Logo
Ru| En

Unix-8200 sleeves with flange

Home→ Catalog→ Unitek→ Unix sealing systems→ Unix-8200

Unix-8200 sleeves with flange are used for entering pipelines and cables through existing walls and foundations in constructed buildings during reconstruction. The special design of the sleeve is designed for fasteners on the outside or the foundation, so that you can safely enter communications for any purpose into the building.

Sleeves are used in buildings without a waterproofing layer or without an additional waterproofing diaphragm. Ideal for use with Unix-RS and Unix-RM seals.

Main advantages:

  • corrosion resistance;
  • reliability;
  • durability;
  • resistance to aggressive environments;
  • wide range of sizes;
  • various uses.
Photo Name Article Price
Photo Draft
Photo Sleeve Unix-8200 with flange for ounting in constructed buildings, length 100 mm, DN 100х1,5 (price on request) [Code number: SFSS8200-100/100] Draft Sleeve Unix-8200 with flange for ounting in constructed buildings, length 100 mm, DN 100х1,5 (price on request) [Code number: SFSS8200-100/100]
Sleeve Unix-8200 with flange for ounting in constructed buildings, length 100 mm, DN 100х1,5 (price on request) [Code number: SFSS8200-100/100]
Details 		SFSS8200-100/100

Application purposes:

  • For sealing the cable and pipeline entries through walls and foundations in constructed buildings during renovations
  • For pressure and non-pressure water

Material:

  • AISI 304 stainless steel
  • EPDM - rubber gasket

Characteristics:

  • Gas tightness
  • Simplicity and reliability of installation
  • Durability
  • Corrosion resistance
  • Perhaps combined with seals Unix-RS and Unix-RM

      • The final price may vary depending on the volume and composition of the order. Request an invoice.

    Sleeve size Length Inner diameter Pipe / Cable Diameter Inner sleeve diameter Outer flange size Standard sleeve length Unix-RS single seal
    mm mm mm mm mm mm mm mm
    102х1,5 100 99 60 100 190 80 RS 100

    Download product installation instruction: Sleeve Unix-8200 Sleeve Unix-8200
Photo Draft
Photo Sleeve Unix-8200 with flange for ounting in constructed buildings, length 200 mm, DN 100х1,5 (price on request) [Code number: SFSS8200-100/200] Draft Sleeve Unix-8200 with flange for ounting in constructed buildings, length 200 mm, DN 100х1,5 (price on request) [Code number: SFSS8200-100/200]
Sleeve Unix-8200 with flange for ounting in constructed buildings, length 200 mm, DN 100х1,5 (price on request) [Code number: SFSS8200-100/200]
Details 		SFSS8200-100/200

Application purposes:

  • For sealing the cable and pipeline entries through walls and foundations in constructed buildings during renovations
  • For pressure and non-pressure water

Material:

  • AISI 304 stainless steel
  • EPDM - rubber gasket

Characteristics:

  • Gas tightness
  • Simplicity and reliability of installation
  • Durability
  • Corrosion resistance
  • Perhaps combined with seals Unix-RS and Unix-RM

      • The final price may vary depending on the volume and composition of the order. Request an invoice.

    Sleeve size Length Inner diameter Pipe / Cable Diameter Inner sleeve diameter Outer flange size Standard sleeve length Unix-RS single seal
    mm mm mm mm mm mm mm mm
    102х1,5 200 99 60 100 190 80 RS 100

    Download product installation instruction: Sleeve Unix-8200 Sleeve Unix-8200
Photo Draft
Photo Sleeve Unix-8200 with flange for ounting in constructed buildings, length 300 mm, DN 100х1,5 (price on request) [Code number: SFSS8200-100/300] Draft Sleeve Unix-8200 with flange for ounting in constructed buildings, length 300 mm, DN 100х1,5 (price on request) [Code number: SFSS8200-100/300]
Sleeve Unix-8200 with flange for ounting in constructed buildings, length 300 mm, DN 100х1,5 (price on request) [Code number: SFSS8200-100/300]
Details 		SFSS8200-100/300

Application purposes:

  • For sealing the cable and pipeline entries through walls and foundations in constructed buildings during renovations
  • For pressure and non-pressure water

Material:

  • AISI 304 stainless steel
  • EPDM - rubber gasket

Characteristics:

  • Gas tightness
  • Simplicity and reliability of installation
  • Durability
  • Corrosion resistance
  • Perhaps combined with seals Unix-RS and Unix-RM

      • The final price may vary depending on the volume and composition of the order. Request an invoice.

