Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Viking Johnson MaxiFit couplings

Home→ Catalog→ Viking Johnson→ MaxiFit→ Couplings

Viking Johnson MaxiFit couplings are designed for connecting pipes with smooth ends (connecting pipes), which have different diameters. They are suitable for various materials, in particular steel, asbestos cement, gray and ductile iron, fiberglass, PVC etc.

Couplings are designed and manufactured under the control of quality management systems in accordance with BS EN ISO 9001. They fully comply with quality standards GOST 12.2.003-91, GOST 356-80, GOST 12815-80, GOST 12821-80, GOST 15763-91.

Main advantages:

  • unique sealing cuff with special ring ribs for easy sliding installation and reliable sealing;
  • resistance to corrosion and damage;
  • universal reaming;
  • pipes may be deflected at an angle of 3° on each side;
  • simple installation;
  • estimated life of 50 years.
Photo Наименование Article Цена
Photo Draft
Photo Viking Johnson MaxiFit Coupling for ductile iron, steel and PVC pipes, d 689-706 mm [Code number: MF689] Draft Viking Johnson MaxiFit Coupling for ductile iron, steel and PVC pipes, d 689-706 mm [Code number: MF689]
Viking Johnson MaxiFit Coupling for ductile iron, steel and PVC pipes, d 689-706 mm [Code number: MF689]
Details 		MF689

Application purpose:

  • For connection pipes made of cast iron, steel, PVC, as well as some other materials (pipes made of PE are mounted using a sleeve) in various combinations
  • For neutral liquids at permissible operating temperature + 50 °С

Characteristics:

  • Working pressure up to 16 bar (water) and up to 6 bar (gas)
  • One type of pipe coupling made of different materials
  • The design provides easy and quick installation
  • The gap between the ends of the pipes is necessary to: compensate for thermal expansion, prevent transmission of vibration, compensate for sedimentation and facilitate installation/dismantling

Installation:

  • Pipes are inserted into a freely assembled freely assembled coupling, with a gap between the ends of the pipes of about 20 mm (chamfering not required)
  • Pressure ring bolts tighten all the way

Materials:

  • Pressure ring and adapter housing / Center pipe: Rolled steel according to British standard BS EN 10025-2: 2004 Grade S275
  • Bolts: Steel according to BS EN ISO 898-1: 2009. Material category 4.8
  • Nuts: Steel according to British standard BS EN 4190: 2001 Grade 4
  • Washers: Stainless steel in accordance with BS 1449: Part 2: 1983. Grade 304 S15
  • Sealing collar: EPDM
Outer diameter Full diameter (A) Bolts. Quantity diam. x length Weight
         
mm mm mm mm kg
689.0 706.0 816.0 14-M12 x 340 56.3
Photo Draft
Photo Viking Johnson MaxiFit Coupling for ductile iron, steel and PVC pipes, d 695-712 mm [Code number: MF695] Draft Viking Johnson MaxiFit Coupling for ductile iron, steel and PVC pipes, d 695-712 mm [Code number: MF695]
Viking Johnson MaxiFit Coupling for ductile iron, steel and PVC pipes, d 695-712 mm [Code number: MF695]
Details 		MF695

Application purpose:

  • For connection pipes made of cast iron, steel, PVC, as well as some other materials (pipes made of PE are mounted using a sleeve) in various combinations
  • For neutral liquids at permissible operating temperature + 50 °С

Characteristics:

  • Working pressure up to 16 bar (water) and up to 6 bar (gas)
  • One type of pipe coupling made of different materials
  • The design provides easy and quick installation
  • The gap between the ends of the pipes is necessary to: compensate for thermal expansion, prevent transmission of vibration, compensate for sedimentation and facilitate installation/dismantling

Installation:

  • Pipes are inserted into a freely assembled freely assembled coupling, with a gap between the ends of the pipes of about 20 mm (chamfering not required)
  • Pressure ring bolts tighten all the way

Materials:

  • Pressure ring and adapter housing / Center pipe: Rolled steel according to British standard BS EN 10025-2: 2004 Grade S275
  • Bolts: Steel according to BS EN ISO 898-1: 2009. Material category 4.8
  • Nuts: Steel according to British standard BS EN 4190: 2001 Grade 4
  • Washers: Stainless steel in accordance with BS 1449: Part 2: 1983. Grade 304 S15
  • Sealing collar: EPDM
Outer diameter Full diameter (A) Bolts. Quantity diam. x length Weight
         
mm mm mm mm kg
695.0 712.0 822.0 14-M12 x 340 56.7
Photo Draft
Photo Viking Johnson MaxiFit Coupling for ductile iron, steel and PVC pipes, d 707-724 mm [Code number: MF707] Draft Viking Johnson MaxiFit Coupling for ductile iron, steel and PVC pipes, d 707-724 mm [Code number: MF707]
Viking Johnson MaxiFit Coupling for ductile iron, steel and PVC pipes, d 707-724 mm [Code number: MF707]
Details 		MF707

Application purpose:

  • For connection pipes made of cast iron, steel, PVC, as well as some other materials (pipes made of PE are mounted using a sleeve) in various combinations
  • For neutral liquids at permissible operating temperature + 50 °С

Characteristics:

  • Working pressure up to 16 bar (water) and up to 6 bar (gas)
  • One type of pipe coupling made of different materials
  • The design provides easy and quick installation
  • The gap between the ends of the pipes is necessary to: compensate for thermal expansion, prevent transmission of vibration, compensate for sedimentation and facilitate installation/dismantling

Installation:

  • Pipes are inserted into a freely assembled freely assembled coupling, with a gap between the ends of the pipes of about 20 mm (chamfering not required)
  • Pressure ring bolts tighten all the way

Materials:

  • Pressure ring and adapter housing / Center pipe: Rolled steel according to British standard BS EN 10025-2: 2004 Grade S275
  • Bolts: Steel according to BS EN ISO 898-1: 2009. Material category 4.8
  • Nuts: Steel according to British standard BS EN 4190: 2001 Grade 4
  • Washers: Stainless steel in accordance with BS 1449: Part 2: 1983. Grade 304 S15
  • Sealing collar: EPDM
Size: 707-724 mm
Photo Draft
Photo Viking Johnson MaxiFit Coupling for ductile iron, steel and PVC pipes, d 733-750 mm [Code number: MF733] Draft Viking Johnson MaxiFit Coupling for ductile iron, steel and PVC pipes, d 733-750 mm [Code number: MF733]
Viking Johnson MaxiFit Coupling for ductile iron, steel and PVC pipes, d 733-750 mm [Code number: MF733]
Details 		MF733

Application purpose:

  • For connection pipes made of cast iron, steel, PVC, as well as some other materials (pipes made of PE are mounted using a sleeve) in various combinations
  • For neutral liquids at permissible operating temperature + 50 °С

Characteristics:

  • Working pressure up to 16 bar (water) and up to 6 bar (gas)
  • One type of pipe coupling made of different materials
  • The design provides easy and quick installation
  • The gap between the ends of the pipes is necessary to: compensate for thermal expansion, prevent transmission of vibration, compensate for sedimentation and facilitate installation/dismantling

Installation:

  • Pipes are inserted into a freely assembled freely assembled coupling, with a gap between the ends of the pipes of about 20 mm (chamfering not required)
  • Pressure ring bolts tighten all the way

Materials:

  • Pressure ring and adapter housing / Center pipe: Rolled steel according to British standard BS EN 10025-2: 2004 Grade S275
  • Bolts: Steel according to BS EN ISO 898-1: 2009. Material category 4.8
  • Nuts: Steel according to British standard BS EN 4190: 2001 Grade 4
  • Washers: Stainless steel in accordance with BS 1449: Part 2: 1983. Grade 304 S15
  • Sealing collar: EPDM
Size: 733-750 mm
Photo Draft
Photo Viking Johnson MaxiFit Coupling for ductile iron, steel and PVC pipes, d 85-107 mm [Code number: MF85] Draft Viking Johnson MaxiFit Coupling for ductile iron, steel and PVC pipes, d 85-107 mm [Code number: MF85]
Viking Johnson MaxiFit Coupling for ductile iron, steel and PVC pipes, d 85-107 mm [Code number: MF85]
Details 		MF85

Application purpose:

  • For connection pipes made of cast iron, steel, PVC, as well as some other materials (pipes made of PE are mounted using a sleeve) in various combinations
  • For neutral liquids at permissible operating temperature + 50 °С

Characteristics:

  • Operating pressure up to 16 bar
  • One type of pipe coupling made of different materials
  • The design provides easy and quick installation
  • The gap between the ends of the pipes is necessary to: compensate for thermal expansion, prevent transmission of vibration, compensate for sedimentation and facilitate installation/dismantling

Installation:

  • Pipes are inserted into a freely assembled freely assembled coupling, with a gap between the ends of the pipes of about 20 mm (chamfering not required)
  • Pressure ring bolts tighten all the way

Materials:

  • Pressure ring and adapter housing / Center pipe: Ductile iron according to BS EN 1563:1997
  • Bolts: Steel to BS EN ISO 898-1: 2009. Strength Class 4.8
  • Nuts: Steel in accordance with BS EN 4190: 2001. Grade 4
  • Sealing collar: EPDM
Nominal size Outer diameter Diameter (M) Length (L) Length and thickness of the adapter pipe (A x T) Landing gap Bolts. Quantity diam. x length Weight
  Min Max       Min Max    
mm mm mm mm mm mm mm mm mm kg
DN80 85,0 107,0 195,5 190,0 95,0 x 4,5 20,0 40,0 4-M12 x 180 4,1

See also

PP-adapter Konfix etc.
Strengthen connecting elements
Connecting elements
© Inrusstrade.ru 1999-2025. "Inrusstrade" Ltd. Copying and quoting is prohibited