Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
Crosses are used to create two branches (in some cases three) from the main pipeline.
Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
Reducers are used to connect sewer pipes with different diameters.
Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
Siphons are mounted with sanitary equipment.
Brackets allow you to rigidly fix the pipeline system.
Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.

Photo Наименование Article Цена

Single long arm branch PAM-GLOBAL® S

Details

Nominal internal diameter	L	H	W	a	b	c	p	Weight	Code number
DN								kg
100x100	282	450	110	450	282	70	340	6	156726

Dimensions are presented in mm

Photo Manifold connectors PAM-GLOBAL® S multi-waste

Manifold connectors PAM-GLOBAL® S multi-waste

Details

Nominal internal diameter	L	H	W	a	d	e	Weight	Code number
DN	mm	mm	mm	mm	mm	mm	kg
100	204	125	200	43	142	62	3,2	175626
150	265	165	290	70	184	81	6,1	175629

Double branch PAM-GLOBAL® S 88˚ with elongated side

Details

Nominal internal diameter	L	H	W	b	c	d	p	q	r	Weight	Code number
DN										kg
100x100x100	243	405	110	110	120	295	222	244	354	5,9	176883

Dimensions are presented in mm

Double bend PAM-GLOBAL® Plus 88˚

Details

Nominal internal diameter	L	H	W	a	b	c	o	Weight	Code number
DN	mm	mm	mm	mm	mm	mm	mm	kg
50	148	148	58	121	50	100	148	1	179343
75	183	183	83	145	60	120	183	1,5	235801
100	228	228	110	170	70	140	228	2,8	155359
150	303	303	160	219	90	180	303	6,3	155422

Hutterer & Lechner Lip seal for HL 136N [Code number: HL 01088D]

Details

HL 01088D

991 rub

Characteristics of HL sewage equipment:

Complies with ISO 9001
Safety for ecology and health
Products undergo laboratory testing
Durability
Attractive appearance

Suitable for	Weight
	kg/pc
HL 136N	0,001

Hutterer & Lechner Waste gasket for HL520 [Code number: HL 01100D]

Details

HL 01100D

306 rub

Characteristics of HL sewage equipment:

Complies with ISO 9001
Safety for ecology and health
Products undergo laboratory testing
Durability
Attractive appearance

Material: EPDM.

Size	Weight
mm	kg/pc
109x88	0,021

Hutterer & Lechner 90° angled brass-connector, chrome plated, DN32 [Code number: HL 134.1C]

Details

HL 134.1C

8 319 rub

HL 134.1C 90° angled brass-connector is intended for HL 134 and HL 134.0. Angled brass-connector is made of brass, it is chrome plated, diameter 32 x 5/4". Height of the dip tube can be controlled. It also has a threaded connection 5/4.

Diameter	Material	Weight
DN, mm		gr
32 х 5/4"	brass chrome plated	290

Documentation

Download example of product installation: 90° angled brass-connector HL 134.1C

Hutterer & Lechner Non-return valve, 1' [Code number: HL 3]

Details

HL 3

2 054 rub

HL 3 - it is non-return valve 1' with hose connector 3/4'. Valve is made of polypropylene. Weight HL 3 is small - it is only 60 g.

Diameter		Material	Weight
inlet	outlet		gr
1"	3/4"	polypropylene	60

Hutterer & Lechner Visual parts solid brass (price on request) [Code number: HL 555N.2]

Details

HL 555N.2

Application purposes:

For waste and overflow assembly

Characteristics:

brass

Material: Edelmessing

Weight: 0,305 kg

Circuitous Bend PAM-GLOBAL® S 135˚ for bypass system

Details

Nominal internal diameter	X	K	L	Weight	Code number
DN	mm	mm	mm	kg
100	312	100	150	5	155818

К - maximum cut length

Photo PAM-GLOBAL® S multi-waste sewer collectors

PAM-GLOBAL® S multi-waste sewer collectors

Details

Diameter	L	H	W	b	d	f	g	h	j	j	k	Weight	Code number
DN, mm	mm	mm	mm	mm	mm	mm	mm	mm	mm	mm	mm	kg
100	445	582	445	445	340	45	174	22	165	120	110	12,8	261138
150	445	591	445	445	345	55	181	25	220	170	160	17,3	261434

Bend PAM-GLOBAL® Plus 135˚ for bypass line

Details

Nominal internal diameter	X	K	L	Weight	Code number
DN	mm	mm	mm	kg
100	312	100	150	5,0	155239

Corner branch PAM-GLOBAL® S 45˚

Details

Nominal internal diameter	L	H	W	b	c	d	p	q	r	Weight	Code number
DN										kg
100x100x100	227	260	227	190	190	70	242	166	46	5,2	156716

Dimensions are presented in mm

Hutterer & Lechner Waste gasket for HL 522, 109х88mm [Code number: HL 01076D]

Details

HL 01076D

330 rub

Characteristics of HL sewage equipment:

Complies with ISO 9001
Safety for ecology and health
Products undergo laboratory testing
Durability
Attractive appearance

Material: SBR 60.

Size	Weight
mm	kg/pc
109/88	0,016

Hutterer & Lechner Elbow of polypropylene white for HL134 and HL134.0 [Code number: HL 134.1K]

Details

HL 134.1K

Application purposes:

For HL134 and HL134.0

Characteristics:

white

Dimension: DN32 x 5/4"

Material: PP

Weight: 0,144 kg

Documentation

Download example of product installation: Elbow of polypropylene white HL 134.1K

Photo Hutterer & Lechner Concealed trap assembly, consisting of HL134.0, HL44, 2 water feeds solid brass and HL42, DN40 [Code number: HL 134/40]

Hutterer & Lechner Concealed trap assembly, consisting of HL134.0, HL44, 2 water feeds solid brass and HL42, DN40 [Code number: HL 134/40]

Details

HL 134/40

11 146 rub

HL 134/40 concealed trap assembly DN40 is embedded into the wall. Capacity of HL 134/40 is 0,38 l/s. Trap insert can be removed if necessary. There is a mounting plate HL 44 in which are fixed mounting angles 1/2"B. Also, the trap has test plugs HL 42.B and HL 42.R.

Diameter	Material	Capacity	Weight
DN, mm		l/s	gr
40	polypropylene	0,38	880

Hutterer & Lechner Visual parts solid brass, chrome plated [Code number: HL 555N.1]

Details

HL 555N.1

4 213 rub

Application purposes:

For waste and overflow assembly

Characteristics:

chrome plated

Material: MS - beschichtet

Weight: 0,305 kg

Hutterer & Lechner Double appliance hose connector, 1 1/2' x 3/4' [Code number: HL 6]

Details

HL 6

1 487 rub

The connecting element HL 6 is used to connect equipment such as washing machines and dishwashers. Double appliance hose connector 1 1/2' x 3/4', it is made of polypropylene.

Diameter	Material	Weight
inch		gr
6/4"" х 1"	polypropylene	60

PAM-GLOBAL® S Bend 88° with 250 mm calming section

Details

Nominal internal diameter	X₁	X₂	X₃	Weight	Code number
DN	mm	mm	mm	kg
70	60	301	273	2.8	155784
80	60	301	273	2.9	179679
100	70	312	291	4.8	155820
125	80	322	308	6.1	155873
150	90	334	326	9.6	155906

Bend PAM-GLOBAL® Plus 88˚ (two joint bends 44) and soothing area 250mm

Details

Nominal internal diameter	X₁	X₂	X₃	Weight	Code number
DN	mm	mm	mm	kg
100	70	312	291	4,8	155240
125	80	322	308	6,1	179341
150	90	334	326	9,6	179342

The bend is used for the transition from the risers to the decelerated areas of the system. According to DIN 1986, Part 1 in respect of risers, which run from 4 to 8 stories or have length from 10 to 22 m, special stowage arrangements are necessary. Transitions in horizontal pipelines, as well as the bend on the sides of the supply and runoff during the joint laying, must be separated by inserting of length of 250 mm.