    Sleeve size Length Inner diameter Pipe / Cable Diameter Inner sleeve diameter Outer flange size Standard sleeve length Unix-RS single seal
    mm mm mm mm mm mm mm mm
    102х1,5 300 99 60 100 190 80 RS 100

    Download product installation instruction: Sleeve Unix-8200 Sleeve Unix-8200
Photo Draft
Photo Sleeve Unix-8200 with flange for ounting in constructed buildings, length 400 mm, DN 100х1,5 (price on request) [Code number: SFSS8200-100/400] Draft Sleeve Unix-8200 with flange for ounting in constructed buildings, length 400 mm, DN 100х1,5 (price on request) [Code number: SFSS8200-100/400]
Sleeve Unix-8200 with flange for ounting in constructed buildings, length 400 mm, DN 100х1,5 (price on request) [Code number: SFSS8200-100/400]
Details 		SFSS8200-100/400

Application purposes:

  • For sealing the cable and pipeline entries through walls and foundations in constructed buildings during renovations
  • For pressure and non-pressure water

Material:

  • AISI 304 stainless steel
  • EPDM - rubber gasket

Characteristics:

  • Gas tightness
  • Simplicity and reliability of installation
  • Durability
  • Corrosion resistance
  • Perhaps combined with seals Unix-RS and Unix-RM

      • The final price may vary depending on the volume and composition of the order. Request an invoice.

    Sleeve size Length Inner diameter Pipe / Cable Diameter Inner sleeve diameter Outer flange size Standard sleeve length Unix-RS single seal
    mm mm mm mm mm mm mm mm
    102х1,5 400 99 60 100 190 80 RS 100

    Download product installation instruction: Sleeve Unix-8200 Sleeve Unix-8200
Photo Draft
Photo Sleeve Unix-8200 with flange for ounting in constructed buildings, length 500 mm, DN 100х1,5 (price on request) [Code number: SFSS8200-100/500] Draft Sleeve Unix-8200 with flange for ounting in constructed buildings, length 500 mm, DN 100х1,5 (price on request) [Code number: SFSS8200-100/500]
Sleeve Unix-8200 with flange for ounting in constructed buildings, length 500 mm, DN 100х1,5 (price on request) [Code number: SFSS8200-100/500]
Details 		SFSS8200-100/500

Application purposes:

  • For sealing the cable and pipeline entries through walls and foundations in constructed buildings during renovations
  • For pressure and non-pressure water

Material:

  • AISI 304 stainless steel
  • EPDM - rubber gasket

Characteristics:

  • Gas tightness
  • Simplicity and reliability of installation
  • Durability
  • Corrosion resistance
  • Perhaps combined with seals Unix-RS and Unix-RM

      • The final price may vary depending on the volume and composition of the order. Request an invoice.

    Sleeve size Length Inner diameter Pipe / Cable Diameter Inner sleeve diameter Outer flange size Standard sleeve length Unix-RS single seal
    mm mm mm mm mm mm mm mm
    102х1,5 500 99 60 100 190 80 RS 100

    Download product installation instruction: Sleeve Unix-8200 Sleeve Unix-8200
Photo Draft
Photo Sleeve Unix-8200 with flange for ounting in constructed buildings, length 100 mm, DN 125х2,0 (price on request) [Code number: SFSS8200-125/100] Draft Sleeve Unix-8200 with flange for ounting in constructed buildings, length 100 mm, DN 125х2,0 (price on request) [Code number: SFSS8200-125/100]
Sleeve Unix-8200 with flange for ounting in constructed buildings, length 100 mm, DN 125х2,0 (price on request) [Code number: SFSS8200-125/100]
Details 		SFSS8200-125/100

Application purposes:

  • For sealing the cable and pipeline entries through walls and foundations in constructed buildings during renovations
  • For pressure and non-pressure water

Material:

  • AISI 304 stainless steel
  • EPDM - rubber gasket

Characteristics:

  • Gas tightness
  • Simplicity and reliability of installation
  • Durability
  • Corrosion resistance
  • Perhaps combined with seals Unix-RS and Unix-RM

      • The final price may vary depending on the volume and composition of the order. Request an invoice.

