Logo
Ru| En

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Name Article Price
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 359.441.00.2] - Geberit HDPE Clamp connector, d 108 - 110, d1 108 - 110 [Code number: 359.441.00.1] Draft [NO LONGER PRODUCED. REPLACEMENT: 359.441.00.2] - Geberit HDPE Clamp connector, d 108 - 110, d1 108 - 110 [Code number: 359.441.00.1]
[NO LONGER PRODUCED. REPLACEMENT: 359.441.00.2] - Geberit HDPE Clamp connector, d 108 - 110, d1 108 - 110 [Code number: 359.441.00.1]
Details 		359.441.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Scope of delivery:

  • Screws (2 pcs)

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
108 - 110 108 - 110 12,5 5,6 2,6 0,4
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN10, d - 50 [Code number: 20126115] Draft Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN10, d - 50 [Code number: 20126115]
Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN10, d - 50 [Code number: 20126115]
Details 		20126115

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 10 bar. It is used for changing the direction of the pipeline by 45°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar mm mm mm
10 50 40 35
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-branch fitting 90° with female thread, PVC-U, PN10, d1 - 90, d2 - 3" [Code number: 20140915] Draft Wavin PVC Pressure Pipe systems T-branch fitting 90° with female thread, PVC-U, PN10, d1 - 90, d2 - 3" [Code number: 20140915]
Wavin PVC Pressure Pipe systems T-branch fitting 90° with female thread, PVC-U, PN10, d1 - 90, d2 - 3" [Code number: 20140915]
Details 		20140915

ATTENTION! This product is temporarily unavailable for order!

d1 d2 В С Type PN
mm   mm mm   bar
90 3" 51 41 В 10
Photo Draft
Photo Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 600mm [Code number: HL 050D/60] Draft Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 600mm [Code number: HL 050D/60]
Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 600mm [Code number: HL 050D/60]
Details 		HL 050D/60 23 607 rub

HL 050D/60 - it is stainless steel cover "Design", it is length is 500 mm. Height of the cover is adjustable. You can insert tile on the cover with mastic but mastic layer thickness should not be more than 19 mm. The cover has a welded on plate 3mm. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
500 5 - 19 stainless steel
matt		 300 872
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 0,88 0
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 359.440.00.2] - Geberit HDPE Clamp connector, d 108 - 110, d1 106 [Code number: 359.440.00.1] Draft [NO LONGER PRODUCED. REPLACEMENT: 359.440.00.2] - Geberit HDPE Clamp connector, d 108 - 110, d1 106 [Code number: 359.440.00.1]
[NO LONGER PRODUCED. REPLACEMENT: 359.440.00.2] - Geberit HDPE Clamp connector, d 108 - 110, d1 106 [Code number: 359.440.00.1]
Details 		359.440.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Scope of delivery:

  • Screws (2 pcs)

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
108 - 110 106 12,5 5,6 2,6 0,4
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN10, d - 63 [Code number: 20134115] Draft Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN10, d - 63 [Code number: 20134115]
Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN10, d - 63 [Code number: 20134115]
Details 		20134115

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 10 bar. It is used for changing the direction of the pipeline by 45°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar mm mm mm
10 63 46 43
Photo Draft
Photo Wavin PVC Pressure Pipe systems T-branch fitting 90° with female thread, PVC-U, PN16, d1 - 110, d2 - 4" [Code number: 20146915] Draft Wavin PVC Pressure Pipe systems T-branch fitting 90° with female thread, PVC-U, PN16, d1 - 110, d2 - 4" [Code number: 20146915]
Wavin PVC Pressure Pipe systems T-branch fitting 90° with female thread, PVC-U, PN16, d1 - 110, d2 - 4" [Code number: 20146915]
Details 		20146915

ATTENTION! This product is temporarily unavailable for order!

d1 d2 В С Type PN
mm   mm mm   bar
110 4" 61 41 В 16
Photo Draft
Photo Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 2100mm [Code number: HL 050D/210] Draft Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 2100mm [Code number: HL 050D/210]
Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 2100mm [Code number: HL 050D/210]
Details 		HL 050D/210 86 496 rub

HL 050D/210 - it is stainless steel cover "Design" for gutter length 2100 mm, it is length is 2000 mm. Height of the cover is adjustable. You can glue tile on the cover with mastic but mastic layer thickness should not be more than 19 mm. The cover has a welded on plate 3mm. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
2000 5 - 19 stainless steel
matt		 300 3764
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 3,34 0
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 359.439.00.2] - Geberit HDPE Clamp connector, d 89 - 90, d1 96 [Code number: 359.439.00.1] Draft [NO LONGER PRODUCED. REPLACEMENT: 359.439.00.2] - Geberit HDPE Clamp connector, d 89 - 90, d1 96 [Code number: 359.439.00.1]
[NO LONGER PRODUCED. REPLACEMENT: 359.439.00.2] - Geberit HDPE Clamp connector, d 89 - 90, d1 96 [Code number: 359.439.00.1]
Details 		359.439.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Scope of delivery:

  • Screws (2 pcs)

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
89 - 90 96 11,1 5,6 2,6 0,4
Photo Draft
Photo Wavin PVC Pressure Pipe systems Y-branch fitting 45°, PVC-U, PN16, d - 50x50 [Code number: 20126826] Draft Wavin PVC Pressure Pipe systems Y-branch fitting 45°, PVC-U, PN16, d - 50x50 [Code number: 20126826]
Wavin PVC Pressure Pipe systems Y-branch fitting 45°, PVC-U, PN16, d - 50x50 [Code number: 20126826]
Details 		20126826

ATTENTION! This product is temporarily unavailable for order!

d Z1 Z2 В PN
mm mm mm mm bar
50 69 12 31 16
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN10, d - 75 [Code number: 20137115] Draft Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN10, d - 75 [Code number: 20137115]
Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN10, d - 75 [Code number: 20137115]
Details 		20137115

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 10 bar. It is used for changing the direction of the pipeline by 45°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar mm mm mm
10 75 54 51
Photo Draft
Photo Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 1800mm [Code number: HL 050D/180] Draft Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 1800mm [Code number: HL 050D/180]
Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 1800mm [Code number: HL 050D/180]
Details 		HL 050D/180 70 350 rub

HL 050D/180 - it is cover "Design", it is length is 1700 mm. Height of the cover is adjustable. You can insert tile on the cover with mastic but mastic layer thickness should not be more than 19 mm. The cover is made of stainless steel. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
1700 5 - 19 stainless steel
matt		 300 3146
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 2,864 0
Photo Draft
Photo [NO LONGER PRODUCED] - Geberit HDPE Clamp connector, d 89 - 90, d1 89 - 90 [Code number: 359.438.00.1] Draft [NO LONGER PRODUCED] - Geberit HDPE Clamp connector, d 89 - 90, d1 89 - 90 [Code number: 359.438.00.1]
[NO LONGER PRODUCED] - Geberit HDPE Clamp connector, d 89 - 90, d1 89 - 90 [Code number: 359.438.00.1]
Details 		359.438.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Scope of delivery:

  • Screws (2 pcs)

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
89 - 90 89 - 90 10,5 5,6 2,6 0,4
Photo Draft
Photo Wavin PVC Pressure Pipe systems Y-branch fitting 45°, PVC-U, PN10, d - 63x63 [Code number: 20134926] Draft Wavin PVC Pressure Pipe systems Y-branch fitting 45°, PVC-U, PN10, d - 63x63 [Code number: 20134926]
Wavin PVC Pressure Pipe systems Y-branch fitting 45°, PVC-U, PN10, d - 63x63 [Code number: 20134926]
Details 		20134926

ATTENTION! This product is temporarily unavailable for order!

d Z1 Z2 В PN
mm mm mm mm bar
63 86 14 38 10
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN10, d - 90 [Code number: 20140115] Draft Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN10, d - 90 [Code number: 20140115]
Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN10, d - 90 [Code number: 20140115]
Details 		20140115

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 10 bar. It is used for changing the direction of the pipeline by 45°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar mm mm mm
10 90 63 58
Photo Draft
Photo Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 1700mm [Code number: HL 050D/170] Draft Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 1700mm [Code number: HL 050D/170]
Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 1700mm [Code number: HL 050D/170]
Details 		HL 050D/170 65 150 rub

HL 050D/170 - it is stainless steel cover "Design", it is length is 1600 mm. Height of the cover is adjustable. You can insert tile on the cover with mastic but mastic layer thickness should not be more than 19 mm. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
1600 5 - 19 stainless steel
matt		 300 2940
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 2,704 0
Photo Draft
Photo [NO LONGER PRODUCED] - Geberit HDPE Clamp connector, d 89 - 90, d1 83 - 84 [Code number: 359.437.00.1] Draft [NO LONGER PRODUCED] - Geberit HDPE Clamp connector, d 89 - 90, d1 83 - 84 [Code number: 359.437.00.1]
[NO LONGER PRODUCED] - Geberit HDPE Clamp connector, d 89 - 90, d1 83 - 84 [Code number: 359.437.00.1]
Details 		359.437.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Scope of delivery:

  • Screws (2 pcs)

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
89 - 90 83 - 84 10,5 5,6 2,6 0,4
Photo Draft
Photo Wavin PVC Pressure Pipe systems Y-branch fitting 45°, PVC-U, PN10, d - 75x75 [Code number: 20137926] Draft Wavin PVC Pressure Pipe systems Y-branch fitting 45°, PVC-U, PN10, d - 75x75 [Code number: 20137926]
Wavin PVC Pressure Pipe systems Y-branch fitting 45°, PVC-U, PN10, d - 75x75 [Code number: 20137926]
Details 		20137926

ATTENTION! This product is temporarily unavailable for order!

d Z1 Z2 В PN
mm mm mm mm bar
75 102 17 44 10
Photo Draft
Photo Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN12,5, d - 110 [Code number: 20146115] Draft Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN12,5, d - 110 [Code number: 20146115]
Wavin PVC Pressure Pipe systems Bend 45°, PVC-U, PN12,5, d - 110 [Code number: 20146115]
Details 		20146115

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For pressure drainage systems

Description

Wavin bend for pressure piping systems can be used for installation of pipeline with pressure up to 12,5 bar. It is used for changing the direction of the pipeline by 45°. You can see the appearance of bend and its dimensions in the photo and draft.

The main advantages of Wavin PVC Pressure Pipe systems:

  • Ease of elements;
  • High resistance to corrosion;
  • Excellent hydraulic performance;
  • High strength;
  • Ease of installation etc.

Technical characteristics

Material: unplasticized PVC

PN d Z B
bar mm mm mm
12,5 110 80 70
Photo Draft
Photo Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 1500mm [Code number: HL 050D/150] Draft Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 1500mm [Code number: HL 050D/150]
Hutterer & Lechner Stainless steel cover 'Design', fitting to gutter length 1500mm [Code number: HL 050D/150]
Details 		HL 050D/150 54 701 rub

HL 050D/150 - it is stainless steel cover "Design", it is length is 1400 mm. Height of the cover is adjustable. You can insert tile on the cover with mastic but mastic layer thickness should not be more than 19 mm. The cover has a welded on plate 3mm. It can endure load up to 300 kg.

Size, mm Material Load Weight
L H   kg gr
1400 5 - 19 stainless steel
matt		 300 2528
 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 2,384 0

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited