Fittings for domestic sewerage

Watch products by Brands

When installing internal sewage, special fittings are used that are connected to pipes:

Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
Crosses are used to create two branches (in some cases three) from the main pipeline.
Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
Reducers are used to connect sewer pipes with different diameters.
Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
Siphons are mounted with sanitary equipment.
Brackets allow you to rigidly fix the pipeline system.
Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.

Photo Name Article Price

Hutterer & Lechner Concealed trap with removable trap insert, DN40 [Code number: HL 134.0/40]

Details

HL 134.0/40

3 211 rub

HL 134.0/40 concealed trap is embedded into the wall. HL 134.0/40 is made of polypropylene, it has diameter of 40 mm and capacity of 0.38 l/s. Trap insert can be removed if necessary.

Diameter	Material	Capacity	Weight
DN, mm		l/s	gr
40	polypropylene	0,38	380

Hutterer & Lechner Drip funnel with pipe clip, 1 1/2' [Code number: HL 20]

Details

HL 20

2 339 rub

Drip funnel HL 20 is used on air conditioners and manufactured by Hutterer Lechner. It can take water with jet break. Size of drip funnel is 170*92 mm. The drip funnel is made of polypropylene, its weight of 115 grams. With female thread 6/4". Also drip funnel is equipped with a pipe clip.

Diameter	Material	Weight
inch		gr
6/4"	polypropylene	115

Download data sheet: Drip funnel HL 20

Hutterer & Lechner Waste and overflow assembly with integrated water feed 3/4', ball-joint tub-trap 1 1/2', bowden cable 80cm [Code number: HL 560N.L]

Details

HL 560N.L

24 132 rub

Application area:

For bath

Characteristics:

Material: PP (visible parts chrome-plated)
Size: DN40/50
There is a device for filling
Water can be connected both on the left and on the right
Equipped with overflow
Drain hole diameter is 60mm
Exhaust type: swivel (allows it to rotate 280° horizontally and 10° vertically)
There is a fitting that allows you to connect a drainage tube (size from 8 to 13 mm)
The outlet is equipped with a double seal
There is a Bowden cable (length 80 cm) - CrNi 18/10 steel is used for manufacturing

Capacity: 0.67 l/s.

Mounting at a height of 107 mm.

Product weight: 2,34 kg.

Photo Bend PAM-GLOBAL® S 88˚ with elongated side 250mm

1 2

Bend PAM-GLOBAL® S 88˚ with elongated side 250mm

Details

Nominal internal diameter	X₁	X₂	K	Weight	Code number
DN	mm	mm	mm	kg
70*	250	90	160	2,8	155785
80	250	95	160	2,9	179681
100	250	110	100	3,6	155823

*Diameter 80 gradually replace diameter 70

Double branch PAM-GLOBAL® S 68˚ with elongated side

Details

Nominal internal diameter	L	H	W	b	c	d	p	q	r	Weight	Code number
DN										kg
100x100x100	280	414	110	130	130	284	244	281	383	6,3	176896

Dimensions are presented in mm

PAM-GLOBAL® S T-shaped connector for pipes

Details

Nominal internal diameter	X₁	X₂	K₁	K₂	Weight	Code number
DN	mm	mm	mm	mm	kg
50x50x50	200	160	125	85	2,5	155770

Bend PAM-GLOBAL® Plus 88˚ with elongated side 250mm

Details

Nominal internal diameter	X₁	X₂	K	Weight	Code number
DN	mm	mm	mm	kg
100	250	110	140	3,6	155242

WC Special multiple branch PAM-GLOBAL® S, right hand

Details

Nominal internal diameter	Range	Weight	Code number
DN		kg
100	Right	6,00	155847

Hutterer & Lechner Cover plate for HL 138 [Code number: HL 0138.2E] (Russia)

Details

HL 0138.2E

716 rub

Application area:

For air condition and ventilation

Characteristics:

Material: ABS (PS)

Weight: 0,03 kg

Hutterer & Lechner Trap seal cartridge for HL520-series [Code number: HL 0520.2E]

Details

HL 0520.2E

890 rub

Application area:

For shower trays

Characteristics:

Material: EPDM

Weight: 0,048 kg

Packaging data (PE-bag)

Height	Width	Depth	Weight	Volume
mm	mm	mm	kg	m3
70	120	120	0,05	0,001008000

Hutterer & Lechner Space saver tubular trap with connector DN40x1 1/2' for double sinks, ball-joint outlet, DN50x1 1/2' [Code number: HL 126.2/50]

Details

HL 126.2/50

6 169 rub

Space saver tubular trap HL 126.2/50 DN 50 horizontal is made of polypropylene. This device is designed so that it saves a lot of space under a sink, and trap is equipped with ball-joint outlet. Trap with connector DN40 x 1 1/2' for double sinks.