    Sleeve size Length Inner diameter Pipe / Cable Diameter Inner sleeve diameter Outer flange size Standard sleeve length Unix-RS single seal
    mm mm mm mm mm mm mm mm
    129х2,0 100 125 89 125 210 80 RS 125

    Download product installation instruction: Sleeve Unix-8200 Sleeve Unix-8200
Photo Draft
Photo Sleeve Unix-8200 with flange for ounting in constructed buildings, length 200 mm, DN 125х2,0 (price on request) [Code number: SFSS8200-125/200] Draft Sleeve Unix-8200 with flange for ounting in constructed buildings, length 200 mm, DN 125х2,0 (price on request) [Code number: SFSS8200-125/200]
Sleeve Unix-8200 with flange for ounting in constructed buildings, length 200 mm, DN 125х2,0 (price on request) [Code number: SFSS8200-125/200]
Details 		SFSS8200-125/200

Application purposes:

  • For sealing the cable and pipeline entries through walls and foundations in constructed buildings during renovations
  • For pressure and non-pressure water

Material:

  • AISI 304 stainless steel
  • EPDM - rubber gasket

Characteristics:

  • Gas tightness
  • Simplicity and reliability of installation
  • Durability
  • Corrosion resistance
  • Perhaps combined with seals Unix-RS and Unix-RM

      • The final price may vary depending on the volume and composition of the order. Request an invoice.

    Sleeve size Length Inner diameter Pipe / Cable Diameter Inner sleeve diameter Outer flange size Standard sleeve length Unix-RS single seal
    mm mm mm mm mm mm mm mm
    129х2,0 200 125 89 125 210 80 RS 125

    Download product installation instruction: Sleeve Unix-8200 Sleeve Unix-8200
Photo Draft
Photo Sleeve Unix-8200 with flange for ounting in constructed buildings, length 300 mm, DN 125х2,0 (price on request) [Code number: SFSS8200-125/300] Draft Sleeve Unix-8200 with flange for ounting in constructed buildings, length 300 mm, DN 125х2,0 (price on request) [Code number: SFSS8200-125/300]
Sleeve Unix-8200 with flange for ounting in constructed buildings, length 300 mm, DN 125х2,0 (price on request) [Code number: SFSS8200-125/300]
Details 		SFSS8200-125/300

Application purposes:

  • For sealing the cable and pipeline entries through walls and foundations in constructed buildings during renovations
  • For pressure and non-pressure water

Material:

  • AISI 304 stainless steel
  • EPDM - rubber gasket

Characteristics:

  • Gas tightness
  • Simplicity and reliability of installation
  • Durability
  • Corrosion resistance
  • Perhaps combined with seals Unix-RS and Unix-RM

      • The final price may vary depending on the volume and composition of the order. Request an invoice.

    Sleeve size Length Inner diameter Pipe / Cable Diameter Inner sleeve diameter Outer flange size Standard sleeve length Unix-RS single seal
    mm mm mm mm mm mm mm mm
    129х2,0 300 125 89 125 210 80 RS 125

    Download product installation instruction: Sleeve Unix-8200 Sleeve Unix-8200
Photo Draft
Photo Sleeve Unix-8200 with flange for ounting in constructed buildings, length 400 mm, DN 125х2,0 (price on request) [Code number: SFSS8200-125/400] Draft Sleeve Unix-8200 with flange for ounting in constructed buildings, length 400 mm, DN 125х2,0 (price on request) [Code number: SFSS8200-125/400]
Sleeve Unix-8200 with flange for ounting in constructed buildings, length 400 mm, DN 125х2,0 (price on request) [Code number: SFSS8200-125/400]
Details 		SFSS8200-125/400

Application purposes:

  • For sealing the cable and pipeline entries through walls and foundations in constructed buildings during renovations
  • For pressure and non-pressure water

Material:

  • AISI 304 stainless steel
  • EPDM - rubber gasket

Characteristics:

  • Gas tightness
  • Simplicity and reliability of installation
  • Durability
  • Corrosion resistance
  • Perhaps combined with seals Unix-RS and Unix-RM

      • The final price may vary depending on the volume and composition of the order. Request an invoice.

