Fittings for domestic sewerage

Watch products by Brands

When installing internal sewage, special fittings are used that are connected to pipes:

Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
Crosses are used to create two branches (in some cases three) from the main pipeline.
Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
Reducers are used to connect sewer pipes with different diameters.
Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
Siphons are mounted with sanitary equipment.
Brackets allow you to rigidly fix the pipeline system.
Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.

Photo Наименование Article Цена

Hutterer & Lechner Visual parts solid brass, chrome plated [Code number: HL 555N.1]

Details

HL 555N.1

4 144 rub

Application purposes:

For waste and overflow assembly

Characteristics:

chrome plated

Material: MS - beschichtet

Weight: 0,305 kg

Hutterer & Lechner Double appliance hose connector, 1 1/2' x 3/4' [Code number: HL 6]

Details

HL 6

1 463 rub

The connecting element HL 6 is used to connect equipment such as washing machines and dishwashers. Double appliance hose connector 1 1/2' x 3/4', it is made of polypropylene.

Diameter	Material	Weight
inch		gr
6/4"" х 1"	polypropylene	60

Corner branch PAM-GLOBAL® S 68˚

Details

Nominal internal diameter	L	H	W	b	c	d	p	q	r	Weight	Code number
DN										kg
75x75x75	158	180	158	110	110	70	149	72	36	2,1	156548
100x100x100	195	220	195	130	130	90	189	87	50	3,5	156714

Dimensions are presented in mm

PAM-GLOBAL® S Single stack branches

Details

Diameter	Lateral adjustments	L	H	W	O	p	q	Weight	Code number
DN		mm	mm	mm	mm	mm	mm	kg
100	3 consecutive 90° DN100	280	490	230	392	140	281	11,0	177237
100	2 DN100 90°	230	490	230	392	140	281	10,4	177236
100	3 DN100 180°	280	490	180	392	140	281	10,8	177235

Bend PAM-GLOBAL® Plus 88˚ (two joint bends 44) and soothing area 250mm

Details

Nominal internal diameter	X₁	X₂	X₃	Weight	Code number
DN	mm	mm	mm	kg
100	70	312	291	4,8	155240
125	80	322	308	6,1	179341
150	90	334	326	9,6	179342

The bend is used for the transition from the risers to the decelerated areas of the system. According to DIN 1986, Part 1 in respect of risers, which run from 4 to 8 stories or have length from 10 to 22 m, special stowage arrangements are necessary. Transitions in horizontal pipelines, as well as the bend on the sides of the supply and runoff during the joint laying, must be separated by inserting of length of 250 mm.

PAM-GLOBAL® S Bend 88° with 250 mm calming section

Details

Nominal internal diameter	X₁	X₂	X₃	Weight	Code number
DN	mm	mm	mm	kg
70	60	301	273	2.8	155784
80	60	301	273	2.9	179679
100	70	312	291	4.8	155820
125	80	322	308	6.1	155873
150	90	334	326	9.6	155906

REHAU RAUPIANO PLUS lock to cap, d - 200 [Code number: 11230061001 / 123 006 001]

Details

11230061001

1 815 rub

Rehau RAUPIANO PLUS lock to cap is used when installing sound absorbing sewerage system RAUPIANO PLUS for fast and durable fixation of pipe cap. It is made of strip steel.

For pipe caps with diameter of 200 mm.

Dy	Weight
mm	kg/pc
200	0,358

Hutterer & Lechner Trap seal cartridge for HL 522 [Code number: HL 0522.2E]

Details

HL 0522.2E

1 720 rub

Application area:

For shower trays

Weight: 0,06 kg

It suitable for use with HL522V.0, HL522V.

Packaging data (PE-bag)

Height	Width	Depth	Weight	Volume
mm	mm	mm	kg	m3
60	80	80	0,066	0,000384000

Photo Hutterer & Lechner Concealed trap assembly, consisting of HL134.0, HL44, 2 water feeds solid brass and HL42, DN50 [Code number: HL 134/50]

Hutterer & Lechner Concealed trap assembly, consisting of HL134.0, HL44, 2 water feeds solid brass and HL42, DN50 [Code number: HL 134/50]

Details

HL 134/50

10 963 rub

HL 134/50 concealed trap assembly DN50 is embedded into the wall. Capacity of HL 134/50 is 0,38 l/s. Trap insert can be removed if necessary. There is a mounting plate HL 44 in which are fixed mounting angles 1/2"B. Also, the trap has test plugs HL 42.B and HL 42.R.

Diameter	Material	Capacity	Weight
DN, mm		l/s	gr
50	polypropylene	0,38	885

Hutterer & Lechner Rosette elastic, DN32 [Code number: HL 8EL/30]

Details

HL 8EL/30

495 rub

Rosette elastic HL 8EL/30 is designed for using with HL traps. Diameter is 32 mm, height is 39 mm. It is made of PE.

Diameter	Material	Weight
DN, mm		gr
32	PE	8

PAM-GLOBAL® S Offset bends 65, 130, 200 mm

Details

Nominal internal diameter	L	H	W	b	c	Weight	Code number
DN	mm	mm	mm	mm	mm	kg
50	133	185	58	75	35	1.1	156386
75	158	200	83	75	39	1.5	156478
75	233	230	83	150	45	2.3	156482
100	175	205	110	65	70	2	155812
100	185	215	110	75	41	2.5	156596
100	240	270	110	130	70	3.7	155821
100	260	250	110	150	47	3.3	156604
100	310	340	110	200	70	4.2	155822
125	210	236	135	75	46	3.7	156759
125	285	270	135	150	48	4.8	156764
150	235	255	160	75	51	5.1	156853
150	310	300	160	150	56	6.7	156858
200	285	295	210	75	61	8.3	156972
200	360	350	210	150	64	10.8	156976

PAM-GLOBAL® Plus Offset bend 130 mm

Details

Nominal internal diameter	X	L	Weight	Code number
DN	mm	mm	kg
100	70	270	3,7	155241

Photo Corner branch PAM-GLOBAL® S 68˚ with elongated side

Corner branch PAM-GLOBAL® S 68˚ with elongated side

Details

Nominal internal diameter	L	H	W	b	c	d	p	q	r	Weight	Code number
DN										kg
100x100x100	195	414	195	130	130	284	383	244	281	5,1	176943

Dimensions are presented in mm

(DISCONTINUED) - REHAU RAUTITAN support connection for bend or siphon [Code number: 11373451001 / 137 345 001]

Details

11373451001

Rehau RAUTITAN support connection for bend or siphon is used in case when you need to make a siphon or bend to the REHAU brackets. Comes with three nuts, washer and screw M8. It is made of galvanized steel.

a	b	Weight
mm	mm	kg/pc
40	40	0,099

Hutterer & Lechner Waste valve core, 3-23mm [Code number: HL 0522.1E]

Details

HL 0522.1E

1 699 rub

Photo Hutterer & Lechner Concealed trap assembly, consisting of HL134.0, HL44, DN40 [Code number: HL 134.2/40]

Hutterer & Lechner Concealed trap assembly, consisting of HL134.0, HL44, DN40 [Code number: HL 134.2/40]

Details

HL 134.2/40

5 078 rub

Application area:

For wash basins

Characteristics:

Material: PP
Dimension: DN40
Capacity: 0,38 l/sec

Weight: 0,56 kg

Packaging data (PE-bag)

Height	Width	Depth	Weight	Volume
mm	mm	mm	kg	m3
140	200	270	0,574	0,007560000

Hutterer & Lechner Recessed washing device trap with decorative connector, DN40/50 [Code number: HL 400.C]

Details

HL 400.C

4 888 rub

Hutterer & Lechner Rosette elastic, DN40 [Code number: HL 8EL/40]

Details

HL 8EL/40

495 rub

Rosette elastic HL 8EL/40 is designed for using with HL traps. Diameter is 40 mm, height is 39 mm.

Diameter	Material	Weight
DN, mm		gr
40	PE	10

Long radius bend PAM-GLOBAL® S 88˚

Details

Nominal internal diameter	L	H	W	a	b	Weight	Code number
DN	mm	mm	mm	mm	mm	kg
100	324	324	110	269	230	4,2	156606
150	349	349	160	274	210	8	156860

PAM-GLOBAL® Plus Object connection bend 90° for wash-basins, sinks and urinal units

Details

Nominal internal diameter	X₁	X₂	K₁	K₂	Weight	Code number
DN	mm	mm	mm	mm	kg
50 x 50	200	110	120	25	1,4	155205
50 x 60	200	110	120	30	1,6	155206