Logo
Ru| En
Loading

Distribution manifolds of REHAU RAUTITAN

Distribution manifolds are designed for branching REHAU RAUTITAN radiator system. They are made of brass, manifolds have highly resistant to aggressive environments and corrosion. Also they confirm with hygiene requirements and the highest quality standards.

The distribution manifolds are produced in various sizes for connection to them up to 12 radiators.

The distribution manifolds for REHAU RAUTITAN system are supplied full-fledged. The kit includes:

  • Ball valves;
  • Brackets;
  • Air vent which is operating in automatic mode;
  • Flowmeters etc.

Also this group of products includes special manifold cabinets which can be built in a wall. The manifold cabinets are equipped with special holes DN48 for the main supply and return lines. The holes are located on all sides of the manifold cabinet. Also the package includes rubber penetration seals 28-34 used together with pipes which have an outside diameter of at least 28mm and not more than 34 mm. The rubber seals are inserted into the holes of the manifold cabinet before pipeline installation. In addition, holes DN28 are provided at the bottom and top of the manifold cabinet used together with rubber seal 25 which is suitable for pipes with outer diameters between 24 and 25 mm.

Brackets can be adjusted in width and height for the most convenient installation of the distribution manifold in the manifold cabinet. They are made of galvanized steel.

Photo Наименование Article Цена
Rehau RAUTITAN distribution manifold HLV to 2 groups [Code number: 232 021 001]
Details
232 021 001 8 610 rub

The kit of the distribution manifold includes:

  • Distribution pipes (2 pcs.) which were tested of pressure;
  • Connection nipple set, cone 3/4";
  • Ball valves G1" with union nut and flat seal;
  • Plugs (2 pcs.) G1".

The manifolds are mounted on soundproofed brackets.

The distribution manifold is used for the bifurcation heating circuits.

Material: brass according to DIN EN 1244, DIN EN 12164, DIN EN 12165, DIN EN 12168.

a b c Heating circuits Weight
mm mm mm   kg/pc
115 210 55 2 2,100
Rehau RAUTITAN distribution manifold HLV to 10 groups [Code number: 232 101 001]
Details
232 101 001 17 134 rub

The kit of the distribution manifold includes:

  • Distribution pipes (2 pcs.) which were tested of pressure;
  • Connection nipple set, cone 3/4";
  • Ball valves G1" with union nut and flat seal;
  • Plugs (2 pcs.) G1".

The manifolds are mounted on soundproofed brackets.

The distribution manifold is used for the bifurcation heating circuits.

Material: brass according to DIN EN 1244, DIN EN 12164, DIN EN 12165, DIN EN 12168.

a b c Heating circuits Weight
mm mm mm   kg/pc
555 210 55 10 3,760
Rehau RAUTITAN distribution manifold HLV to 10 groups, stainless steel [Code number: 110 216 001]
Details
110 216 001 13 815 rub

Rehau RAUTITAN distribution manifold HLV to 10 groups is used in the heating system.

The kit includes:

  • Manifolds (flow and return), which are wquipped with external thread G1";
  • Nickel-plated plugs (2 pcs.) G1", which are equipped with air valves and seals;
  • Nipple outlets which are needed to Eurocone connection G3/4".

The manifolds are mounted on soundproofed brackets.

a b c Heating circuits Weight
mm mm mm   kg/pc
558 210 50 10 4,900
Rehau RAUTITAN distribution manifold HLV to 11 groups [Code number: 232 111 001]
Details
232 111 001 18 263 rub

The kit of the distribution manifold includes:

  • Distribution pipes (2 pcs.) which were tested of pressure;
  • Connection nipple set, cone 3/4";
  • Ball valves G1" with union nut and flat seal;
  • Plugs (2 pcs.) G1".

The manifolds are mounted on soundproofed brackets.

The distribution manifold is used for the bifurcation heating circuits.

Material: brass according to DIN EN 1244, DIN EN 12164, DIN EN 12165, DIN EN 12168.

a b c Heating circuits Weight
mm mm mm   kg/pc
610 210 55 11 3,980
Rehau RAUTITAN distribution manifold HLV to 11 groups, stainless steel [Code number: 110 217 001]
Details
110 217 001 14 896 rub

Rehau RAUTITAN distribution manifold HLV to 11 groups is used in the heating system.

The kit includes:

  • Manifolds (flow and return), which are wquipped with external thread G1";
  • Nickel-plated plugs (2 pcs.) G1", which are equipped with air valves and seals;
  • Nipple outlets which are needed to Eurocone connection G3/4".

The manifolds are mounted on soundproofed brackets.

a b c Heating circuits Weight
mm mm mm   kg/pc
608 210 50 11 5,100
Rehau RAUTITAN distribution manifold HLV to 12 groups [Code number: 232 121 001]
Details
232 121 001 19 220 rub

The kit of the distribution manifold includes:

  • Distribution pipes (2 pcs.) which were tested of pressure;
  • Connection nipple set, cone 3/4";
  • Ball valves G1" with union nut and flat seal;
  • Plugs (2 pcs.) G1".