Diameter	Material	Weight
DN, mm		gr
50	polypropylene	590

Hutterer & Lechner Concealed trap with removable trap insert, DN50 [Code number: HL 134.0/50]

Details

HL 134.0/50

3 211 rub

HL 134.0/50 concealed trap is embedded into the wall. HL 134.0/50 is made of polypropylene, it has diameter of 50 mm and capacity of 0.38 l/s. Trap insert can be removed if necessary.

Diameter	Material	Capacity	Weight
DN, mm		l/s	gr
50	polypropylene	0,38	385

Hutterer & Lechner Elbow and tube, DN40x1 1/2' [Code number: HL 16]

Details

HL 16

1 069 rub

Application area:

For bath

Characteristics:

Material: PP
Size: DN40
Includes 6/4" swivel nut
Acts as an extension

Weight: 0.080 kg.

Double branch PAM-GLOBAL® S 88˚ with elongated side

Details

Nominal internal diameter	L	H	W	b	c	d	p	q	r	Weight	Code number
DN										kg
100x100x100	243	405	110	110	120	295	222	244	354	5,9	176883

Dimensions are presented in mm

Photo Manifold connectors PAM-GLOBAL® S multi-waste

Manifold connectors PAM-GLOBAL® S multi-waste

Details

Nominal internal diameter	L	H	W	a	d	e	Weight	Code number
DN	mm	mm	mm	mm	mm	mm	kg
100	204	125	200	43	142	62	3,2	175626
150	265	165	290	70	184	81	6,1	175629

Single long arm branch PAM-GLOBAL® S

Details

Nominal internal diameter	L	H	W	a	b	c	p	Weight	Code number
DN								kg
100x100	282	450	110	450	282	70	340	6	156726

Dimensions are presented in mm

Double bend PAM-GLOBAL® Plus 88˚

Details

Nominal internal diameter	L	H	W	a	b	c	o	Weight	Code number
DN	mm	mm	mm	mm	mm	mm	mm	kg
50	148	148	58	121	50	100	148	1	179343
75	183	183	83	145	60	120	183	1,5	235801
100	228	228	110	170	70	140	228	2,8	155359
150	303	303	160	219	90	180	303	6,3	155422

Bend PAM-GLOBAL® S 88˚ (two joint bends 44˚)

Details

According to DIN 1986, part 1, section 6.1.2, the changes of the direction of main pipelines and sewers may be fulfilled only with using prefabricated pipe bend, and each individual bend can have a maximum angle of 45^˚. In some cases, for these purposes can be used two pipe bends 45^˚. Due to the double knee one connecting element is saved and the installation becomes easier. In addition, this fitting provides a good opportunity to place the fastening element in its middle. The bend is also intended for use as a transition from the riser to a horizontal pipe, and vice versa.

Nominal internal diameter	X₁	X₂	X₃	Weight	Code number
DN	mm	mm	mm	kg
50	50	100	121	1,0	155754
70*	60	120	145	1,4	155783
80	60	120	145	1,5	176707
100	70	140	170	3,1	155819
125	80	160	195	4,2	155872
150	90	180	219	7,0	155905

*Diameter 80 gradually replace diameter 70

REHAU RAUPIANO PLUS lock to cap, d - 110 [Code number: 11230001001 / 123 000 001]

Details

11230001001

1 486 rub

Rehau RAUPIANO PLUS lock to cap is used when installing sound absorbing sewerage system RAUPIANO PLUS for fast and durable fixation of pipe cap. It is made of strip steel.

For pipe caps with diameter of 110 mm.

Dy	Weight
mm	kg/pc
110	0,226

Hutterer & Lechner Lip seal for HL 136N [Code number: HL 01088D]

Details

HL 01088D

890 rub

Characteristics of HL sewage equipment:

Complies with ISO 9001
Safety for ecology and health
Products undergo laboratory testing
Durability
Attractive appearance

Suitable for	Weight
	kg/pc
HL 136N	0,001