Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Наименование Article Цена
Photo Draft
Photo 70˚ single branch PAM-GLOBAL® S Photo 70˚ single branch PAM-GLOBAL® S Draft 70˚ single branch PAM-GLOBAL® S
1 2
70˚ single branch PAM-GLOBAL® S
Details

According to DIN 1986 Part 1, Edition June 1988, Section 6.2.7.1, 88˚ single branches are used for connection branches of pipelines up to DN70 to the risers DN 100 because the withdrawal is impracticable in the piping branches. Also PAM GLOBAL® S 88˚ single branches with angle of entry 45˚ allow to connect fittings larger diameters (ranging from DN 100) with angle of 88˚ to the riser. This saves space and ensures branches of pipelines without suction. So, 70˚ single branches almost do not need now, so they are no longer present in the remaining national standards DIN 19 522. However, because there is still a demand for some SML 70˚ single branches we are still support a limited range of the 70˚ single branches.

Nominal internal diameter X1 X2 X3 L Weight Code number
DN         kg  
50x50 55 80 80 135 1,0 155768
70x50* 55 90 90 145 1,3 155788
70x70* 70 100 100 170 1,7 155805
75x50 60 95 95 155 1,4 156488
75x75 70 110 110 180 1,4 156542
100x50 55 110 100 155 2 156616
100x75 70 125 115 185 2,6 156623
100x100 85 130 130 215 2,9 155856
125x50 55 120 110 165 2,6 под заказ
125x100 85 145 140 225 4,0 155881
125x125 100 155 155 255 4,5 156811
150x100 85 155 150 235 4,8 156877
150x125 100 170 165 265 5,7 156881
150x150 115 180 180 295 6,5 156929
200x100 85 185 175 260 7,2 под заказ
200x150 110 210 200 310 8,5 156987
200x200 140 225 225 365 12 157027
250x200 135 265 255 390 18,3 157076
250x250 170 285 285 460 21,1 157104
300x300 170 345 345 545 33,4 157167

Dimensions are presented in mm

* Diameter 80 gradually replace diameter 70
Photo Draft
Photo Bend PAM-GLOBAL® S 30˚ Draft Bend PAM-GLOBAL® S 30˚
Bend PAM-GLOBAL® S 30˚
Details
Nominal internal diameter X Weight Code number
DN mm kg  
50 45 0,5 155753
70* 50 0,7 155782
80 50 0,8 176703
100 60 1,4 155817
125 70 2,0 155871
150 80 3,0 155904
200 95 5,1 155933
250 110 9,5 155948
300 130 13,8 155960
400 184 26 170731

 *Diameter 80 gradually replace diameter 70
Photo Draft
Photo 88˚ single branch PAM-GLOBAL® Plus Draft 88˚ single branch PAM-GLOBAL® Plus
88˚ single branch PAM-GLOBAL® Plus
Details
Nominal internal diameter X1 X2 X3 L Weight Code number
DN         kg  
50x50 79 80 66 145 1,00 155212
80x50 85 90 75 160 1,40 176744
80x80 95 95 85 180 1,80 176745
100x50 94 105 76 170 2,05 155244
100x80 100 110 90 190 2,44 176746
100x100 115 115 105 220 2,65 155253
125x100 125 139 110 235 4,2 173022
125x125 137 135 123 260 5 155407
150x100 130 145 115 245 5,6 155428
150x150 158 155 142 300 6,7 155440
200x200 193 183 172 365 11 155468
250x250 240 243 228 455 19,5 155488
300x300 265 265 265 530 35 155505
400x400 370 370 314 684 67 on order

Dimensions are presented in mm
Photo Draft
Photo Anti syphonic trap PAM-GLOBAL® S Draft Anti syphonic trap PAM-GLOBAL® S
Anti syphonic trap PAM-GLOBAL® S
Details
Nominal internal diameter I h X1 X2 X3 X4 w Weight Code number
DN mm mm mm mm mm mm mm kg  
50 165 230 183 47 136 24 80 2,4 156422
80 240 300 231 69 198,5 41,5 80 5,0 156522
Photo Draft
Photo 88˚ double branch PAM-GLOBAL® S (angle of entry 45˚) Draft 88˚ double branch PAM-GLOBAL® S (angle of entry 45˚)
88˚ double branch PAM-GLOBAL® S (angle of entry 45˚)
Details
Nominal internal diameter X1 X2 X3 L Weight Code number
DN         kg  
100x50x50 94 76 105 180 2,2 155825
100x70x70* 102 88 110 190 2,7 155826
100x80x80 100 90 110 190 2,8 179685
100x100x100 115 105 120 220 3,7 155858
125x100x100 130 115 135 245 5,0 155874
150x100x100 130 115 145 245 7,1 155907

