Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
Crosses are used to create two branches (in some cases three) from the main pipeline.
Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
Reducers are used to connect sewer pipes with different diameters.
Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
Siphons are mounted with sanitary equipment.
Brackets allow you to rigidly fix the pipeline system.
Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.

Photo Наименование Article Цена

Photo Hutterer & Lechner Wash-basin trap with appliance hose connector, cleaning eye, swivelling outlet and rosette, DN40x1 1/4' [Code number: HL 133/40]

Draft Hutterer & Lechner Wash-basin trap with appliance hose connector, cleaning eye, swivelling outlet and rosette, DN40x1 1/4' [Code number: HL 133/40]

Hutterer & Lechner Wash-basin trap with appliance hose connector, cleaning eye, swivelling outlet and rosette, DN40x1 1/4' [Code number: HL 133/40]

Details

HL 133/40

2 773 rub

HL 133/40 wash-basin trap DN40x1 1/4' horizontal is connected to a wash basin and it has appliance hose connector 3/4'. The wash-basin trap can connect to a dishwasher or washing machine. HL 133/40 is equipped with a decorative rosette, non-return valve, cleaning eye/tray and swivelling outlet.

Diameter	Material	Weight
DN, mm		gr
40	polypropylene	225

Documentation

Download example of product installation: Wash-basin trap HL 133/40

Hutterer & Lechner Drip funnel, with trap seal, DN32 [Code number: HL 21] (Russia)

Details

HL21

2 581 rub

Application purpose:

For draining condensate from air conditioners or fan coil units
For the removal of hot water from storage water heaters, if the safety valves of the safety groups have tripped
For diverting wastewater with jet break

Characteristics:

there is a water seal (height 60 mm);
equipped with a mechanical odor locking device;
operation is possible at temperatures from 0°С to +100°С;
warranty period: 1 year;
service life: 50 years.

Produced in Russia.

Technical characteristics

Diameter	Material	Capacity	Weight
DN, mm		l/s	gr
32	polypropylene	0,17	90

Download data sheet: Drip funnel HL 21

Download example of product installation: Drip funnel HL 21

Hutterer & Lechner Waste and overflow assembly with integrated water feed 3/4', ball-joint tub-trap 1 1/2', bowden cable 60cm [Code number: HL 560N]

Details

HL 560N

29 707 rub

Application area:

For bath

Characteristics:

Material: PP (visible parts chrome-plated)
Size: DN40/50
There is a device for filling
There is an overflow
Drain hole diameter is 60mm
Exhaust type: swivel (allows it to rotate 280° horizontally as well as 10° vertically)
There is a fitting that allows you to connect a drainage tube (size from 8 to 13 mm)
Equipped with double seal for release
There is a Bowden cable (length is 60 cm) - CrNi 18/10 steel is used for manufacturing

Capacity: 0.67 l/s

Mounting at a height of 107 mm.

Product weight: 2,34 kg

Documentation

Download example of product installation: Waste and overflow assembly HL 560N

PAM-GLOBAL® S Combination branch

Details

Nominal internal diameter	H	Weight	Code number
DN	mm	kg
100x70x100	230	4.5	171524
100x80x100	230	4.3	176658
100x100x100	230	4.3	175605

PAM-GLOBAL® S Object connection bend 88° for wash-basins, sinks and urinal units

Details

Nominal internal diameter	X₁	X₂	K₁	K₂	Weight	Code number
DN	mm	mm	mm	mm	kg
50 x 50	200	110	120	25	1,5	155756
50 x 60	200	110	120	30	1,6	155757

Bend PAM-GLOBAL® S 45˚ with elongated side 250 mm

Details

Nominal internal diameter	X₁	X₂	K	Weight	Code number
DN	mm	mm	mm	kg
70*	250	60	190	2,6	155786
80	250	60	190	2,7	179680
100	250	70	140	4,2	155824

*Diameter 80 gradually replace diameter 70

PAM-GLOBAL® double branch with outlets 90°, offset

Details

Nominal internal diameter	H	Weight	Code number
DN	mm	kg
100 x 100 x 100	220	4,0	179616

WC Special multiple branch PAM-GLOBAL® S, left hand

Details

Nominal internal diameter	Range	Weight	Code number
DN		kg
100	Left	5,8	155848

Bend PAM-GLOBAL® Plus 45˚ with elongated side 250mm

Details

Nominal internal diameter	X₁	X₂	K	Weight	Code number
DN	mm	mm	mm	kg
100	250	70	180	4,2	155243

Single long arm branch PAM-GLOBAL® Plus

Details

Nominal internal diameter	L	H	W	a	b	c	p	Weight	Code number
DN								kg
100x100	283	450	110	450	282	70	340	6	155389

Dimensions are presented in mm

Parallel branch PAM-GLOBAL® S

Details

Nominal internal diameter	dn	L	b	a	h	e	k	Weight	Code number
DN	mm	mm	mm	mm	mm	mm	mm	kg
100	70	400	215	55	275	31	125	5,43	155832

Hutterer & Lechner Waste valve for HL520-series [Code number: HL 0520.1E]

Details

HL 0520.1E

Application purposes:

For HL520-series

Material: PP

Weight: 0,039 kg

Hutterer & Lechner Space saver tubular trap with connector DN40x1 1/2' for double sinks, ball-joint outlet, DN40x1 1/2' [Code number: HL 126.2/40]

Details

HL 126.2/40

6 869 rub

Space saver tubular trap HL 126.2/40 DN 40 horizontal is made of polypropylene. This device is designed so that it saves a lot of space under a sink, and trap is equipped with ball-joint outlet. Trap with connector DN40 x 1 1/2' for double sinks.

Diameter	Material	Weight
DN, mm		gr
40	polypropylene	580

Hutterer & Lechner Concealed trap with removable trap insert, DN40 [Code number: HL 134.0/40]

Details

HL 134.0/40

3 575 rub

HL 134.0/40 concealed trap is embedded into the wall. HL 134.0/40 is made of polypropylene, it has diameter of 40 mm and capacity of 0.38 l/s. Trap insert can be removed if necessary.

Diameter	Material	Capacity	Weight
DN, mm		l/s	gr
40	polypropylene	0,38	380

Hutterer & Lechner Drip funnel with pipe clip, 1 1/2' [Code number: HL 20]

Details

HL 20

2 604 rub

Drip funnel HL 20 is used on air conditioners and manufactured by Hutterer Lechner. It can take water with jet break. Size of drip funnel is 170*92 mm. The drip funnel is made of polypropylene, its weight of 115 grams. With female thread 6/4". Also drip funnel is equipped with a pipe clip.

Diameter	Material	Weight
inch		gr
6/4"	polypropylene	115

Documentation

Download data sheet: Drip funnel HL 20

Download example of product installation: Drip funnel HL 20

Hutterer & Lechner Waste and overflow assembly with integrated water feed 3/4', ball-joint tub-trap 1 1/2', bowden cable 80cm [Code number: HL 560N.L]

Details

HL 560N.L

26 871 rub

Application area:

For bath

Characteristics:

Material: PP (visible parts chrome-plated)
Size: DN40/50
There is a device for filling
Water can be connected both on the left and on the right
Equipped with overflow
Drain hole diameter is 60mm
Exhaust type: swivel (allows it to rotate 280° horizontally and 10° vertically)
There is a fitting that allows you to connect a drainage tube (size from 8 to 13 mm)
The outlet is equipped with a double seal
There is a Bowden cable (length 80 cm) - CrNi 18/10 steel is used for manufacturing

Capacity: 0.67 l/s.

Mounting at a height of 107 mm.

Product weight: 2,34 kg.