    Sleeve size Length Inner diameter Pipe / Cable Diameter Inner sleeve diameter Outer flange size Standard sleeve length Unix-RS single seal
    mm mm mm mm mm mm mm mm
    129х2,0 400 125 89 125 210 80 RS 125

    Download product installation instruction: Sleeve Unix-8200 Sleeve Unix-8200
Photo Draft
Photo Sleeve Unix-8200 with flange for ounting in constructed buildings, length 500 mm, DN 125х2,0 (price on request) [Code number: SFSS8200-125/500] Draft Sleeve Unix-8200 with flange for ounting in constructed buildings, length 500 mm, DN 125х2,0 (price on request) [Code number: SFSS8200-125/500]
Sleeve Unix-8200 with flange for ounting in constructed buildings, length 500 mm, DN 125х2,0 (price on request) [Code number: SFSS8200-125/500]
Details 		SFSS8200-125/500

Application purposes:

  • For sealing the cable and pipeline entries through walls and foundations in constructed buildings during renovations
  • For pressure and non-pressure water

Material:

  • AISI 304 stainless steel
  • EPDM - rubber gasket

Characteristics:

  • Gas tightness
  • Simplicity and reliability of installation
  • Durability
  • Corrosion resistance
  • Perhaps combined with seals Unix-RS and Unix-RM

      • The final price may vary depending on the volume and composition of the order. Request an invoice.

    Sleeve size Length Inner diameter Pipe / Cable Diameter Inner sleeve diameter Outer flange size Standard sleeve length Unix-RS single seal
    mm mm mm mm mm mm mm mm
    129х2,0 500 125 89 125 210 80 RS 125

    Download product installation instruction: Sleeve Unix-8200 Sleeve Unix-8200
Photo Draft
Photo Sleeve Unix-8200 with flange for ounting in constructed buildings, length 100 mm, DN 150х2,0 (price on request) [Code number: SFSS8200-150/100] Draft Sleeve Unix-8200 with flange for ounting in constructed buildings, length 100 mm, DN 150х2,0 (price on request) [Code number: SFSS8200-150/100]
Sleeve Unix-8200 with flange for ounting in constructed buildings, length 100 mm, DN 150х2,0 (price on request) [Code number: SFSS8200-150/100]
Details 		SFSS8200-150/100

Application purposes:

  • For sealing the cable and pipeline entries through walls and foundations in constructed buildings during renovations
  • For pressure and non-pressure water

Material:

  • AISI 304 stainless steel
  • EPDM - rubber gasket

Characteristics:

  • Gas tightness
  • Simplicity and reliability of installation
  • Durability
  • Corrosion resistance
  • Perhaps combined with seals Unix-RS and Unix-RM

      • The final price may vary depending on the volume and composition of the order. Request an invoice.

    Sleeve size Length Inner diameter Pipe / Cable Diameter Inner sleeve diameter Outer flange size Standard sleeve length Unix-RS single seal
    mm mm mm mm mm mm mm mm
    154х2,0 100 150 110 150 240 80 RS 150

    Download product installation instruction: Sleeve Unix-8200 Sleeve Unix-8200
Photo Draft
Photo Sleeve Unix-8200 with flange for ounting in constructed buildings, length 200 mm, DN 150х2,0 (price on request) [Code number: SFSS8200-150/200] Draft Sleeve Unix-8200 with flange for ounting in constructed buildings, length 200 mm, DN 150х2,0 (price on request) [Code number: SFSS8200-150/200]
Sleeve Unix-8200 with flange for ounting in constructed buildings, length 200 mm, DN 150х2,0 (price on request) [Code number: SFSS8200-150/200]
Details 		SFSS8200-150/200

Application purposes:

  • For sealing the cable and pipeline entries through walls and foundations in constructed buildings during renovations
  • For pressure and non-pressure water

Material:

  • AISI 304 stainless steel
  • EPDM - rubber gasket

Characteristics:

  • Gas tightness
  • Simplicity and reliability of installation
  • Durability
  • Corrosion resistance
  • Perhaps combined with seals Unix-RS and Unix-RM

      • The final price may vary depending on the volume and composition of the order. Request an invoice.

