.2-0.6 bar / 20-60 kPa;
  • Nickel-plated;
  • Copper tube;
  • Seal of EPDM.

Material: brass CW617N

DN G G1 H l SW
mm     cm cm mm
25 1" 1 1/4" 20 3,2 37
Geberit Thermo-electric actuator 24V UFH [Code number: 651.423.00.1]
Details
651.423.00.1

Application purpose:

  • To adjust the underfloor heating
  • For manifolds

Characteristics:

  • Status Indicator

Scope Of Delivery:

  • Adapter ring

Protection degree: II

Cable length: 1 m

M Nominal voltage / mains frequency Power consumption
mm    
30 x 1,5 24 V 1 W
Geberit Pipe bend bracket, d 16 [Code number: 651.828.00.1]
Details
651.828.00.1

Application purpose:

  • For fastening single-layer Geberit pipes

Size: DN 16

Geberit expansion joint, 9x2,4 cm [Code number: 651.824.00.1]
Details
651.824.00.1

Characteristics:

  • Isolation from polyurethane foam with closed cells

Accessories:

  • Protective tube for compensator
B H L
cm cm m
2,4 9 2
Geberit Terminal for distributing unit, with drain valve, nickel-plated, G 1" [Code number: 652.433.22.1]
Details
652.433.22.1

Application purpose:

  • For installing a quick release valve

Characteristics:

  • Thread 3/4 ", there is a cap
  • Nickel-plated
  • EPDM gasket

Material: Brass CW617N

G G1 L SW
    cm mm
1“ 1/2“ 7,4 37
Geberit Studded panel, s 10 mm [Code number: 651.822.00.1]
Details
651.822.00.1

Characteristics:

  • Can be used with Geberit pipes DN 16

Material: EPS

Thermal conductivity of insulation: 0.035 W/(m·K)

s s1 B L
mm mm cm cm
10 30 69 138
Geberit Pipe bend bracket, d 20 [Code number: 651.829.00.1]
Details
651.829.00.1

Application purpose:

  • For fastening single-layer Geberit pipes

Size: DN 20

Geberit Thermo-electric actuator with switch [Code number: 651.422.00.1]
Details
651.422.00.1

Application purpose:

  • To adjust the underfloor heating
  • For manifolds

Characteristics:

  • Status Indicator

Scope Of Delivery:

  • Adapter ring

Protection degree: II

Adjustable voltage: 0-10 V

Cable length: 1 m

M Nominal voltage / mains frequency Power consumption
mm    
30 x 1,5 230 V / 50–60 Hz 2 W
Geberit Automatic air vent valve, nickel-plated, G 1/2" NPW [Code number: 652.438.22.1]
Details
652.438.22.1

Application purpose:

  • For heating water

Characteristics:

  • Nickel-plated
  • Pressure no more than 6 bar
  • Stainless steel spring
  • EPDM gasket

Material: Brass CB753S

Maximum working pressure: 1000 kPa

Maximum water temperature: +110 °C

DN G H
    cm
15 1/2" 6,7
Geberit Digital thermostat for rooms [Code number: 652.401.00.1]
Details
652.401.00.1

Characteristics:

  • Power consumption 250 V

Scope Of Delivery:

  • Mounting plate
  • 2 alkaline battery AAA 1,5 V
  • Fixing material

Protection class: II

Operating voltage: 3 V

Geberit Studded panel, s 30 mm [Code number: 651.823.00.1]
Details
651.823.00.1

Characteristics:

  • Can be used with Geberit pipes DN 16

Material: EPS

Thermal conductivity of insulation: 0.035 W/(m·K)

s s1 B L
mm mm cm cm
30 50 69 138
Geberit Thermometer for angle-seat stop valve [Code number: 652.420.00.1]
Details
652.420.00.1

Application purpose:

  • For installation to a ball valve
  • For temperature control

Temperature range: 0–120 °C

Geberit End cap for distributing unit, nickel-plated, G 1" [Code number: 652.431.22.1]
Details
652.431.22.1

Characteristics:

  • Nickel-plated
  • EPDM gasket

Material: Brass CW617N

DN G
   
25 1“
Geberit Mounting support, d 16 / 20 [Code number: 651.761.00.1]
Details
651.761.00.1

Application purpose:

  • For fixing Geberit pipes on a smooth insulating panel 16 and 20 mm with a suitable stapler

Application purpose:

  • Black

Material: PA 6

Size: DN 16/20

Geberit Damper tape, 25 m [Code number: 651.810.00.1]
Details
651.810.00.1

Characteristics:

  • Isolation from polyurethane foam with closed cells

Material: Soft foam

B b H L
cm cm cm m
15,5 7,8 15,5 25
Geberit Thermo-electric actuator with switch 24V UFH [Code number: 651.424.00.1]
Details
651.424.00.1