Dimensions are presented in mm

*Diameter 80 gradually replace diameter 70
Photo Draft
Photo Expansion plug PAM-GLOBAL® Plus Draft Expansion plug PAM-GLOBAL® Plus
Expansion plug PAM-GLOBAL® Plus
Details
Nominal internal diameter L Weight Code number
DN mm kg  
50 47 0,22 155303
75 71 0,6 155322
100 55 1,0 155351
125 53 1,3 155392
150 53 2,1 155417
200 63 4,2 155450
250 100 6,2 155478
300 100 9 155495
Photo Draft
Photo PAM-GLOBAL® Plus Stack support pipe Draft PAM-GLOBAL® Plus Stack support pipe
PAM-GLOBAL® Plus Stack support pipe
Details
Nominal internal diameter L H W b e f g Ø ext Weight Code number
DN                 kg  
50 195 220 108 8 150 17 30 108 2,5 212273
75 218 220 133 8 175 19 30 133 3,1 211041
100 259 220 162 8 214 20 32 162 4,3 171912
125 275 220 187 8 228 20 32 197 5,4 211042
150 300 220 222 8 255 22 32 222 7,2 171914
300 498 300 406 8 448 30 40 406 26,5 208264
400 600 340 508 10 550 30 50 508 43,9 on request

Dimensions are presented in mm

Usage example
Photo
Photo Gasket PAM-GLOBAL® S
Gasket PAM-GLOBAL® S
Details
Nominal internal diameter Code number EPDM Weight Code number NBR Weight
DN   kg   kg
75 179894 0,2 179895 0,2
100 207320 0,3 207319 0,3
125 207335 0,3 207334 0,3
Photo Draft
Photo Bend PAM-GLOBAL® Plus 30˚ Draft Bend PAM-GLOBAL® Plus 30˚
Bend PAM-GLOBAL® Plus 30˚
Details
Nominal internal diameter X Weight Code number
DN mm kg  
50 45 0,47 155203
80 50 0,79 176782
100 60 1,40 155238
125 70 2,00 155263
150 80 3,00 155279
200 95 5,10 179335
250 110 9,50 179336
300 130 13,80 179337
Photo Draft
Photo PAM-GLOBAL® Plus double branch 88˚ Draft PAM-GLOBAL® Plus double branch 88˚
PAM-GLOBAL® Plus double branch 88˚
Details
Nominal internal diameter X1 X2 X3 X4 X5 L Weight Code number
DN             kg  
100x100x100 115 115 120 105 105 230 3,70 155382

Dimensions are presented in mm
Photo Draft
Photo Hutterer & Lechner Tubular trap with ball-joint outlet, DN40x1 1/2' [Code number: HL 100G/40] Draft Hutterer & Lechner Tubular trap with ball-joint outlet, DN40x1 1/2' [Code number: HL 100G/40]
Hutterer & Lechner Tubular trap with ball-joint outlet, DN40x1 1/2' [Code number: HL 100G/40]
Details 		HL 100G/40 2 114 rub

Tubular trap HL 100G/40 DN40 horizontal is equipped with a ball-joint outlet. The device is made of polypropylene and has weight of 220 g. There is threaded connection 6/4". Height of the nozzle can adjust if necessary.

Diameter Material Weight
DN, mm   gr
40 polypropylene 220

Documentation

Download data sheet: Tubular trap HL 100G/40

Download example of product installation:  Tubular trap HL 100G/40

Photo Draft
Photo Hutterer & Lechner Wash-basin trap with appliance hose connector and rosette, DN32x1 1/4' [Code number: HL 132.1/30] Draft Hutterer & Lechner Wash-basin trap with appliance hose connector and rosette, DN32x1 1/4' [Code number: HL 132.1/30]
Hutterer & Lechner Wash-basin trap with appliance hose connector and rosette, DN32x1 1/4' [Code number: HL 132.1/30]
Details 		HL 132.1/30 2 975 rub

HL 132.1/30 wash-basin trap DN32 x 1 1/4' horizontal is connected to a wash basin. It is made of polypropylene and has a weight is 220 grams. The wash-basin trap can connect to a dishwasher or washing machine, height of the dip tube is adjusted. HL 132.1/30 is equipped with a decorative rosette, which allows it fits easily into the interior.