    Sleeve size Length Inner diameter Pipe / Cable Diameter Inner sleeve diameter Outer flange size Standard sleeve length Unix-RS single seal
    mm mm mm mm mm mm mm mm
    154х2,0 200 150 110 150 240 80 RS 150

    Download product installation instruction: Sleeve Unix-8200 Sleeve Unix-8200
Photo Draft
Photo Sleeve Unix-8200 with flange for ounting in constructed buildings, length 300 mm, DN 150х2,0 (price on request) [Code number: SFSS8200-150/300] Draft Sleeve Unix-8200 with flange for ounting in constructed buildings, length 300 mm, DN 150х2,0 (price on request) [Code number: SFSS8200-150/300]
Sleeve Unix-8200 with flange for ounting in constructed buildings, length 300 mm, DN 150х2,0 (price on request) [Code number: SFSS8200-150/300]
Details 		SFSS8200-150/300

Application purposes:

  • For sealing the cable and pipeline entries through walls and foundations in constructed buildings during renovations
  • For pressure and non-pressure water

Material:

  • AISI 304 stainless steel
  • EPDM - rubber gasket

Characteristics:

  • Gas tightness
  • Simplicity and reliability of installation
  • Durability
  • Corrosion resistance
  • Perhaps combined with seals Unix-RS and Unix-RM

      • The final price may vary depending on the volume and composition of the order. Request an invoice.

    Sleeve size Length Inner diameter Pipe / Cable Diameter Inner sleeve diameter Outer flange size Standard sleeve length Unix-RS single seal
    mm mm mm mm mm mm mm mm
    154х2,0 300 150 110 150 240 80 RS 150

    Download product installation instruction: Sleeve Unix-8200 Sleeve Unix-8200
Photo Draft
Photo Sleeve Unix-8200 with flange for ounting in constructed buildings, length 400 mm, DN 150х2,0 (price on request) [Code number: SFSS8200-150/400] Draft Sleeve Unix-8200 with flange for ounting in constructed buildings, length 400 mm, DN 150х2,0 (price on request) [Code number: SFSS8200-150/400]
Sleeve Unix-8200 with flange for ounting in constructed buildings, length 400 mm, DN 150х2,0 (price on request) [Code number: SFSS8200-150/400]
Details 		SFSS8200-150/400

Application purposes:

  • For sealing the cable and pipeline entries through walls and foundations in constructed buildings during renovations
  • For pressure and non-pressure water

Material:

  • AISI 304 stainless steel
  • EPDM - rubber gasket

Characteristics:

  • Gas tightness
  • Simplicity and reliability of installation
  • Durability
  • Corrosion resistance
  • Perhaps combined with seals Unix-RS and Unix-RM

      • The final price may vary depending on the volume and composition of the order. Request an invoice.

    Sleeve size Length Inner diameter Pipe / Cable Diameter Inner sleeve diameter Outer flange size Standard sleeve length Unix-RS single seal
    mm mm mm mm mm mm mm mm
    154х2,0 400 150 110 150 240 80 RS 150

    Download product installation instruction: Sleeve Unix-8200 Sleeve Unix-8200
Photo Draft
Photo Sleeve Unix-8200 with flange for ounting in constructed buildings, length 500 mm, DN 150х2,0 (price on request) [Code number: SFSS8200-150/500] Draft Sleeve Unix-8200 with flange for ounting in constructed buildings, length 500 mm, DN 150х2,0 (price on request) [Code number: SFSS8200-150/500]
Sleeve Unix-8200 with flange for ounting in constructed buildings, length 500 mm, DN 150х2,0 (price on request) [Code number: SFSS8200-150/500]
Details 		SFSS8200-150/500

Application purposes:

  • For sealing the cable and pipeline entries through walls and foundations in constructed buildings during renovations
  • For pressure and non-pressure water

Material:

  • AISI 304 stainless steel
  • EPDM - rubber gasket

Characteristics:

  • Gas tightness
  • Simplicity and reliability of installation
  • Durability
  • Corrosion resistance
  • Perhaps combined with seals Unix-RS and Unix-RM

      • The final price may vary depending on the volume and composition of the order. Request an invoice.