Application purpose:

  • To adjust the underfloor heating
  • For manifolds

Characteristics:

  • Status Indicator

Scope Of Delivery:

  • Adapter ring

Protection degree: II

Adjustable voltage: 0-10 V

Cable length: 1 m

M Nominal voltage / mains frequency Power consumption
mm    
30 x 1,5 24 V 2 W
Geberit Thermo-electric actuator [Code number: 651.420.00.1]
Details
651.420.00.1

Application purpose:

  • To adjust the underfloor heating
  • For manifolds

Characteristics:

  • Status Indicator

Scope Of Delivery:

  • Adapter ring

Protection degree: II

Cable length: 1 m

M Nominal voltage / mains frequency Power consumption
mm    
30 x 1,5 230 V / 50–60 Hz 1 W
Geberit Volex flow divider with Eurocone, nickel-plated, G 3/4" [Code number: 652.436.22.1]
Details
652.436.22.1

Application purpose:

  • To increase the number of adapter fittings

Characteristics:

  • Nickel-plated

Material: Brass CW617N

DN G G1 L
      cm
15 3/4" 3/4" 3,6
Geberit Temperature control unit for distributor, nickel-plated, G 1" [Code number: 652.413.22.1]
Details
652.413.22.1

Application purpose:

  • For combined heating systems
  • For distributors 14 cm

Characteristics:

  • Nickel-plated;
  • Copper tube;
  • Seal of EPDM.

Material: brass CW617N

Temperature range: 0-80 °C

DN G G1 B B1 H H1 L SW
mm     cm cm cm cm cm mm
25 1" 1 1/2" 12,5 3,2 20 13,3 17,2 37
Geberit Antenna [Code number: 651.436.00.1]
Details
651.436.00.1

Application purposes:

  • For communication of the Geberit main controller with the Geberit indoor wireless thermostat
  • For subsequent installation

Scope of delivery:

  • Cable connection with plug

Technical data

Power cable length: 0.5 m

Radio frequency: 868 MHz

Geberit Dew point sensor [Code number: 651.439.00.1]
Details
651.439.00.1

Application purpose:

  • To determine the accumulation of condensate on surfaces

Dew point sensor dimensions are indicated in the draft.

Scope of delivery:

  • Easy installation
  • High strength
  • Attractive appearance
  • Operating pressure up to 16 bar
  • Operating temperature up to +80 °C
Geberit Insulation for distributors for underfloor heating [Code number: 652.531.00.1]
Details
652.531.00.1

Application purpose:

  • For thermal insulation of Geberit stainless steel collectors
  • For any construction length

Application purpose:

  • With heat and cold insulation
  • Reduces energy loss
  • Prevents condensation
  • With the possibility of shortening

Application purpose:

  • 4 fastening clips

Material: Soft polyfoam PE.

Scope of delivery:

  • Easy installation
  • High strength
  • Attractive appearance
  • Operating pressure up to 16 bar
  • Operating temperature up to +80 °C
Geberit Room thermostat RCD1 [Code number: 651.425.00.1]
Details
651.425.00.1
Geberit Room thermostat RCD1 [Code number: 651.426.00.1]
Details
651.426.00.1
Geberit Room thermostat RCD2 [Code number: 651.427.00.1]
Details
651.427.00.1
Geberit Temperature sensor for pipes [Code number: 651.438.00.1]
Details
651.438.00.1
Geberit Transformer [Code number: 651.440.00.1]
Details
651.440.00.1
Geberit Room thermostat RCD2 [Code number: 651.428.00.1]
Details
651.428.00.1
Geberit Main regulator [Code number: 651.432.00.1]
Details
651.432.00.1

Цель применения:

  • For controling the heating floor heating circuits
  • For adjusting max. 6 heating zones without time dependence
  • For mounting on DIN tires

Characteristics:

  • Up to 14 servos can be connected
  • Bus connection for system extensions
  • Closures or breakers for servo control
  • 2-point servo adjustment
  • LED status indicator
  • Outlet for external pump
  • Outlet for mixer servo
  • Inlet for heating / cooling switch
  • Inlet for ECO function
  • Inlet for outdoor temperature sensor
  • Inlet for inlet temperature
  • Inlet for dew point sensor
  • Suitable for wireless room thermostats
  • USB connection for software updates

Protection class: I

Degree of protection: IP20

Power consumption: max. 2100 watts

Standby power consumption: 0.5 W

Rated voltage / current frequency: 230 V / 50 Hz

Geberit Outside temperature sensor [Code number: 651.437.00.1]
Details
651.437.00.1

See also