The manifolds are mounted on soundproofed brackets.

The distribution manifold is used for the bifurcation heating circuits.

Material: brass according to DIN EN 1244, DIN EN 12164, DIN EN 12165, DIN EN 12168.

a b c Heating circuits Weight
mm mm mm   kg/pc
665 210 55 12 4,100
Rehau RAUTITAN distribution manifold HLV to 12 groups, stainless steel [Code number: 110 218 001]
Details
110 218 001 15 918 rub

Rehau RAUTITAN distribution manifold HLV to 12 groups is used in the heating system.

The kit includes:

  • Manifolds (flow and return), which are wquipped with external thread G1";
  • Nickel-plated plugs (2 pcs.) G1", which are equipped with air valves and seals;
  • Nipple outlets which are needed to Eurocone connection G3/4".

The manifolds are mounted on soundproofed brackets.

a b c Heating circuits Weight
mm mm mm   kg/pc
658 210 50 12 5,500
Rehau RAUTITAN distribution manifold HLV to 2 groups, stainless steel [Code number: 110 202 001]
Details
110 202 001 5 251 rub

Rehau RAUTITAN distribution manifold HLV made of stainless steel is used in the heating system.

The kit includes:

  • Manifolds (flow and return), which are wquipped with external thread G1";
  • Nickel-plated plugs (2 pcs.) G1", which are equipped with air valves and seals;
  • Nipple outlets which are needed to Eurocone connection G3/4".

The manifolds are mounted on soundproofed brackets.

You can use straight nickel-plated ball valves 1" or elbow nickel ball valves 1" with the distribution manifold .

Heating circuits: 2.

a b c Heating circuits Weight
mm mm mm   kg/pc
158 210 50 2 2,200
Rehau RAUTITAN distribution manifold HLV to 3 groups [Code number: 232 031 001]
Details
232 031 001

The kit of the distribution manifold includes:

  • Distribution pipes (2 pcs.) which were tested of pressure;
  • Connection nipple set, cone 3/4";
  • Ball valves G1" with union nut and flat seal;
  • Plugs (2 pcs.) G1".

The manifolds are mounted on soundproofed brackets.

The distribution manifold is used for the bifurcation heating circuits.

Material: brass according to DIN EN 1244, DIN EN 12164, DIN EN 12165, DIN EN 12168.

a b c Heating circuits Weight
mm mm mm   kg/pc
170 210 55 3 2,320
Rehau RAUTITAN distribution manifold HLV to 3 groups, stainless steel [Code number: 110 204 001]
Details
110 204 001 6 809 rub

Rehau RAUTITAN distribution manifold HLV made of stainless steel is used in the heating system.

The kit includes:

  • Manifolds (flow and return), which are wquipped with external thread G1";
  • Nickel-plated plugs (2 pcs.) G1", which are equipped with air valves and seals;
  • Nipple outlets which are needed to Eurocone connection G3/4".

The manifolds are mounted on soundproofed brackets.

You can use straight nickel-plated ball valves 1" or elbow nickel ball valves 1" with the distribution manifold .

Heating circuits: 3.

a b c Heating circuits Weight
mm mm mm   kg/pc
208 210 50 3 2,500
Rehau RAUTITAN distribution manifold HLV to 4 groups [Code number: 232 041 001]
Details
232 041 001 11 132 rub

The kit of the distribution manifold includes:

  • Distribution pipes (2 pcs.) which were tested of pressure;
  • Connection nipple set, cone 3/4";
  • Ball valves G1" with union nut and flat seal;
  • Plugs (2 pcs.) G1".

The manifolds are mounted on soundproofed brackets.

The distribution manifold is used for the bifurcation heating circuits.

Material: brass according to DIN EN 1244, DIN EN 12164, DIN EN 12165, DIN EN 12168.

a b c Heating circuits Weight
mm mm mm   kg/pc
225 210 55 4 2,540
Rehau RAUTITAN distribution manifold HLV to 4 groups, stainless steel [Code number: 110 206 001]
Details
110 206 001 7 791 rub

Rehau RAUTITAN distribution manifold HLV is used in the heating system.

The kit includes:

  • Manifolds (flow and return), which are wquipped with external thread G1";
  • Nickel-plated plugs (2 pcs.) G1", which are equipped with air valves and seals;
  • Nipple outlets which are needed to Eurocone connection G3/4".

The manifolds are mounted on soundproofed brackets.

a b c Heating circuits Weight
mm mm mm   kg/pc
258 210 50 4 2,800
Rehau RAUTITAN distribution manifold HLV to 5 groups [Code number: 232 051 001]
Details
232 051 001 12 089 rub

The kit of the distribution manifold includes:

  • Distribution pipes (2 pcs.) which were tested of pressure;
  • Connection nipple set, cone 3/4";
  • Ball valves G1" with union nut and flat seal;
  • Plugs (2 pcs.) G1".