    Sleeve size Length Inner diameter Pipe / Cable Diameter Inner sleeve diameter Outer flange size Standard sleeve length Unix-RS single seal
    mm mm mm mm mm mm mm mm
    154х2,0 500 150 110 150 240 80 RS 150

    Download product installation instruction: Sleeve Unix-8200 Sleeve Unix-8200
Photo Draft
Photo Sleeve Unix-8200 with flange for ounting in constructed buildings, length 100 mm, DN 200х2,0 (price on request) [Code number: SFSS8200-200/100] Draft Sleeve Unix-8200 with flange for ounting in constructed buildings, length 100 mm, DN 200х2,0 (price on request) [Code number: SFSS8200-200/100]
Sleeve Unix-8200 with flange for ounting in constructed buildings, length 100 mm, DN 200х2,0 (price on request) [Code number: SFSS8200-200/100]
Details 		SFSS8200-200/100

Application purposes:

  • For sealing the cable and pipeline entries through walls and foundations in constructed buildings during renovations
  • For pressure and non-pressure water

Material:

  • AISI 304 stainless steel
  • EPDM - rubber gasket

Characteristics:

  • Gas tightness
  • Simplicity and reliability of installation
  • Durability
  • Corrosion resistance
  • Perhaps combined with seals Unix-RS and Unix-RM

      • The final price may vary depending on the volume and composition of the order. Request an invoice.

    Sleeve size Length Inner diameter Pipe / Cable Diameter Inner sleeve diameter Outer flange size Standard sleeve length Unix-RS single seal
    mm mm mm mm mm mm mm mm
    204х2,0 100 200 159 205 300 80 RS 200

    Download product installation instruction: Sleeve Unix-8200 Sleeve Unix-8200
Photo Draft
Photo Sleeve Unix-8200 with flange for ounting in constructed buildings, length 200 mm, DN 200х2,0 (price on request) [Code number: SFSS8200-200/200] Draft Sleeve Unix-8200 with flange for ounting in constructed buildings, length 200 mm, DN 200х2,0 (price on request) [Code number: SFSS8200-200/200]
Sleeve Unix-8200 with flange for ounting in constructed buildings, length 200 mm, DN 200х2,0 (price on request) [Code number: SFSS8200-200/200]
Details 		SFSS8200-200/200

Application purposes:

  • For sealing the cable and pipeline entries through walls and foundations in constructed buildings during renovations
  • For pressure and non-pressure water

Material:

  • AISI 304 stainless steel
  • EPDM - rubber gasket

Characteristics:

  • Gas tightness
  • Simplicity and reliability of installation
  • Durability
  • Corrosion resistance
  • Perhaps combined with seals Unix-RS and Unix-RM

      • The final price may vary depending on the volume and composition of the order. Request an invoice.

    Sleeve size Length Inner diameter Pipe / Cable Diameter Inner sleeve diameter Outer flange size Standard sleeve length Unix-RS single seal
    mm mm mm mm mm mm mm mm
    204х2,0 200 200 159 205 300 80 RS 200

    Download product installation instruction: Sleeve Unix-8200 Sleeve Unix-8200
Photo Draft
Photo Sleeve Unix-8200 with flange for ounting in constructed buildings, length 300 mm, DN 200х2,0 (price on request) [Code number: SFSS8200-200/300] Draft Sleeve Unix-8200 with flange for ounting in constructed buildings, length 300 mm, DN 200х2,0 (price on request) [Code number: SFSS8200-200/300]
Sleeve Unix-8200 with flange for ounting in constructed buildings, length 300 mm, DN 200х2,0 (price on request) [Code number: SFSS8200-200/300]
Details 		SFSS8200-200/300

Application purposes:

  • For sealing the cable and pipeline entries through walls and foundations in constructed buildings during renovations
  • For pressure and non-pressure water

Material:

  • AISI 304 stainless steel
  • EPDM - rubber gasket

Characteristics:

  • Gas tightness
  • Simplicity and reliability of installation
  • Durability
  • Corrosion resistance
  • Perhaps combined with seals Unix-RS and Unix-RM

      • The final price may vary depending on the volume and composition of the order. Request an invoice.