Diameter Material Weight
DN, mm   gr
32 polypropylene 220
Photo Draft
Photo Hutterer & Lechner Waste and overflow with plug and chain for bath tubs, 1 1/2' [Code number: HL 51] Draft Hutterer & Lechner Waste and overflow with plug and chain for bath tubs, 1 1/2' [Code number: HL 51]
Hutterer & Lechner Waste and overflow with plug and chain for bath tubs, 1 1/2' [Code number: HL 51]
Details 		HL 51 3 270 rub

Application area:

  • For bath
  • For shower trays

Characteristics:

  • Material: PP
  • Size: 6/4"
  • Capacity: 0.92 l/s
  • Mounted at a height of 80 mm

Product weight: 0.29 kg
Photo Draft
Photo PAM-GLOBAL® Plus T-shaped connector for pipes Draft PAM-GLOBAL® Plus T-shaped connector for pipes
PAM-GLOBAL® Plus T-shaped connector for pipes
Details
Nominal internal diameter X1 X2 K1 K2 Weight Code number
DN mm mm mm mm kg  
50 x 50 x 50 200 160 125 85 2,5 155214
Photo Draft
Photo Anti syphonic trap PAM-GLOBAL® S with bottom access door Draft Anti syphonic trap PAM-GLOBAL® S with bottom access door
Anti syphonic trap PAM-GLOBAL® S with bottom access door
Details
Nominal internal diameter L H W c d Weight Code number
DN mm mm mm mm mm kg  
50 165 255 58 80 187 2,5 229107
Photo Draft
Photo Bend PAM-GLOBAL® S 45˚ Draft Bend PAM-GLOBAL® S 45˚
Bend PAM-GLOBAL® S 45˚
Details
Nominal internal diameter X Weight Code number
DN mm kg  
50 50 0,6 155751
70* 60 0,7 155780
80 60 0,8 176704
100 70 1,4 155815
125 80 2,3 155869
150 90 3,0 155902
200 110 5,3 155931
250 130 9,5 155947
300 155 15,9 155959
400 247 34,4 157175

 *Diameter 80 gradually replace diameter 70
Photo Draft
Photo Single branch PAM-GLOBAL® S 88˚ with elongated side, angle of entry 45˚ Draft Single branch PAM-GLOBAL® S 88˚ with elongated side, angle of entry 45˚
Single branch PAM-GLOBAL® S 88˚ with elongated side, angle of entry 45˚
Details
Nominal internal diameter X1 X2 X3 L K Weight Code number
DN           kg  
100x100 325 115 105 430 210 4,6 155861

Dimensions are presented in mm
Photo Draft
Photo 88˚ corner branch PAM-GLOBAL® S (angle of entry 45˚, angle of thrust 90˚) Draft 88˚ corner branch PAM-GLOBAL® S (angle of entry 45˚, angle of thrust 90˚)
88˚ corner branch PAM-GLOBAL® S (angle of entry 45˚, angle of thrust 90˚)
Details
Nominal internal diameter X1 X2 X3 L Weight Code number
DN         kg  
80x80x80 95 95 95 180 2,0 179682
100x70x70* 102 110 88 190 2,7 155839
100x80x80 100 110 90 220 2,8 179683
100x100x100 115 120 105 230 3,4 155860
125x70x70 107 125 93 200 3,7 155888
125x100x100 125 130 110 235 5,0 155889
150x100x100 130 145 115 245 7,1 155919

Dimensions are presented in mm

*Diameter 80 gradually replace diameter 70
Photo Draft
Photo PAM-GLOBAL® Plus Corner branch 45° Photo PAM-GLOBAL® Plus Corner branch 45° Draft PAM-GLOBAL® Plus Corner branch 45°
PAM-GLOBAL® Plus Corner branch 45°
Details
Nominal internal diameter L H W b c d p q r Weight Code number
DN                   kg  
100x100 227 260 227 190 190 70 242 166 46 5,2 155387

Dimensions are presented in mm
Photo Draft
Photo Bend PAM-GLOBAL® Plus 45˚ Draft Bend PAM-GLOBAL® Plus 45˚
Bend PAM-GLOBAL® Plus 45˚
Details
Nominal internal diameter X Weight Code number
DN mm kg  
50 50 0,56 155201
80 60 0,79 176735
100 70 1,40 155236
125 80 2,25 155261
150 90 3,00 155277
200 110 5,30 155289
250 130 9,50 155481
300 155 15,90 155498
400 247 34,40 155509
© Inrusstrade.ru 1999-2026. "Inrusstrade" Ltd. Copying and quoting is prohibited