The manifolds are mounted on soundproofed brackets.

The distribution manifold is used for the bifurcation heating circuits.

Material: brass according to DIN EN 1244, DIN EN 12164, DIN EN 12165, DIN EN 12168.

a b c Heating circuits Weight
mm mm mm   kg/pc
280 210 55 5 2,760
Rehau RAUTITAN distribution manifold HLV to 5 groups, stainless steel [Code number: 110 207 001]
Details
110 207 001 8 775 rub

Rehau RAUTITAN distribution manifold HLV is used in the heating system.

The kit includes:

  • Manifolds (flow and return), which are wquipped with external thread G1";
  • Nickel-plated plugs (2 pcs.) G1", which are equipped with air valves and seals;
  • Nipple outlets which are needed to Eurocone connection G3/4".

The manifolds are mounted on soundproofed brackets.

a b c Heating circuits Weight
mm mm mm   kg/pc
308 210 50 5 3,100
Rehau RAUTITAN distribution manifold HLV to 6 groups [Code number: 232 061 001]
Details
232 061 001 13 219 rub

The kit of the distribution manifold includes:

  • Distribution pipes (2 pcs.) which were tested of pressure;
  • Connection nipple set, cone 3/4";
  • Ball valves G1" with union nut and flat seal;
  • Plugs (2 pcs.) G1".

The manifolds are mounted on soundproofed brackets.

The distribution manifold is used for the bifurcation heating circuits.

Material: brass according to DIN EN 1244, DIN EN 12164, DIN EN 12165, DIN EN 12168.

a b c Heating circuits Weight
mm mm mm   kg/pc
335 210 55 6 2,980
Rehau RAUTITAN distribution manifold HLV to 6 groups, stainless steel [Code number: 110 208 001]
Details
110 208 001 9 908 rub

Rehau RAUTITAN distribution manifold HLV to 6 groups is used in the heating system.

The kit includes:

  • Manifolds (flow and return), which are wquipped with external thread G1";
  • Nickel-plated plugs (2 pcs.) G1", which are equipped with air valves and seals;
  • Nipple outlets which are needed to Eurocone connection G3/4".

The manifolds are mounted on soundproofed brackets.

a b c Heating circuits Weight
mm mm mm   kg/pc
358 210 50 6 3,400
Rehau RAUTITAN distribution manifold HLV to 7 groups [Code number: 232 071 001]
Details
232 071 001 14 176 rub

The kit of the distribution manifold includes:

  • Distribution pipes (2 pcs.) which were tested of pressure;
  • Connection nipple set, cone 3/4";
  • Ball valves G1" with union nut and flat seal;
  • Plugs (2 pcs.) G1".

The manifolds are mounted on soundproofed brackets.

The distribution manifold is used for the bifurcation heating circuits.

Material: brass according to DIN EN 1244, DIN EN 12164, DIN EN 12165, DIN EN 12168.

a b c Heating circuits Weight
mm mm mm   kg/pc
390 210 55 7 3,100
Rehau RAUTITAN distribution manifold HLV to 7 groups, stainless steel [Code number: 110 209 001]
Details
110 209 001 10 822 rub

Rehau RAUTITAN distribution manifold HLV to 7 groups is used in the heating system.

The kit includes:

  • Manifolds (flow and return), which are wquipped with external thread G1";
  • Nickel-plated plugs (2 pcs.) G1", which are equipped with air valves and seals;
  • Nipple outlets which are needed to Eurocone connection G3/4".

The manifolds are mounted on soundproofed brackets.

a b c Heating circuits Weight
mm mm mm   kg/pc
408 210 50 7 3,800
Rehau RAUTITAN distribution manifold HLV to 8 groups [Code number: 232 081 001]
Details
232 081 001 15 219 rub

The kit of the distribution manifold includes:

  • Distribution pipes (2 pcs.) which were tested of pressure;
  • Connection nipple set, cone 3/4";
  • Ball valves G1" with union nut and flat seal;
  • Plugs (2 pcs.) G1".

The manifolds are mounted on soundproofed brackets.

The distribution manifold is used for the bifurcation heating circuits.

Material: brass according to DIN EN 1244, DIN EN 12164, DIN EN 12165, DIN EN 12168.

a b c Heating circuits Weight
mm mm mm   kg/pc
445 210 55 8 3,320
Rehau RAUTITAN distribution manifold HLV to 8 groups, stainless steel [Code number: 110 212 001]
Details
110 212 001 11 865 rub

Rehau RAUTITAN distribution manifold HLV to 8 groups is used in the heating system.

The kit includes:

  • Manifolds (flow and return), which are wquipped with external thread G1";
  • Nickel-plated plugs (2 pcs.) G1", which are equipped with air valves and seals;
  • Nipple outlets which are needed to Eurocone connection G3/4".

The manifolds are mounted on soundproofed brackets.

a b c Heating circuits Weight
mm mm mm   kg/pc
458 210 50 8 4,100

See also