    Sleeve size Length Inner diameter Pipe / Cable Diameter Inner sleeve diameter Outer flange size Standard sleeve length Unix-RS single seal
    mm mm mm mm mm mm mm mm
    204х2,0 300 200 159 205 300 80 RS 200

    Download product installation instruction: Sleeve Unix-8200 Sleeve Unix-8200
Photo Draft
Photo Sleeve Unix-8200 with flange for ounting in constructed buildings, length 400 mm, DN 200х2,0 (price on request) [Code number: SFSS8200-200/400] Draft Sleeve Unix-8200 with flange for ounting in constructed buildings, length 400 mm, DN 200х2,0 (price on request) [Code number: SFSS8200-200/400]
Sleeve Unix-8200 with flange for ounting in constructed buildings, length 400 mm, DN 200х2,0 (price on request) [Code number: SFSS8200-200/400]
Details 		SFSS8200-200/400

Application purposes:

  • For sealing the cable and pipeline entries through walls and foundations in constructed buildings during renovations
  • For pressure and non-pressure water

Material:

  • AISI 304 stainless steel
  • EPDM - rubber gasket

Characteristics:

  • Gas tightness
  • Simplicity and reliability of installation
  • Durability
  • Corrosion resistance
  • Perhaps combined with seals Unix-RS and Unix-RM

      • The final price may vary depending on the volume and composition of the order. Request an invoice.

    Sleeve size Length Inner diameter Pipe / Cable Diameter Inner sleeve diameter Outer flange size Standard sleeve length Unix-RS single seal
    mm mm mm mm mm mm mm mm
    204х2,0 400 200 159 205 300 80 RS 200

    Download product installation instruction: Sleeve Unix-8200 Sleeve Unix-8200
Photo Draft
Photo Sleeve Unix-8200 with flange for ounting in constructed buildings, length 500 mm, DN 200х2,0 (price on request) [Code number: SFSS8200-200/500] Draft Sleeve Unix-8200 with flange for ounting in constructed buildings, length 500 mm, DN 200х2,0 (price on request) [Code number: SFSS8200-200/500]
Sleeve Unix-8200 with flange for ounting in constructed buildings, length 500 mm, DN 200х2,0 (price on request) [Code number: SFSS8200-200/500]
Details 		SFSS8200-200/500

Application purposes:

  • For sealing the cable and pipeline entries through walls and foundations in constructed buildings during renovations
  • For pressure and non-pressure water

Material:

  • AISI 304 stainless steel
  • EPDM - rubber gasket

Characteristics:

  • Gas tightness
  • Simplicity and reliability of installation
  • Durability
  • Corrosion resistance
  • Perhaps combined with seals Unix-RS and Unix-RM

      • The final price may vary depending on the volume and composition of the order. Request an invoice.

    Sleeve size Length Inner diameter Pipe / Cable Diameter Inner sleeve diameter Outer flange size Standard sleeve length Unix-RS single seal
    mm mm mm mm mm mm mm mm
    204х2,0 500 200 159 205 300 80 RS 200

    Download product installation instruction: Sleeve Unix-8200 Sleeve Unix-8200

See also

%d0%a1%d0%be%d0%b5%d0%b4%d0%b8%d0%bd%d0%b8%d1%82%d0%b5%d0%bb%d1%8c%d0%bd%d1%8b%d0%b5 %d0%a5%d0%be%d0%bc%d1%83%d1%82%d1%8b
Connecting elements
%d0%a3%d1%81%d0%b8%d0%bb%d0%b8%d0%b2%d0%b0%d1%8e%d1%89%d0%b8%d0%b5 %d0%a5%d0%be%d0%bc%d1%83%d1%82%d1%8b
Strengthen connecting elements
%d0%9f%d0%b5%d1%80%d0%b5%d1%85%d0%be%d0%b4%d1%8b %d0%bd%d0%b0 %d0%bf%d0%bb%d0%b0%d1%81%d1%82%d0%b8%d0%ba
PP-adapter Konfix etc.

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited